This paper presents a novel recovery technique for a fixed-wing UAV (Unmanned Aerial Vehicle) based on constrained optimization: i) we propose a trajectory generation for landing the UAV where it first reduces its altitude by deep stalling, then perches on a recovery net, ii) we design an NMPC (Nonlinear Model Predictive Control) tracking controller with terminal constraints for the optimal generated trajectory under disturbances. Compared to nominal net recovery procedures, this technique greatly reduces the landing time and the final airspeed of the UAV. Simulation results for various wind conditions demonstrate the feasibility of the idea.
This paper proposes a two-layer hierarchical control scheme for trajectory tracking of a multicopter system using attitude quaternion. We first present the differential flatness properties of the system and then, exploit them to design the feedback linearization laws for the position controller at the high control level. Next, the computed-torque control method is employed for stabilizing the attitude quaternion. The whole control scheme is illustrated through simulations while the position controller is further tested under experiments over a nano-drone quadcopter platform.
We consider a motorized aircraft tethered to a central anchorage point in a configuration similar to a control line model airplane. For this system, we address the problem of automatic take-off and landing (ATOL) with a circular path, whose center and radius are defined by the anchorage point and the tether length, respectively. We propose a hierarchical control architecture for ATOL and discuss the controllers designed for each control layer and for each of the flight phases. Simulation results are reported, showing the viability of the approach, but also showing the limitations on the maximum altitude attainable with a fixed-tether length. The tethered aircraft and the proposed ATOL control architecture are to be used in an Airborne Wind Energy System.