ibrahim Şen

Dr. ibrahim Şen

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 March 2025 in Polymer Bulletin
Verified
Journal Article
Open access
PDF file
IŞibrahim Şen
ibrahim Şen
KSKutlay Sever
Kutlay Sever
The objective of this study was to obtain new composites containing polylactic acid (PLA) with artichoke stem (AP) at concentrations of 1%, 3%, 5%, 7%, and 10% by weight using a twin-screw extruder. The composites were created using biodegradable PLA and postharvest agricultural waste AP. The study aimed to determine whether these composites could be used. Thermal, mechanical, and morphological characterization of AP and these composites were performed. The findings of the study revealed that AP particles exhibited chemical and physical properties similar to other natural fibers. When incorporated into composites, these materials showed increased density and elastic modulus. However, decreases in tensile strength, elongation at break, and unnotched Izod impact were observed. Dynamic mechanical analysis revealed that PLA exhibited higher storage modulus (E′) values compared to AP-filled composites at 40 °C. In the differential scanning calorimetry analysis, while there was a slight fluctuation in the glass transition temperature (T g) in the AP-filled composites, significant increases in the crystallinity degree (X c) were observed when looking at the values of PLA. The results of the thermal gravimetric analysis showed that both T max and T s values of the composite decreased as the AP content in PLA increased. Furthermore, SEM imaging of the composites containing P5AP clearly demonstrated the presence and distribution of AP particles within the PLA matrix. Graphical abstract

30 October 2024 in Journal of Cleaner Production
Verified
Journal Article
Closed access
IŞibrahim Şen
ibrahim Şen
STSibel Tuna
Sibel Tuna
MKMeral AKKOYUN KURTLU
Meral AKKOYUN KURTLU

10 March 2024 in Journal of Composite Materials
Verified
Journal Article
Closed access
IŞibrahim Şen
ibrahim Şen
Polylactic acid (PLA) film composites filled with two clays, Raw Kaolin (KAO), an inorganic structure, and Leonardite (LEO), an organic structure, as well as KAO/LEO mixtures, were prepared via solvent casting method. The main aim of this research was to investigate both the individual and the synergetic effects of LEO and KAO; they are incorporated together into a PLA matrix. The influence of these fillers content on the morphological and structural characteristics of the composites was investigated by the DSC, TGA, FT-IR, SEM, XRD, color, haze, and opacity analysis. According to the TGA analysis, significant decreases in Tmax2 were observed with the addition of LEO in PLA. It is also seen in films with KAO/LEO that support this result. Utilizing the solvent casting method, two melting points were formed in PLA films. The P0 film has lower Tg, Tcc, and Tm1 values than other films. However, there were small changes in Tg and Tm2 values in all films. Up to 7.5% amount of LEO and KAO, the mechanical properties of the films improved. The 3L film exhibited the best mechanical properties. The filler materials used were mostly homogeneously distributed, according to the SEM analysis, and as the amount increased, agglomerations were observed in the fillings on the surface. The addition of LEO and KAO changed the surface color, visual appearance, and opacity significantly. The haze values of films are near 100. These film composites have been shown to improve many properties of the P0 film.

28 February 2025 in Sakarya University Journal of Science
Verified
Journal Article
Open access
PDF file
STSibel Tuna
Sibel Tuna
IŞibrahim Şen
ibrahim Şen
Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread in order to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene (LDPE), which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives (OS), which have an important place in Turkey's agriculture and economy, and the density, hardness (Shore D), spectroscopic (Fourier transform infrared (FTIR) spectroscopy), morphological (Scanning electron microscopy (SEM)), mechanical, thermal (Differential Scanning Calorimetry (DSC), Heat Deflection Temperature (HDT) and Vicat softening temperature) analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.

1 January 2024 in International Journal of Polymer Science
Verified
Journal Article
Open access
IŞibrahim Şen
ibrahim Şen
MAMetehan Atagür
Metehan Atagür
STSibel Tuna
Sibel Tuna
MEMurat Eroğlu
Murat Eroğlu
MKMeral Akkoyun Kurtlu
Meral Akkoyun Kurtlu
KSKutlay Sever
Kutlay Sever
Polylactic acid (PLA) was modified with three types of modified vegetable oils (MVOs), which are the epoxidized soybean oil (ESBO), maleinized sunflower oil (MSO), and maleinized olive oil (MOO), at different weight fractions. A corotating twin screw extruder was used to produce composite materials by the melt‐mixing process. The effect of MVO content, from 2.5% to 10%, on the morphology, mechanical properties, density, and water absorption was investigated in detail. The addition of ESBO and maleinized vegetable oils leads to a slight decrease in the density of PLA from 1.252 to 1.231 g/cm3. As the concentration of MVO in PLA increases, the amount of water absorption also increases, and the highest water absorption value was observed in P10MSO. The FTIR spectra of all concentrations of the MOO and MSO have two peaks at 1781 and 1861 cm−1, attributed to the C=O stretching which is related to maleic acid copolymerization. In general, the elastic modulus (EM) was slightly changed by the addition of MVOs to PLA, while the tensile strength (TS) decreased. Due to the plasticizing effect of MVOs, an increase in the Izod impact strength was obtained.

22 April 2025 in Polymer Bulletin
Verified
Journal Article
Closed access
PDF file
STSibel Tuna
Sibel Tuna
IŞibrahim Şen
ibrahim Şen