In this contribution, we investigated the properties of magnetron-sputtered TiN thin films on sapphire and quartz substrates before and after 5 MeV electron irradiation with a fluence of 7 × 10¹³ e/cm². Structural, morphological, optical, and electrical properties were analyzed to observe the impact of electron irradiation on the TiN thin films. The results showed improved electrical properties of the TiN thin films due to high-energy electron irradiation, resulting in increased specific conductivity compared to the as-deposited thin films on both sapphire and quartz substrates. The structural features of the TiN thin films on the sapphire substrate transformed from polycrystalline to amorphous, while the TiN thin films deposited on the quartz substrate remained unchanged. Chemical state analysis indicated changes in the metallic bonding between Ti and N in the deposited TiN on the sapphire substrate, while TiN deposited on the quartz substrate retained its Ti-N bonding. This study provides insights into the effects of electron irradiation on TiN thin films, emphasizing the importance of investigating radiation resistance for the reliable operation of optoelectronic devices and photovoltaic systems in extreme ionizing radiation environments.

In this work, a complex experimental study of the effect of electron and proton ionizing radiation on the properties of carbon nanowalls (CNWs) is carried out using various state-of-the-art materials characterization techniques. CNW layers on quartz substrates were exposed to 5 MeV electron and 1.8 MeV proton irradiation with accumulated fluences of 7 × 10¹³ e/cm² and 10¹² p/cm², respectively. It is found that depending on the type of irradiation (electron or proton), the morphology and structural properties of CNWs change; in particular, the wall density decreases, and the sp² hybridization component increases. The morphological and structural changes in turn lead to changes in the electronic, optical, and electrical characteristics of the material, in particular, change in the work function, improvement in optical transmission, an increase in the surface resistance, and a decrease in the specific conductivity of the CNW films. Lastly, this study highlights the potential of CNWs as nanostructured functional materials for novel high-performance radiation-resistant electronic and optoelectronic devices.

Ensuring the safety and extending the shelf life of chilled poultry meat is vital in modern poultry meat production, particularly given the recent increase in demand in this area. Chilled meat has a short shelf life, so producers have limited time to sell their products and must rely on various methods of extending shelf life. Compared with other non-thermal methods, electron beam irradiation is a new non-thermal meat preservation technique with low cost, avoidance of contamination, and antibacterial effects. In this study, we investigate the effect of electron beam irradiation on the microbiological and physicochemical quality of chilled poultry meat produced in Kazakhstan to assess its suitability for use in local food processing systems. The samples were electron-beam-treated at doses of 2, 4, 6, and 8 kGy and stored in a refrigerator. Microbiological and physicochemical property evaluations were carried out for a period of 14 days. Our results demonstrated a significant decrease in total aerobic and facultative anaerobic microorganisms, and no detectable levels of Salmonella spp. and Listeria monocytogenes in the irradiated samples. The pH measurements remained stable at low doses; in comparison, higher doses resulted in a slight decrease. Moisture, protein, fat, and ash content were also evaluated and showed minimal changes as functions of irradiation dose. Our results indicate that electron beam irradiation, particularly at a dose of 2–4 kGy, effectively improves microbiological safety and extends the shelf life of chilled poultry meat up to 5–6 days, making it a promising solution for the modern poultry meat industry.

Reducing post-harvest losses of cereal crops is a key challenge for ensuring global food security amid the limited arable land and growing population. This study investigates the effectiveness of electron beam irradiation (5 MeV, ILU-10 accelerator) as a physical decontamination method for various cereal crops cultivated in Kazakhstan. Samples were irradiated at doses ranging from 1 to 5 kGy, and microbiological indicators—including Quantity of Mesophilic Aerobic and Facultative Anaerobic Microorganisms (QMAFAnM), yeasts, and molds—were quantified according to national standards. Experimental results demonstrated an exponential decline in microbial contamination, with a >99% reduction achieved at doses of 4–5 kGy. The modeled inactivation kinetics showed strong agreement with the experimental data: R² = 0.995 for QMAFAnM and R² = 0.948 for mold, confirming the reliability of the exponential decay models. Additionally, key quality parameters—including protein content, moisture, and gluten—were evaluated post-irradiation. The results showed that protein levels remained largely stable across all doses, while slight but statistically insignificant fluctuations were observed in moisture and gluten contents. Principal component analysis and scatterplot matrix visualization confirmed clustering patterns related to radiation dose and crop type. The findings substantiate the feasibility of electron beam treatment as a scalable and safe technology for improving the microbiological quality and storage stability of cereal crops.

The article investigates the potential for producing hydrogen by combining the methods of water splitting under cavitation and the chemical activation of aluminum in a high-speed cavitation–jet flow generated by a specialized hydrodynamic reactor. The process of cavitation and water spraying causes the liquid heating itself until it reaches saturated vapor pressure, resulting in the creation of vapor–gaseous products from the splitting of water molecules. The producing of vapor–gaseous products can be explained through the theory of non-equilibrium low-temperature plasma formation within a high-speed cavitation–jet flow of fluid. Special focus is also given to the interactions occurring at the interface boundary phase of aluminum and liquid under cavitation condition. The primary solid products formed on aluminum surfaces are bayerite, copper oxides (I and II), iron carbide, and a compound of magnesium oxides and aluminum hydroxide. A high hydrogen yield of 60% was achieved when using a 0.1% sodium hydroxide solution as a working liquid compared to demineralized water. Moreover, hydrogen methane was also detected in the volume of the vapor–gas mixture, which could be utilized to address the challenges of decarbonization and the recycling of aluminum-containing solid industrial and domestic waste. This work provides a contribution to the study of the mechanism of hydrogen generation by cavitation–jet processing of water and aqueous alkali solutions, in which conditions are created for double cavitation in the cavitation–jet chamber of the hydrodynamic reactor.

The pressing issue of global warming, coupled with the increasing depletion of fossil fuels, highlights the necessity for sustainable energy solutions. In this context, hydrogen stands out as a viable option, possessing the capacity to revolutionize critical industries, including fuel cells, internal combustion engines, and gas turbines. An effective approach to enhancing numerous chemical and technological processes in liquid and steam–gas mixtures is the establishment of cavitation mixing zones for the reacting components. These zones are produced in specialized reactors that operate on the principles of hydrodynamic effects applied to the reaction medium. The study focused on the design of the cavitation-jet chamber utilizing the k–$\omega$ Turbulence Model and Particle Tracing Model. As a result, the influence of the inlet velocity on cavitation formation and the uniformity of mixing was investigated. Ripley’s K-function was used to analyze the results of particle distribution. The influence of the screw on flow turbulence and the uniformity of particles was evaluated. Analysis through the K-function indicated a decrease in uniformity at lower velocities, with noticeable turbulization of the flow occurring at high velocities, which facilitated better mixing. In contrast, without the screw, the flow exhibited a high longitudinal velocity and minimal transverse velocity, limiting particle dispersion to the radius of the nozzle and resulting in inefficient mixing. It was found that the inclusion of the screw not only enhanced particle distribution but also maintained the size of the cavitation zones, thereby improving the overall efficiency of the design.