Iman Ghaderi

Mr. Iman Ghaderi

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
HAHadi Amirahmadi
Hadi Amirahmadi
ABAmir Hossein Behravesh
Amir Hossein Behravesh
AAAli Amirahmadi
Ali Amirahmadi
IGIman Ghaderi
Iman Ghaderi
SHSeyyed Kaveh Hedayati
Seyyed Kaveh Hedayati
ABAmir Bakhtiyari
Amir Bakhtiyari
In this research, a screw-barrel system was designed and implemented, coupled with material extrusion, to print high-melt-temperature thermoplastic materials. The aim was to integrate two methods: the direct extrusion of thermoplastic polymer pellets with material extrusion,utilize various polymers in the form of pellets, especially high melt temperature ones, instead of traditional filaments. This addresses one of the significant challenges in filament preparation for various materials that are not readily available in the market or nearly impossible to fabricate (such as highly filled plastics). First, the screw-barrel assembly performance and factors influencing feed rate were evaluated. Subsequently, specimens were printed with polyether ether ketone (PEEK), an advanced plastic material known for its outstanding mechanical properties, high-temperature tolerance, and broad applications in various sectors, such as medical. Additionally, the material was reinforced with 2.5% continuous glass fibers while printing, which presented a novel product. Upon comparing theoretical values with experimental data from the tensile testing, a notable observation emerged: the inclusion of 2.5% glass fibers led to an approximate 43% increase in the tensile strength of the material. Furthermore, SEM images provided visual evidence of satisfactory adhesion between layers and fibers.

27 June 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
OKomid kordi
omid kordi
ABAmir Hossein Behravesh
Amir Hossein Behravesh
SHSadegh Hasannia
Sadegh Hasannia
SHSeyyed Kaveh Hedayati
Seyyed Kaveh Hedayati
MPMajid Pourghayoumi
Majid Pourghayoumi
IGIman Ghaderi
Iman Ghaderi
In this study, 3D printing of poly-l-lactic acid (PLLA) scaffolds reinforced with graphene oxide (GO) nanoparticles via Digital Light Processing (DLP) was investigated to mimic bone tissue. Stereolithography is one of the most accurate additive manufacturing method, but the dominant available materials used in this method are toxic. In this research, a biocompatible resin (PLLA) was synthetized and functionalized to serve the purpose. Due to the low mechanical properties of the printed product with the neat resin, graphene oxide nanoparticles in three levels (0.5, 1, and 1.5 Wt.%) were added with the aim of enhancing the mechanical properties. At first, the optimum post cure time of the neat resin was investigated. Consequently, all the parts were post-cured for three hours after printing. Due to the temperature-dependent structure of GO, all samples were placed in an oven at 85 ° C for different time periods of 0, 6, 12, and 18 hours to increase mechanical properties. The compression test of heat treated samples reveals that the compressive strength of the printed parts containing 0.5,1, and 1.5 % of GO increased by 151,162 ad 235%, respectively. Scaffolds with the designed pore sizes of 750 microns and a porosity of 40% were printed. Surface hydrophilicity test was performed for all samples showing that the hydrophilicity of the samples increased with increasing GO percentage. The degradation behavior of the samples was evaluated in a PBS environment, and it revealed that by increasing GO, the rate of component degradation increased, but the heat treatment had the opposite effect and decreased the degradation rate. Finally, besides improving biological properties, a significant increase in mechanical properties under compression can introduce the printed scaffolds as a suitable option for bone implants.

14 November 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
IGIman Ghaderi
Iman Ghaderi
ABAmir Hossein Behravesh
Amir Hossein Behravesh
SHSeyyed Kaveh Hedayati
Seyyed Kaveh Hedayati
SASeyed Alireza Alavinasab Ardebili
Seyed Alireza Alavinasab Ardebili
OKomid kordi
omid kordi
KGkhodayar Gholivand
khodayar Gholivand
In this study, an optimized multi-material system was designed and developed to print samples in various applications, including biomedical fields (e.g., mandibular bone loss). To improve the mechanical and biological properties of scaffolds utilized for dental bone loss applications, a multi-material setup was devised, which employs digital light processing technology. This setup consists of a linear system comprising two resin vats and one ultrasonic cleaning tank, enabling the integration of diverse materials and structures to optimize the composition of the scaffold. This approach was used to print multi-material PLLA scaffolds containing 20 wt.%. HA on the interior side, and PLLA containing 1 wt.% GO on the exterior surface of the scaffold, which were evaluated mechanically and biologically after printing. The scaffold was designed using a triply periodic minimal surface (TPMS) lattice structure, which is known to possess favorable mechanical and biological properties. Various multi-material samples were successfully printed and evaluated to illustrate the multiple-material setup's potential for ensuring proper function, cleaning, and adequate interface bonding. By numerically evaluating several TMPS structures, a novel Gyroid TPMS scaffold with a nominal porosity of 50% was developed and validated experimentally. The biological properties of the scaffolds were also evaluated, including surface morphology, (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) MTT assay, and cell adhesion. Based on the results, multi-material components with the least contaminations with suitable mechanical and biological properties were successfully printed. By combining PLLA-HA and PLLA-GO, this innovative technique holds tremendous potential for enhancing the effectiveness of regenerative procedures in the field of dentistry.

16 June 2026 in Biomedical Materials & Devices
Verified
Journal Article
Closed access
AMAmirali Milani
Amirali Milani
ABAmir Hossein Behravesh
Amir Hossein Behravesh
MHMohammad Amin Hooshmand
Mohammad Amin Hooshmand
MAMahdi Abdollahi
Mahdi Abdollahi
IGIman Ghaderi
Iman Ghaderi
GRGhaus Rizvi
Ghaus Rizvi