Imre Gellai

Mr. Imre Gellai

AIT Austrian Institute of Technology
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2020 in Energies
Verified
Journal Article
Open access
PDF file
DBDaniele Basciotti
Daniele Basciotti
Dominik DvorakDominik Dvorak
Dominik Dvorak
Imre GellaiImre Gellai
Imre Gellai
Climate control systems have a largely negative effect on the energy consumption of electric vehicles and consequently on their real driving range. Improving the efficiency of climate control systems requires advanced simulation tools for an accurate evaluation of both the energy savings and thermal comfort of innovative heating and cooling solutions. In this study, the advancements beyond the state of the art consists primarily of the methodology tackling the reduction of computational costs of intensive computational fluid dynamics (CFD) simulations and/or time-consuming experimental investigations and the simultaneous assessment of vehicle cabin thermal comfort and energy flows. The approach was validated against climatized chassis dyno measurements from the EU Horizon 2020 research project QUIET. Indeed, all the considered locations within the cabin were properly validated, both in steady state and transient conditions with the largest deviations at steady state below 3 °C. Additionally, the validation results show a perfect agreement for the average cabin predicted mean vote (PMV) value and a largest deviation in terms of the PMV for the other locations below 0.3. Furthermore, the applicability of the methodology is proved with the help of its application on a parametric study for which various cabin temperature setpoints and heating, ventilation and air conditioning (HVAC) modes were simulated in winter operation.

19 October 2020 in Energies
Verified
Journal Article
Open access
PDF file
Dominik DvorakDominik Dvorak
Dominik Dvorak
DBDaniele Basciotti
Daniele Basciotti
Imre GellaiImre Gellai
Imre Gellai
Thermal management systems of passenger vehicles are fundamental to provide adequate cabin thermal comfort. However, for battery electric vehicles they can use a significant amount of battery energy and thus reduce the real driving range. Indeed, when heating or cooling the vehicle cabin the thermal management system can consume up to 84% of the battery capacity. This study proposes a model-based approach to design an energy-efficient control strategy for heating electric vehicles, considering the entire climate control system at different ambient conditions. Specifically, the study aims at reducing the energy demand of the compressor and water pumps when operating in heat pump mode. At this scope, the climate control system of the reference vehicle is modelled and validated, enabling a system efficiency analysis in different operating points. Based on the system performance assessment, the optimized operating strategy for the compressor and the water pumps is elaborated and the results show that the demand-based control achieves up to 34% energy reduction when compared to the standard control.

26 February 2025 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
Dominik DvorakDominik Dvorak
Dominik Dvorak
MKMilan Kardos
Milan Kardos
Imre GellaiImre Gellai
Imre Gellai
Dragan ŠimićDragan Šimić
Dragan Šimić
Battery electric vehicles (BEVs) are one promising approach to mitigating local greenhouse gas emissions. However, they still lag behind conventional vehicles in terms of maximum driving range. Using the heating, ventilation, and air-conditioning (HVAC) system reduces the maximum driving range of the vehicle even further since the energy for the HVAC system must come from the battery. This work investigates the impact of (1) an air–air heat exchanger and (2) an improved thermal insulation of a truck cabin on the heating performance of the HVAC system. Additionally, the required fresh-air volume flow rate to keep the CO2 level within the truck cabin below the critical value of 1000 ppm is factored in. The results show that the two simple measures proposed could increase the energy efficiency of the truck’s HVAC system by 22%. When two persons are present in the truck cabin, a fresh-air volume flow of around 100 m3/h is required to keep the CO2 concentration around 1000 ppm. These results prove that, even with simple measures, the energy efficiency of vehicles’ subsystems can be increased. In the future, more research will be necessary to further improve the energy efficiency of other vehicular subsystems.

11 December 2024 in Engineering Modelling, Analysis and Simulation
Verified
Journal Article
Closed access
ATAustrian Institute of Technology
Austrian Institute of Technology
Imre GellaiImre Gellai
Imre Gellai
MPMirza Popovac
Mirza Popovac
MKMilan Kardos
Milan Kardos
DSDragan Simic
Dragan Simic
This paper presents the numerical analysis of the thermal performance of a truck cabin. The results obtained for a standard truck cabin setup are compared to the configurations with energy saving measures implemented. As a very promising energy efficiency measure, the application of the infrared panels is considered. Based on the radiative heat transfer mechanism, the infrared panels influence directly all inner cabin surfaces. This includes also the truck cabin occupants, whose perception of the indoor comfort reaches neutral values much faster and at lower ambient air temperatures. As a result, there is much lower energy demand for the cabin heating, required for maintaining the desired indoor comfort. The preliminary numerical analysis indicates the energy saving potential of around 30% for this innovative cabin thermal concept, as compared to the original energy demand for the traditional cabin heating configuration.

5 November 2025 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
Imre GellaiImre Gellai
Imre Gellai
MKMilan Kardos
Milan Kardos
MPMirza Popovac
Mirza Popovac
Dragan ŠimićDragan Šimić
Dragan Šimić
To reduce emissions in the existing transportation system and lower carbon dioxide (CO2) output, battery electric vehicles (BEVs) offer a promising approach due to their higher energy efficiency. However, their driving range still falls short compared to conventional vehicles. Optimizing the heating, ventilation, and air conditioning (HVAC) system can help save energy and improve passenger comfort. This study investigates an advanced thermal management system for an electric truck cabin with heating panels and added insulation. A one-dimensional (1D) cabin thermal model was also developed and validated with experimental data. The model integrates insulation, heating panels, and a 1D comfort simulation. It is functional mock-up unit (FMU) compatible and connects to larger system simulations and real-time applications. The results show that energy consumption can be reduced by up to 50% with these thermal measures. In the future, further research and new approaches will be necessary to identify even more efficient subsystems and cost-effective solutions.

3 December 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
Dominik DvorakDominik Dvorak
Dominik Dvorak
MKMilan Kardos
Milan Kardos
Imre GellaiImre Gellai
Imre Gellai
Dragan ŠimićDragan Šimić
Dragan Šimić
Battery electric vehicles (BEVs) are one promising measure to mitigate local greenhouse gas emissions. However, they still lack behind conventional vehicles in terms of maximum driving range. Using the heating, ventilation and air-conditioning (HVAC) system, even further reduces the maximum driving range of the vehicle because the energy for the HVAC system must be taken from the battery. In this paper we experimentally investigate the impact of 1) an air-air heat exchanger and 2) an improved thermal insulation of a truck cabin on the heating performance of the HVAC system. Additionally, we consider the required fresh-air volume flow rate to keep the CO2 level within the truck cabin below the critical value of 1000 ppm. The results show that the two proposed simple measures could increase the energy efficiency of the truck’s HVAC system by 22%. When two persons are present in the truck cabin, a fresh-air volume flow of around 100 m3/h is required to keep the CO2 concentration around 1000 ppm. These results prove that even with simple measures, the energy efficiency of vehicles’ subsystems can be increased. In future, more research will be necessary to further improve energy efficiency also of other vehicular subsystems.