Creep of cementitious materials results from the viscoelastic behavior of the reaction products of cement and water, called hydrates. In the present paper, a single isochoric creep function characterizing well-saturated portland cement hydrates is identified through downscaling of 500 different nonaging creep functions derived from three-minute-long tests on differently young cement pastes with three different initial water-to-cement mass ratios. A two-scale micromechanics representation of cement paste is used for downscaling. At a scale of 700 microns, spherical clinker inclusions are embedded in a continuous hydrate foam matrix. The latter is resolved, at the smaller scale of 20 microns, as a highly disordered arrangement of isotropically oriented hydrate needles, which are interacting with spherical water and air pores. Homogenization of viscoelastic properties is based on the correspondence principle, involving transformation of the time-dependent multiscale problem to the Laplace-Carson space, followed by quasi-elastic upscaling and numerical back-transformation. With water, air, and clinker behaving elastically according to well-accepted published data, the hydrates indeed show one single power-law-type creep behavior with a creep exponent being surprisingly close to those found for the different cement pastes tested. The general validity of the identified hydrate creep properties is further corroborated by using them for predicting the creep performance of a 30-year-old cement paste in a creep test lasting 30 days: the respective model predictions agree very well with results from creep experiments published in the open literature.
1 April 2022 in Journal of Materials in Civil Engineering
Emission of carbon dioxide ( ) either from the firing of clay bricks or from cement production, contributes considerably toward global warming. Conversely, the production of bricks is inevitable since a large number of bricks are needed to fulfill the housing sector demand. In this study, silty clay-based geopolymer bricks were produced incorporating fly ash and sugarcane bagasse ash. This was accomplished in two stages: the laboratory phase that comprised of production of cylindrical specimens, and the industrial phase whereby full-size bricks were produced based on the results obtained in the laboratory phase. The silty clay-based geopolymer bricks were developed with lesser energy input, i.e., forming pressure of 7 MPa with curing at ambient temperature. The whole set of mechanical and durability properties of the newly developed geopolymer brick yielded satisfactory results conforming to the standard codes. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results revealed the coexistence of sodium aluminosilicate gel (N─ A─ S─ H) and calcium aluminosilicate hydrate (C─ A─ S─ H), which led to a dense microstructure resulting in increased mechanical strength and ensuring enhanced durability of the brick structure. The environmental impact assessment confirmed the ecofriendly utilization of sugarcane bagasse ash in combination with fly ash in clay-based geopolymer bricks. The newly developed geopolymer can have a broad range of applications, including wall panel making, jet grouting, deep mixing, mortar for masonry constructions, canal lining, and grouting material used in backfill grouting during shield tunneling.
1 December 2017 in Journal of Nanomechanics and Micromechanics
Customary micromechanics models for the poroelasticity, creep, and strength of concrete restrict the domain affected by the hydration reaction to the cement paste volume, considering the latter as a thermodynamically closed system with respect to the (chemically inert) aggregate. Accordingly, the famous Powers hydration model appears to be a natural choice for the determination of clinker, cement, water, and aggregate volume fractions entering such micromechanical models. The situation changes once internal curing occurs, i.e., once part of the water present is absorbed initially by the aggregate, and then is sucked back to the cement paste during the hydration reaction. This paper develops an extended hydration model for this case, introducing water uptake capacity of the aggregate and paste void-filling extent as additional quantities. Based on constant values for just these two new quantities, and on previously determined creep properties of cement pastes as functions of an effective water:cement mass ratio (i.e., that associated with the cement paste domain rather than with the entire concrete volume), a series of ultrashort-term creep tests on different mortars and concretes can be very satisfactorily predicted by a standard microviscoelastic mathematical model. This further extends the applicability range of micromechanics modeling in cement and concrete research.
Owing to the increasing threat to environment due to the emission of greenhouse gases from cement industry globally, various promising solutions has been introduced in the past decades. The development of geoplymer concrete (GPC) is one of the contribution by the researches towards ecofriendly and sustainable construction. In this research, geopolymer concrete (GPC) is optimized by adding fixed amount of fly Ash (FA) and alkali activator to fine aggregate ratio as 0.5 with varying Molarity from 12 M to 16 M and /NaOH ratio from 1.5 to 2.5. Physical and mechanical properties along with effect of heat and ambient curing conditions were investigated at various ages. The optimized mixture of fly ash based geopolymer concrete was then up scaled by blending with locally available Metakaolin (MK) with different dosages (i.e., 10%, 20%, 30%, 40%). The aim of the study is to identify the binary effect of FA and MK on overall performance of geopolymer concrete. Results showed that 30% FA-MK based GPC depicted 21%, 19% and 26% more compressive strength, split tensile strength and flexural strength respectively than Fly Ash based GPC alone at heat cured condition. This can be explained mainly due to two facts namely binary action of metakaolin that enhances compaction of GPC and pozzolanic activity of MK that expedite geopolymeric strength causing phases. The results were further verified by Modified Chapelle test and FTIR. Morphology of the developed GPC is also examined from SEM images. The work is an effort to utilize the fly ash produced by coal power plants to effectively address UN sustainable development goal related to sustainable cities and communities.