The prediction of asphalt pavements performance in relation to the main distresses has been proposed by different researchers, by means of laboratory characterisation and field evaluation. With respect to fatigue, there are different approaches to determine what failure criterion to be considered, what testing conditions to be used and which specimens’ geometry to be produced. Tests performed in asphalt binders and mixtures have been recommended to characterise the fatigue resistance, and correlations among the several scales are proposed in order to make it more practical and more precise to predict the performance of asphalt layers. In terms of laboratory fatigue characterisation of asphalt mixtures, some of the most common tests are the four-point bending beam, diametral compression, the push-pull tests, among others. The characterisation of asphalt binders is also relevant, since fatigue is dependent on their rheological characteristics. Linear viscoelastic parameters of the binders, time sweep and amplitude sweep tests were used to rank three asphalt binders (one neat 30/45 penetration grade binder; one SBS-modified binder; and one highly modified asphalt, HiMA) in terms of fatigue behaviour. HiMA showed the highest fatigue resistance. One dense hot mix asphalt (HMA) mixture (prepared with the AC 30/45 neat binder) was characterised in terms of different fatigue test methods and correlated with binder tests, comparing the two scales approaches. The fatigue life of the asphalt mixture followed in agreement with results from the asphalt binder.
11 February 2014 in Road Materials and Pavement Design
Aggregate resistance to polishing and degradation can be related to the change in some of those aggregates particles’ characteristics. Polishing resistance can be related to the loss of surface texture, and it can affect asphalt pavements’ microtexture, influencing its skid resistance. Degradation resistance is related to the loss of angularity and to the aggregates’ breakage. It affects pavement distresses’ resistance and aggregate gradation. The methodologies used to evaluate these characteristics produce results that are mostly not representative. This paper aims to present a digital image processing (DIP) technique to evaluate aggregates’ resistance to polishing and degradation, along with the use of the Los Angeles abrasion equipment. The aggregate image measurement system was used to analyse the aggregates mainly not only with respect to angularity and surface texture, but also with respect to sphericity and flatness/elongation particle percentage, before and after the polishing and the degradation processes. Three natural aggregates (granite, gneiss and phonolite) collected from Brazilian quarries, and one by-product (steel slag) were evaluated. The findings from this study can be used to rank aggregates with respect to their shape properties. With the results obtained for the steel slag, it can be concluded that this material was the most resistant to polishing when compared with the natural aggregates.
This research evaluated recycled asphalt mixtures (RAMs) for application as wearing course in heavy traffic highways. The main objectives were to investigate the effect of different RAP contents and the effect of a recycling agent (RA) on the mechanical properties of RAMs. Recycled asphalt mixtures with low (10, 20 and 25%) and high (35, 50 and 65%) RAP contents were evaluated. Two of these mixtures (25 and 50% RAP content) were also evaluated after the addition of the RA. The results indicate that conditioning the RAP during the production of RAMs influences the RAP binder activation and the mechanical behaviour of the mixtures. RAMs with high RAP contents presented better resistance to permanent deformation and resulted in satisfactory resistance to fatigue cracking due to the activation of the RAP asphalt binder. Finally, the addition of the RA improved fatigue resistance for higher amounts of RAP without reducing rutting resistance.
17 April 2023 in International Journal of Pavement Research and Technology