Indoor location systems based on ultra-wideband (UWB) technology have become very popular in recent years following the introduction of a number of low-cost devices on the market capable of providing accurate distance measurements. Although promising, UWB devices also suffer from the classic problems found when working in indoor scenarios, especially when there is no a clear line-of-sight (LOS) between the emitter and the receiver, causing the estimation error to increase up to several meters. In this work, machine learning (ML) techniques are employed to analyze several sets of real UWB measurements, captured in different scenarios, to try to identify the measurements facing non-line-of-sight (NLOS) propagation condition. Additionally, an ulterior process is carried out to mitigate the deviation of these measurements from the actual distance value between the devices. The results show that ML techniques are suitable to identify NLOS propagation conditions and also to mitigate the error of the estimates when there is LOS between the emitter and the receiver.
9 November 2016 in IEEE Journal of Selected Topics in Signal Processing
One of the primary features of time-modulated arrays (TMAs) is their ability to adapt their harmonic patterns to exploit the angular diversity of multipath wireless channels. In such a case, the TMA excitations must provide an adequate level of harmonic windowing in order to safeguard both the antenna efficiency and the signal-to-noise ratio at reception. In this work, we propose to time-modulate the array excitations with periodic sum-of-weighted-cosine (SWC) pulses rather than with the periodic rectangular pulses corresponding to the on-off switches of conventional TMAs. We show that how the larger flexibility of the SWC pulses allows for a more versatile design of the TMA harmonic radiation patterns without penalizing the array gain for each exploited harmonic.
15 September 2016 in IEEE Journal of Selected Topics in Signal Processing
Diversity occurs whenever several copies of the same transmitted signal arrive at a receiver. Such a situation allows for improving the performance of a wireless communication system transmitting over a radio channel without increasing the transmit power. Previous works have shown that time-modulated arrays are capable of faithfully acquiring digital signals while exploiting angular diversity through the adaptive beamforming of their harmonic patterns. In this work, we take a step further and consider a wireless communication system employing digital linear modulated signals and an innovative receiver that includes a time-modulated array and a maximum ratio combining subsystem. The maximum ratio combiner is adapted to optimally exploit the multipath channel angular diversity. The performance of the system is analyzed in terms of two metrics: the signal-to-noise ratio and the symbol error rate. The results are compared to those achieved with other receivers that include conventional antenna arrays, exhibiting the time-modulated array solution a good tradeoff between performance and hardware complexity.
Time-modulated arrays (TMAs) are electromagnetic systems whose radiated power pattern is controlled by the application of variable-width periodical pulses to the individual elements. The nonlinear nature of the array operation causes the appearance of radiation patterns at the harmonic frequencies of such periodic pulses. The technique can be used for improving the side-lobe level (SLL) topology of the radiation pattern at the central frequency and/or to profitably exploit the harmonic patterns in order to supply smart antenna capabilities. Among the latter features, the TMA harmonic beamforming takes on special importance due to its attractive trade-off performance-hardware complexity. From this perspective, TMAs are sensors capable of transforming the spatial diversity of a communication channel into frequency diversity, thus improving the performance of a wireless communication. In addition to a walk through the origins of the concept, and a brief analysis of the mathematical fundamentals, this paper organizes the prolific state of the art of TMAs in two major thematic blocks: (1) TMA design from an antenna perspective; and (2) TMA design from a signal processing perspective.
In the world of Internet of Things (IoT), obtaining the physical location of devices has always been a task of great interest for developing increasingly complex location-based services (LBS). That is why in recent years wireless communication standards have been incorporating new additions focused on providing localization mechanisms to technologies widely used in the IoT world, such as Wi-Fi or Bluetooth. In particular, the IEEE 802.11-2016 Wi-Fi standard introduced ranging estimation between two devices through the so-called fine time measurement (FTM) protocol, defined by the IEEE 802.11mc. FTM is not yet widespread in the IoT field, but commercial modules capable of offering this functionality at a reasonable price are starting to appear. In early 2021, the most widespread system on a chip (SOC) family among IoT devices, the ESP32-XX series, added support for this Wi-Fi standard, enabling, for the first time, the use of a standard designed for location-based systems. This article analyzes the performance of this FTM implementation by carrying out and studying several measurement campaigns in different indoor and outdoor scenarios. Additionally, this work proposes an alternative real-time implementation for distance estimation inside the ESP32 using an approach based on machine learning. Such an implementation is successfully validated in a scenario totally different than those considered for the training and test sets. Finally, both the measurement sets and the developed software are available to the scientific community.