The limitations associated with the clinical use of autographs and allografts are driving efforts to develop relevant and applicable biomaterial substitutes. In this research, 3D porous scaffolds composed of bioactive glass (BG) obtained through the sol-gel technique and polylactic acid (PLA) synthesized via lactic acid (LA) ring-opening polymerization were prepared by the gel-pressing technique. Two different weight compositions were evaluated, namely, BG70-PLA30 and BG30-PLA70. The structure and morphology of the resulting scaffolds were analysed by FTIR, XRD, SEM, and under ASTM F1635 standard characterizations. The results confirmed that BG promotes the formation of a hydroxy-carbonated apatite (HAp) layer on composites when immersed in simulated body fluid (SBF). Biodegradability evaluations were carried out according to the ISO 10993-13:2010 standard. In addition, electrochemical evaluations were performed in both Hank’s and SBF solutions at 37 °C in order to analyse the degradation of the material. This evaluation allowed us to observe that both samples showed an activation mechanism in the early stages followed by pseudo-passivation due to physical bioactive glass characteristics, suggesting an improvement in the formation of the HAp nucleation. The described composites showed excellent resistance to degradation and outstanding suitability for bone tissue engineering applications.
12 December 2021 in Pädi Boletín Científico de Ciencias Básicas e Ingenierías del ICBI
La incorporación de materiales novedosos a la ingeniería de tejidos ha ayudado a resolver problemas específicos de regeneración ósea. El óxido de grafeno (GO), se ha utilizado como refuerzo mecánico en biomateriales con matrices cerámicas o poliméricas. En este trabajo se analiza el diseño y las propiedades mecánicas a compresión de andamios compuestos por Policaprolactona (PCL), Hidroxiapatita (HAP) y óxido de grafeno (GO), en una relación porcentual en peso de PCL (80)-HAP (20) /GO (0.1). El GO se obtuvo mediante el método de Hummers y la HAP se sintetizó por coprecipitación. Los andamios fueron sometidos a una deformación del 70% en la máquina de ensayos Univert® de la marca Cell Scale®. Una vez hechos los ensayos mecánicos, se analizan los datos para obtener las curvas esfuerzo-deformación. También se desarrolla un modelo mecánico a través del algoritmo de mínimos cuadrados de Levenberg-Marquardt en el software Comsol Multiphisics®, de donde se obtienen los parámetros del modelo que se ajustan al material diseñado.