0.5BaTiO3–(0.5 − x)BiMg1/2Ti1/2O3–xNaNbO3 (x = 0.10–0.30) ceramics were processed via a conventional solid state sintering route. X-ray diffraction analysis and Raman spectroscopy showed the formation of a cubic perovskite structure. Microstructural analysis of the samples revealed densely packed grains. The addition of NaNbO3 resulted in the enhancement in dielectric properties as a function of temperature. Relative permittivity decreased from 850 to 564 (at room temperature) with an increase in x; however, the stability in dielectric properties was improved with an increase in NaNbO3 concentration. At x = 0.25, relative permittivity (εr) was ~630 ± 15% in a temperature range of −70–220 °C with low dielectric loss (tan δ) < 0.025 (−57 to 350 °C) and high recoverable energy density ~0.55 J/cm3 which meet the criterion for X9R MLCC applications.
Different processing conditions and the effect of secondary phases on ferroelectric properties of Bi0.5(Na0.8K0.2)0.5TiO3(BNKT) are studied. Ceramic powders are prepared by solid state reaction and different sintering temperatures (temperatures between 1075 and 1150°C) are analyzed. Finally, samples are characterized by X-ray diffraction, Raman microspectroscopy, Scanning Electron Microscopy, impedance spectroscopy, and density measurements. Through XRD patterns, the perovskite structure is stabilized; together with small peaks corresponding to a secondary phase associated with K2-xNaxTi6O13phase. Moreover, the content of the secondary phase, d33piezoelectric constant and dielectric properties increase with sintering temperature.