Due to the great achievements in the field of optimization of the design of cyclone separators, non-standard solutions are sought to increase their performance. Therefore, in this study, we consider the impact of different cone and cylinder height variants on the performance of cyclone separators. Additionally, we propose non-standard shapes for these sections. Three different heights: H/D = 0.5, 1.0, and 1.5, with D (the main cyclone body diameter), are analyzed. Since the cone is one of the most important geometrical entities, three different shapes viz. a straight (conventional) profile, a concave profile as well as a convex profile are also taken into account. Cyclone performance is rated at three different inlet velocities viz. Uin = 10 m/s, 15 m/s, and 20 m/s. Hence, a total of 27 simulations have been performed using the Reynolds stress model. It becomes apparent from the present study that the pressure loss is lowest in the convex variant, whereas the separation efficiency is better in the conventional design. Furthermore, an increase in the length of the cylindrical section reduces pressure drop with a mild decrease in the collection efficiency in all variants.
Energy conservation in brick production is crucial to achieving net-zero carbon emissions from the building sector, especially in countries with major expansions in the built environment. However, widely disparate energy consumption estimates impede benchmarking its importance relative to the steel and cement industries. Here we modelled Indian brick production and its regional energy consumption by combining a nationwide questionnaire survey on feedstock, process variables and practices with remote sensing data on kiln enumeration. We found a large underreporting in current official estimates of energy consumption, with actual energy consumption comparable to that in the steel and cement industries in the country. With a total estimated production of 233 ± 15 billion bricks per year, the brick industry consumes 990 ± 125 PJ yr−1 of energy, 35 ± 6 Mt yr−1 coal and 25 ± 6 Mt yr−1 biomass. The main drivers of energy consumption for brick production are the kiln technology, the production capacity and the fuel mix used. The results suggest that improving operating practices would be a first step in making brick production more energy efficient.
23 September 2016 in Water Quality Research Journal
Sequencing batch reactor (SBR) was assessed for direct co-treatment of old landfill leachate and municipal wastewater for chemical oxygen demand (COD), nutrients and turbidity removal. Nitrogen removal was achieved by sequential nitrification and denitrification under post-anoxic conditions. Initially, SBR operating conditions were optimized by varying hydraulic retention time (HRT) at 20% (v/v) landfill leachate concentration, and results showed that 6 d HRT was suitable for co-treatment. SBR performance was assessed in terms of COD, ammonia, nitrate, phosphate, and turbidity removal efficiency. pH, mixed liquor suspended solids, mixed liquor volatile suspended solids (MLVSS), and sludge volume index were monitored to evaluate stability of SBR. MLVSS indicated that biomass was able to grow even at higher concentrations of old landfill leachate. Ammonia and nitrate removal efficiency was more than 93% and 83%, respectively, whereas COD reduction was in the range of 60–70%. Phosphate and turbidity removal efficiency was 80% and 83%, respectively. Microbial growth kinetic parameters indicated that there was no inhibition of biomass growth up to 20% landfill leachate. The results highlighted that SBR can be used as an initial step for direct co-treatment of landfill leachate and municipal wastewater.