A computer vision technique was used to determine the volume of raw agricultural products with an irregular shape. Thirty images of each rotated raw roma tomato, salad tomato, white button mushroom, and strawberry were collected. Volume determinations of these products using the optical imaging system were compared to volume measurements collected using a water displacement/buoyant force method. A high correlation was found between measurements from both methods. Furthermore, regression analyses of weight and volume measurements of each product set were used to develop equations to predict object volume from object weight. Weight measurement of raw produce can be used as a non-destructive method to estimate unit volume for sorting and grading purposes.
1 December 2002 in Journal of Applied Poultry Research
Raw chicken is a significant source of the bacterial pathogen Campylobacter. The commercial processing of poultry for consumption presents many opportunities in which carcasses and other raw products can become newly contaminated or cross-contaminated with this microorganism. Increased use of chlorine and higher volumes of water during processing may not be effective for reducing Campylobacter populations. This study examined the efficacy of 10% trisodium phosphate (TSP), 0.1% acidified sodium chlorite (ASC), 0.1 and 0.5% cetylpyridinium chloride (CPC), 1% Tween 80, and water (50°C at application) for their ability to inactivate, reverse the attachment of, or inhibit the attachment of Campylobacter jejuni applied to chicken breast skin. Statistically significant (P ≤ 0.05) differences in the reduction of C. jejuni populations were observed across chemical treatments and contact times (30 s, 3 min, or 10 min). When bacteria were applied before treatment, a reduction of >1.0 log10 cfu/skin was achieved with 0.5% CPC (2.89), 10% TSP (1.63), 0.1% ASC (1.52), and 0.1% CPC (1.42). When bacteria were applied after chemical treatment, a reduction of >1.0 log10 cfu/skin was achieved with 0.5% CPC (4.67) and 10% TSP (1.28). The commercial use of an effective antimicrobial chemical spray may help to reduce the level of Campylobacter on raw poultry carcasses and reduce the volume of rinse water applied for carcass washing.
Listeria monocytogenes is a foodborne pathogen that represents a high risk for consumers because it can grow under refrigeration conditions and can also develop acid tolerance. Fresh blueberries are hand-picked, packed, and transported under refrigeration without receiving a microbial inactivation treatment. The aim of this work was to study the survival of L. monocytogenes in fresh highbush blueberries stored at 4 or 12 °C under different controlled atmosphere conditions, including air (control); 5% O2, 15% CO2, 80% N2 (controlled atmosphere storage [CAS]); or ozone gas (O3), 4 ppm at 4 °C or 2.5 ppm at 12 °C, at high relative humidity (90 to 95%) for a total of 10 days. Fresh blueberries inside a plastic clamshell were spot inoculated with the bacteria and were stored at 4 or 12 °C in isolated cabinets under air, CAS, and O3 atmospheric conditions. Samples were evaluated on days 0, 1, 4, 7, and 10 for microbial growth using modified Oxford agar. CAS did not delay or inhibit L. monocytogenes growth in fresh blueberries after 10 days. O3 achieved 3- and 2-log reductions when compared with air treatment at 4 and 12 °C, respectively. Low concentrations of O3 together with proper refrigeration temperature can ensure product safety throughout transportation. O3 is a strong antimicrobial that safely decomposes to oxygen and water without leaving residues and can be used as an alternative method to prevent bacterial growth during a long transport period.
Dynamics of a bubble impacting and sliding on a tilted surface has been investigated through experimental and computational methods. In experiments, bubble-wall interaction has been characterized with an air bubble of about 550 in radius and a rising speed of about 30 cm/s as it impacts a solid substrate of a wall angle between and . Specifically, shear stress generated on the wall has been calculated and compared with bacterium adhesion force in order to evaluate a potential sanitization function. We numerically solved a force balance including buoyancy, hydrodynamic inertia and drag, and lift and thin film force to determine the bubble motion. Results showed that the shear stress increases with the wall inclination. The maximum shear stress goes up to more than 300 Pa as a single bubble impacts and scrubs a tilted wall. We found that such a high shear stress is attributed to a rapid change in thin film curvature (flipping bubble-water interface) during the bouncing stage. Later, during the sliding stage, a smaller shear stress up to around 45 Pa is generated for a longer period. We also showed that the shear stress generated during the bouncing and sliding stages is high enough to remove bacteria from a surface as a potential method for removing bacteria from tilted surfaces.
A multiyear survey of 31 ready-to-eat (RTE) food processing plants in the United States was conducted to determine the incidence of Listeria spp. in various RTE production environments. Samples were collected from 22 RTE plants regulated by the U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) and from 9 RTE food plants regulated by the U.S. Department of Health and Human Services' Food and Drug Administration (FDA). Only nonfood contact surfaces in the RTE manufacturing areas with exposed RTE product were sampled. Each sample was individually analyzed for the presence of Listeria spp. by using a PCR-based rapid assay. In total, 4,829 samples were collected from various locations, including freezers, equipment framework, floors, walls, wall-floor junctures, drains, floor mats, doors, and cleaning tools. Nine (29%) of the facilities had zero samples positive for Listeria spp. in the production environment, whereas 22 (71%) had one or more samples positive for Listeria spp. The total incidence of Listeria spp. in all RTE food plants was 4.5%. The positive rate in plants regulated by the FSIS ranged from 0 to 9.7%, whereas the positive rate in plants regulated by the FDA ranged from 1.2 to 36%.