Research on additives that improve the quality of silages for an enhanced and sustainable biogas production are limited in the literature. Frequently used additives such as lactic acid bacteria enhance the quality of silages but have no significant effect on biogas yield. This study investigated the effect of a new enzymatic additive on the quality of ensiling and BMP of sugar beet leaves. Sugar beet leaves were ensiled with and without the additive (Aspergillus- and Neurospora-based additive) in ratios of 50:1 (A50:1), 150:1 (B150:1), and 500:1 (C500:1) (gsubstrate/gadditive) for 370 days at ambient temperature. Results showed that silages with additive had lower yeast activity and increased biodegradability compared to silages without additive (control). The additive increased the BMP by 45.35%, 24.23%, and 21.69% in silages A50:1, B150:1, and C500:1 respectively, compared to silages without additive (control). Although the novel enzyme is in its early stage, the results indicate that it has a potential for practical application at an additive to substrate ratio (g/g) of 1:50. The use of sugar beet leaves and the novel enzyme for biogas production forms part of the circular economy since it involves the use of wastes for clean energy production.
The quality of silages could deteriorate during feed-out to biogas reactors. Using airtight silos where silages in pulp form can be pumped directly into a reactor may mitigate this problem. In this study, sugar beet leaves were ensiled in vertical columns and in airtight bags at ambient temperature for 370 days. Homofermentative lactic acid bacteria were added to some of the samples in the airtight bags to test the effect on silage quality and biomethane potential (BMP). Quality of ensiling and BMP were studied across the height of the columns. With the exception of the silages at the top of the columns, lactic acid represented over 55% of the concentration of total fermentation products in the silages. The silages at the bottom of the columns had a 20.9% higher BMP than the silages at the top, indicating that the BMP increases with the column depth. The BMP of the silage with additive in the airtight bags was 8% higher than that of the silage without additive. Four kinetic models were used to fit the experimental BMP, out of which the one-step two-fraction kinetic model described the experimental BMP better than other models.