Industrial biotechnology is a continuously expanding field focused on the application of microorganisms to produce chemicals using renewable sources as substrates. Currently, an increasing interest in new versatile processes, able to utilize a variety of substrates to obtain diverse products, can be observed. A robust microbial strain is critical in the creation of such processes. Lactic acid bacteria (LAB) are used to produce a wide variety of chemicals with high commercial interest. Lactic acid (LA) is the most predominant industrial product obtained from LAB fermentations, and its production is forecasted to rise as the result of the increasing demand of polylactic acid. Hence, the creation of new ways to revalorize LA production processes is of high interest and could further enhance its economic value. Therefore, this review explores some co-products of LA fermentations, derived from LAB, with special focus on bacteriocins, lipoteichoic acid, and probiotics. Finally, a multi-product process involving LA and the other compounds of interest is proposed.
The production of lactic acid (LA) through the microbial conversion of agro-industrial residuals is an important process in the biotechnology industry. The growth kinetics of 30 strains of lactic acid bacteria (LAB) isolated from agro-industrial residues were determined and nine strains were selected for microbioreactor fermentation. Lactiplantibacillus pentosus_70-1 (1.662) and L. pentosus_19-2 (1.563) showed the highest OD600 values, whereas the highest growth rates were observed for L. pentosus_19-2 (0.267 h−1) and Weissella soli_31 (0.256 h−1). The production of LA and acetic acid (AA), glucose consumption, and metabolic profiles were determined, without finding significant differences in the production of LA; however, W. soli_29 produced the highest amount of LA (20.833 gL−1) and was able to metabolize most of the studied carbohydrates. Based on these results, W. soli_29 was chosen for a 20 h fermentation in a 7 L bioreactor using both standard medium and milk whey supplemented medium. W. soli_29 produced 16.27 gL−1 and 7.21 gL−1 of LA in each of these mediums, respectively. These results show the underlying potential of Weissella strains for biotechnological applications. Additional analysis which should contemplate different agro-industrial residues and other conditions in bioreactors must be carried out.
Introducción: La agricultura moderna busca mejorar la sostenibilidad y reducir el impacto ambiental, al mismo tiempo que busca satisfacer las necesidades alimenticias de la las generaciones actuales y futuras. Una estrategia prometedora es el uso de bioestimulantes microbianos para incrementar los rendimientos de los cultivos y disminuir la dependencia de agroquímicos y fertilizantes. Dentro de estos bioestimulantes sobresalen los que utilizan microorganismos benéficos como las bacterias promotoras del crecimiento en plantas. Este estudio lo enfocamos en aislar e identificar bacterias ácido-lácticas presentes en bioles de fabricación artesanal, y caracterizarlas por su capacidad para producir compuestos indólicos. Los hallazgos sugieren que algunas bacterias ácido-lácticas presentes en las dos muestras de bioles pueden actuar como productoras de compuestos indólicos, como el ácido 3-indolacético, lo que las convierte en una alternativa prometedora para prácticas agrícolas más sostenibles y respetuosas con el ambiente. Objetivo: Aislar, e identificar bacterias ácido-lácticas presentes en dos muestras de bioles de fabricación artesanal, y caracterizarlas por su crecimiento y su capacidad para producir compuestos indólicos. Métodos: Utilizamos técnicas moleculares como el análisis del gen 16S rRNA y un análisis de secuenciación de tipificación multilocus para identificar las cepas de bacterias ácido-lácticas presentes en bioles de fabricación artesanal. Posteriormente, caracterizamos las cepas aisladas mediante cinéticas de crecimiento y pruebas colorimétricas para la detección de compuestos indólicos, y la cuantificación de dichos compuestos mediante cromatografía líquida de alta eficiencia (HPLC). Resultados: Identificamos tres géneros distintos de especies de bacterias ácido-lácticas los cuales fueron Lacticaseibacillus paracasei, Lactiplantibacillus sp., y Lacticaseibacillus pantheris. Destacaron por su capacidad para producir ácido 3-indolacético las especies Lactiplantibacillus sp. (M2) y Lacticaseibacillus paracasei (M4) con una concentración de 16,75µg/mL y 4,57µg/mL, respectivamente. Conclusión: Nuestros resultados sugieren que algunas de las bacterias ácido-lácticas presentes en los bioles de fabricación artesanal pueden actuar como productoras de compuesto indólicos como ácido 3-indolacético e indol, lo que las convierte en una alternativa prometedora para prácticas agrícolas más sostenibles y respetuosas con el ambiente.
Steam sterilization is a technique widely implemented in different biotechnological processes, among them the growth of microorganisms in bioreactors, which require initial aseptic conditions. In the present paper, it was studied the relationship between the lethality and the death rate of Bacillus cereus grown in 7 liter jacked stirred tank bioreactors was examined, where sugar cane molasses was utilized as the main culture medium. The sterilization process was tested with an industrial autoclave within data loggers in bioreactors, which measure the temperature in the cold point to quantify the accumulated lethality. Through data analysis a contour plot allows a graphical prediction of the microbiological sterilization results in terms of colony forming units (CFU). The case study shows that there is range between 16 and 20 minutes, approaching 123 °C, with a null presence of contaminant microorganisms. The surface chart demonstrates the existing non-linear relationship between the variables temperature and time involved. A positive correlation was observed using Ratkowsky mathematical model with a 0,971 correlation coefficient and the estimated value of α = 11,04 and β = -1,49 for the non-lineal model of parameterization. With these results, it is possible to predict the CFU based on data. This could provide an interesting base for future sterilization practices and a methodology as a starting point for sterilization trials in industry and save time and costs.