Selective laser melting (SLM) can be used to manufacture complex parts, however, it is difficult to make large parts due to the size limitation of the SLM equipment. In application, smaller selective laser-melted (SLMed) Ti-6Al-4V (TC4) parts can be brazed or welded to form larger components. In the brazing, AgCuTi is often used to braze TC4. However, the wettability of AgCuTi on the SLMed TC4 should be evaluated before joining the SLMed TC4 parts. As a result, wetting and spreading tests and brazing experiments should be undertaken to successfully join the SLMed TC4 parts. In this study, a LINKAM TS 1500 high-temperature hot stage was used to test the brazability of the AgCuTi on the surface of SLMed TC4. Different temperatures and dwell times were used: (i) 850 °C 900 °C and 950 °C, holding for 120 s, were used to study the temperature effects; (ii) 20 s, 120 s and 200 s were used at 850 °C to study the dwell time effects. The R~t model was used to describe the wetting and spreading process. The results of this study can provide basic data for the joining of SLMed TC4 in industry.
The wetting kinetics of nickel-based filler metal (BNi2) over selective laser-melted Ti-6Al-4V (SLMed TC4) titanium alloy in a protective argon atmosphere is experimentally investigated using a real-time in situ hot stage equipped with an optical microscope. The spreading processes at different temperatures are similar, and the overall wetting/spreading process can be roughly divided into three stages: (i) an initial stage, (ii) a rapid spreading stage, and (iii) an asymptotic stage. Moreover, the wetting kinetics of the BNi2/SLMed TC4 system can be expressed by empirical power exponential function Rn~t with n = ~1. In the process of spreading, Ti-based solid solution (Ti(ss)) and intermetallic compound (Ti2Ni and TiB2) were formed at the interface within the reaction domain, and the phase transition of α’ martensitic to α-Ti and β-Ti also took place. The influence of elevated temperature on the spreading and wetting kinetics of the BNi2/SLMed TC4 system was studied, and the results show that the increase of temperature has a slightly promoting effect on the spreading, but a limited impact on the value of n. In addition, the spreading and wetting kinetics of BNi2/SLMed TC4 system are similar to those of BNi2 on conventional forged TC4 substrate.