This paper addresses challenges in the application of existing colters in Chinese ecological tea plantations due to abundant straw roots and insufficient tillage depth. Aligned with the agronomic requirements of hilly eco-tea plantations, our study optimizes the structural advantages of the joint use of rotary tillage blades and double-disc colters to design an efficient trenching device. Our investigation explores the motion characteristics of a double-disc colter during deep trenching operations, in conjunction with rotary tillage blades. Employing discrete element method (DEM) simulations, this paper aims to minimize the working resistance and enhance the tillage depth stability. Single-factor experiments are conducted to determine the impact of key structural parameters on the tillage depth stability and working resistance. The optimal parameters are determined as a relative height of 80 mm to 120 mm, a 280 mm to 320 mm diameter for the double-disc colter, and a 10° to 14° angle between the two discs. The central composite design method is used to optimize the structural parameters of the double-disc colter. The results indicate that when the relative height is 82 mm, the diameter of the double-disc colter is 297 mm, and the angle between the two discs is 14°, the tillage depth stability performance reaches 91.64%. With a working resistance of merely 93.93 N, the trenching device achieves optimal operational performance under these conditions. Field validation testing shows a tillage depth stability coefficient of 92.37% and a working resistance of 104.2 N. These values deviate by 0.73% and 10.93%, respectively, from the simulation results, confirming the reliability of the simulation model. A field validation test further confirms that the operational performance of the colter aligns with the agronomic requirements of ecological tea plantations, offering valuable insights for research on trenching devices in such environments.

An optimized tumbling process can significantly improve the oxygen dissolving capacity of composting and fertilizer quality: by increasing the fluffiness of the lower layer of the pile, localized anaerobic fermentation can be avoided, thereby enhancing compost quality. This paper presents a method for improving the oxygen dissolving capacity of rotary drum food waste composting through a combination of simulation optimization and experimental validation. First, the discrete element method was used to optimize the key parameters of the tumbling process. The response surface method was then employed to analyze the composting test results and determine the optimal conditions. To ensure the reliability of the equipment under this method, failure risk analysis was conducted using the finite element method. The simulation optimization results showed that with a rotary drum reactor speed of 3.5 r/min, a horizontal angle of inclination of 2.5°, a mixing blade angle of inclination of 43°, and a blade pitch of 580 mm, the fluffiness of the lower layer of the pile increased by 8.515%, achieving the best tumbling and indirectly enhancing oxygen dissolving capacity. The maximum deformation of the load-bearing components was only 0.0548 mm, and the minimum safety factor was 4.408 (≥1 is considered safe). A 14-day composting experiment was conducted to validate the optimized parameters. The results showed that the maximum temperature of the compost pile reached 68.34 °C (lasting 7 days), with the pH, moisture content, C/N ratio, humus substances, humic acid, and fulvic acid contents of the fertilizer all meeting or exceeding the levels recommended by Chinese national standards. These findings indicate that the optimized tumbling device effectively improved the stability and dissolved oxygen efficiency of food waste composting, providing valuable practical insights and a research foundation for enhancing oxygen efficiency in the composting of other organic wastes.

Aiming at the problems of high labor intensity and low efficiency in manual operation during the pulping process of rice seedling nursing in thin mud in hilly and mountain areas, this paper designed a new type of paddy field blade for seedling nursing, and utilized a rice nursery pulper to help manual operation complete the pulping process. It created a mathematical model of mud-throwing mass and operating power in the operation process of paddy field blade, and obtained the main structure factors that influenced the mud-throwing mass and operating power of paddy field blade, which included the area of mud splashing board, the angle between the front cutting edge and the mud splashing board, and the inclination angle between the front cutting surface and the mud splashing board. To further analyze the degree of influence of the blade’s main structure parameters on mud-throwing mass and operating power, it used EDEM discrete element simulation software to establish a discrete element simulation model of paddy field blade and mud particle system, performed simulation analysis with the method of orthogonal experimental design, and conducted a bench test for comparison. The results showed that: (1) the degree of influence of the three structure parameters on mud-throwing mass and operating power from large to small in order was the area of mud splashing board > the inclination angle between front cutting surface and mud splashing board > the angle between front cutting edge and mud splashing board; (2) the maximum relative error for mud-throwing mass between simulation analysis and bench test was 4.53%, and that for operating power was 8.67%; and (3) three reference parameters combinations were selected by P₂-1/M₂ graph, the mud-throwing mass of the three combinations was 40.43%, 27.52% and 0.16% higher than that of the original blade, and the power consumed was 13.99%, 21.83% and 36.65% lower than that of the original blade, indicating that the new paddy field blade had good operating performance.

The operation of electric rice reaper binders in hilly and mountainous areas currently faces the challenges of poor conveying efficiency and high harvest losses caused by the large dispersion of rice stem posture angles. In this study, we propose a multiparameter collaborative optimization method for improving header structure in an effort to address these challenges. First, key parameters influencing lifting performance and their operational ranges were determined based on a theoretical analysis of the stem-lifting mechanism’s kinematic characteristics. A dynamic model simulating the header’s lifting process was developed by using the ADAMS multibody dynamics platform. Subsequently, we designed a quadratic regression orthogonal rotation combination experiment with three factors, i.e., the stem-lifting speed ratio coefficient, the cutter installation position, and the header tilt angle, using the stem-lifting angle as the evaluation metric. The variance in the experimental data was analyzed with Design-Expert 13.0, and response surface methodology (RSM) was applied to elucidate the parameter interaction effects. The optimal parameter combination was identified as a speed ratio coefficient of 2.14, a cutter installation position of 258.79 mm, and a header tilt angle of 62.63°, yielding a theoretical stem-lifting angle of 2.36°. Field validation tests demonstrated an actual stem-lifting angle of 2.44° (relative error: 3.39%) and a header loss rate of 0.59%, representing a 49.6% reduction compared with the pre-optimized design. These results confirm that the optimized header satisfies operational requirements for hilly terrain rice harvesting, providing both theoretical guidance and technical advancements for the design of low-loss harvesting machinery.