Cellulose nanofibers (CNFs) with an average diameter of 22 nm were prepared from sugar beet pulp (SBP) via an environmentally-friendly method. Steam-explosion pretreated SBP was treated with hydrogen peroxide (H2O2) bleaching, high-speed blending, and ultrasonic treatment. Thermogravimetric analysis showed that hemicellulose was partially hydrolyzed in the steam-cooking stage, pectin was removed in the explosion stage, and lignin was removed by H2O2 bleaching. The removal of non-cellulosic components was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. Morphological analysis showed that steam-explosion pretreatment largely extracted the binder materials of hemicellulose and pectin. This exposed the microfibrillated cellulosic fibers, which promoted subsequent nanofibrillation. X-ray diffraction showed that the CNFs had a crystallinity index of 62.3%. The CNFs had good thermal stability, and thus have potential for use as fillers in polymer matrices. The only chemical reagent used in this green method was H2O2. Combining H2O2 bleaching with steam explosion, high-speed blending, and ultrasonic treatment reduced the overall energy consumption and increased the efficiency of the CNFs extraction. The method, therefore, has potential application in industrial processes.
In this work, design and development of a new melt mixing method and corresponding mixer for polymer materials were reported. Effects of ultrasonic power and sonication time on the carbon nanotubes (CNTs) filled ultra high molecular weight polyethylene (UHMWPE) nanocomposites were experimentally studied. Transmission Electron Microscopy images showed that homogeneous dispersion of CNTs in intractable UHMWPE matrix is successfully realized due to the synergetic effect of ultrasonic wave and extensional deformation without any aid of other additives or solvents. Differential scanning calorimetry results revealed an increase in crystallinity and crystallization rate due to the finer dispersion of the CNTs in the matrix which act as nucleating point. Composites' complex viscosity and storage modulus decreased sharply at first and then leveled off with the increase of sonication time or the ultrasonic power. The thermal stability and the tensile strength of the CNTs/UHMWPE nanocomposites improved by using this novel mixing method. This is the first method that combined the ultrasonic wave and the extensional deformation in which the elongation rate, sonication time and ultrasonic power can be adjusted simultaneously during mixing. The novel mixer offers several advantages such as environment-friendly, high mixing efficiency, self-cleaning and wide adaptability to materials.
Cellulose nanofibers (CNFs) with an average diameter 8 nm were isolated from corncobs using a stepwise method that included steam-explosion pretreatment, alkaline treatment, sodium hypochlorite bleaching, high-speed blending, and ultrasonic treatment. This mechanochemical method used only two chemical reagents in low concentrations to remove non-cellulosic components. The removal of non-cellulosic components was confirmed by Fourier-transform infrared spectroscopy. X-ray diffraction revealed an increase in crystallinity during steam explosion and subsequent mechanochemical treatments. Pretreatment by steam explosion caused the partial hydrolysis of hemicellulose and loosened the structure of raw materials, which facilitated the subsequent chemical processes. The thermal stability and morphology of samples at different stages were also investigated. Steam explosion increased the thermal stability of hemicellulose and cellulose components, as it removed a fraction of hemicellulose. High-speed blending reduced the entanglement of cellulosic fibers and created uniform size. Ultrasonic treatment was used in the final step of nanoscale fibrillation. The method used in this study is environmentally friendly and has the potential to be applied at industrial scale.
About Me
Polymer processing, process simulation, equipment optimization.
Polymer processing, process simulation, equipment optimization.