This paper introduces a CMOS operational amplifier with rail-to-rail input and output voltage ranges, suitable for operation in extremely low-voltage environments. The approach is based on a bulk-driven input stage with extended input common-mode voltage range, in which the effective input transconductance is enhanced by means of a partial positive feedback loop. As a result, a gain and gain-bandwidth product performance similar to that of an amplifier using a gate-driven approach is obtained. Output rail-to-rail operation is achieved by means of a push-pull stage, which is biased in class-AB by using a static feedback loop, thus avoiding frequency limitations inherent in dynamic-feedback tuning schemes. The proposed two-stage operational amplifier was designed to operate with a 1-V supply, and a test chip prototype was fabricated in 0.35-mum standard CMOS technology. The experimental performance features an open-loop DC gain higher than 76 dB and a closed-loop unity-gain bandwidth above 8 MHz when a 1-MOmegapar17-pF load is connected to the amplifier output.

This brief presents an ultra-low power low-dropout (LDO) regulator with an experimental total quiescent current consumption of only 3.08 nA. The circuit is designed to operate with a load current in the range 0 - 11 mA. A novel adaptive biasing scheme based on a super source follower (SSF) structure is proposed, which measures the absolute voltage difference between the two inputs of the LDO’s error amplifier and modifies the biasing current accordingly. Thus, the transient response of the regulator is improved by counteracting the effect of using such a low bias current. The proposed LDO has been fabricated in a standard CMOS 180 nm process and the experimental characterization showed an outstanding performance in terms of maximum load current over quiescent current consumption ratio.

A capacitor-less (CL) low-dropout (LDO) regulator suitable to be incorporated in an on-chip system with low-voltage micro-energy-harvested supply, is proposed in this contribution. The differential input stage of the error amplifier includes bulk-driven MOS transistors, thus providing the LDO with an output voltage range that extends from the negative rail up to a level very close to the input voltage without the need of using a resistive feedback network. The circuit parameters relying on the feedback factor, $\beta $ , are maximized thanks to the use of a unitary value for this parameter. The CL-LDO has been designed and fabricated in standard 180-nm CMOS technology and optimized to operate with an input voltage equal to 0.6 V and a reference level of 0.5 V. The experimental characterization of the fabricated prototypes shows that, under these operating conditions, the LDO is able to deliver a load current above 0.75 mA with a total quiescent current of only 7.0 nA. Furthermore, the proposed voltage regulator is able to operate from input voltages as low as 0.4 V, delivering in this case a maximum load current of 30 $\mu \text{A}$ .