John Paul Morrissey

Dr. John Paul Morrissey

University of Edinburgh
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 May 2014 in Granular Matter
Verified
Journal Article
Open access
PDF file
STSubhash C. Thakur
Subhash C. Thakur
JMJohn Paul Morrissey
John Paul Morrissey
JSJin Sun
Jin Sun
JCJian-Fei Chen
Jian-Fei Chen
JOJin Y. Ooi
Jin Y. Ooi
An adhesive elasto-plastic contact model for the discrete element method with three dimensional non-spherical particles is proposed and investigated to achieve quantitative prediction of cohesive powder flowability. Simulations have been performed for uniaxial consolidation followed by unconfined compression to failure using this model. The model has been shown to be capable of predicting the experimental flow function (unconfined compressive strength vs. the prior consolidation stress) for a limestone powder which has been selected as a reference solid in the Europe wide PARDEM research network. Contact plasticity in the model is shown to affect the flowability significantly and is thus essential for producing satisfactory computations of the behaviour of a cohesive granular material. The model predicts a linear relationship between a normalized unconfined compressive strength and the product of coordination number and solid fraction. This linear relationship is in line with the Rumpf model for the tensile strength of particulate agglomerate. Even when the contact adhesion is forced to remain constant, the increasing unconfined strength arising from stress consolidation is still predicted, which has its origin in the contact plasticity leading to microstructural evolution of the coordination number. The filled porosity is predicted to increase as the contact adhesion increases. Under confined compression, the porosity reduces more gradually for the load-dependent adhesion compared to constant adhesion. It was found that the contribution of adhesive force to the limiting friction has a significant effect on the bulk unconfined strength. The results provide new insights and propose a micromechanical based measure for characterising the strength and flowability of cohesive granular materials.

1 September 2015 in Construction and Building Materials
Verified
Journal Article
Open access
RBR. De Bold
R. De Bold
GOG. O’cOnnor
G. O’cOnnor
JMJohn Paul Morrissey
John Paul Morrissey
MFM.C. Forde
M.C. Forde

1 September 2021 in International Journal of Pharmaceutics
Verified
Journal Article
Closed access
LWLi Ge Wang
Li Ge Wang
JMJohn Paul Morrissey
John Paul Morrissey
DBDana Barrasso
Dana Barrasso
DSDavid Slade
David Slade
SCSean Clifford
Sean Clifford
JLJames D. Litster
James D. Litster

20 May 2022 in Granular Matter
Verified
Journal Article
Open access
PDF file
Xizhong ChenXizhong Chen
Xizhong Chen
LWLi Ge Wang
Li Ge Wang
JMJohn Paul Morrissey
John Paul Morrissey
JOJin Y. Ooi
Jin Y. Ooi
Attrition and breakage of agglomerates are prevalent during production and handling processes in many industries. Therefore, it is highly desirable to be able to model and analyse the agglomerate breakage process under various loading conditions. The ensemble strength and breakage patterns of agglomerates are still not well understood despite a significant amount of research being carried out. In this study, three-dimensional discrete element method (DEM) simulation of the impact breakage behaviour of agglomerates were performed using a Timoshenko beam bond model which considers axial, shear, twisting and bending behaviours on the bonds. An advantage of the Timoshenko beam bond model is the pertinent parameters of the bond contact have clear physical meaning and therefore could be determined through corresponding experimental characterisations. The mechanical properties of the bonds in this study were firstly calibrated using experimental measurements. The validation of the Timoshenko beam bond model was then undertaken by direct comparisons between the numerical simulation and experimental results of impact tests. It was shown that the time evolution of the agglomerate breakage process obtained from simulation had good agreement with experimental observations. Numerical results indicate that most of the damage happens at the early stage of the impact and a cone shape fracture zone is formed quickly inside the agglomerate where strong compressive stresses are concentrated. It is found that the exterior of the fracture zone is surrounded by an arch shape tensile stress which dominates the fracture propagation.

12 December 2021 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
JMJohn Paul Morrissey
John Paul Morrissey
KHKevin J. Hanley
Kevin J. Hanley
JOJin Y. Ooi
Jin Y. Ooi
Discrete Element Method (DEM) simulations have the potential to provide particle-scale understanding of twin-screw granulators. This is difficult to obtain experimentally because of the closed, tightly confined geometry. An essential prerequisite for successful DEM modelling of a twin-screw granulator is making the simulations tractable, i.e., reducing the significant computational cost while retaining the key physics. Four methods are evaluated in this paper to achieve this goal: (i) develop reduced-scale periodic simulations to reduce the number of particles; (ii) further reduce this number by scaling particle sizes appropriately; (iii) adopt an adhesive, elasto-plastic contact model to capture the effect of the liquid binder rather than fluid coupling; (iv) identify the subset of model parameters that are influential for calibration. All DEM simulations considered a GEA ConsiGma™ 1 twin-screw granulator with a 60° rearward configuration for kneading elements. Periodic simulations yielded similar results to a full-scale simulation at significantly reduced computational cost. If the level of cohesion in the contact model is calibrated using laboratory testing, valid results can be obtained without fluid coupling. Friction between granules and the internal surfaces of the granulator is a very influential parameter because the response of this system is dominated by interactions with the geometry.

5 May 2020 in SIMULATION
Verified
Journal Article
Open access
PDF file
JMJohn Paul Morrissey
John Paul Morrissey
PTPrabhat Totoo
Prabhat Totoo
KHKevin J. Hanley
Kevin J. Hanley
SPStefanos-Aldo Papanicolopulos
Stefanos-Aldo Papanicolopulos
JOJin Y. Ooi
Jin Y. Ooi
TGThomas Gierlinger
Thomas Gierlinger
Regardless of its origin, in the near future the challenge will not be how to generate data, but rather how to manage big and highly distributed data to make it more easily handled and more accessible by users on their personal devices. VELaSSCo (Visualization for Extremely Large-Scale Scientific Computing) is a platform developed to provide new visual analysis methods for large-scale simulations serving the petabyte era. The platform adopts Big Data tools/architectures to enable in-situ processing for analytics of engineering and scientific data and hardware-accelerated interactive visualization. In large-scale simulations, the domain is partitioned across several thousand nodes, and the data (mesh and results) are stored on those nodes in a distributed manner. The VELaSSCo platform accesses this distributed information, processes the raw data, and returns the results to the users for local visualization by their specific visualization clients and tools. The global goal of VELaSSCo is to provide Big Data tools for the engineering and scientific community, in order to better manipulate simulations with billions of distributed records. The ability to easily handle large amounts of data will also enable larger, higher resolution simulations, which will allow the scientific and engineering communities to garner new knowledge from simulations previously considered too large to handle. This paper shows, by means of selected Discrete Element Method (DEM) simulation use cases, that the VELaSSCo platform facilitates distributed post-processing and visualization of large engineering datasets.