This article introduces a new mathematical model that predicts the pressure drop in a tangential inlet cyclone. The model calculates the pressure drop from the frictional losses in the cyclone body, using a wall friction coefficient based on the surface roughness and Reynolds number. The entrance and exit losses are also included in the model by defining new geometrical parameters. The pressure drop coefficient is obtained as a function of cyclone dimensions and operating conditions. The model is validated by studying 12 different cyclones presented in the literature. Comparison of the model results with predictions and measurements published in the literature show that the new model predicts the experimental results quite well for a wide range of operating conditions covering a flow rate of 0.3–220 l/s and a temperature range of 293–1200°K, in different cyclones. The pressure drop coefficient is also examined in view of the outlet pipe diameter, friction coefficient, surface roughness, and Reynolds number.
This study is carried out to investigate the effects of surface roughness on the flow field and cyclone performance. The flow inside the cyclone separator is modeled as a three-dimensional turbulent continuous gas flow with solid particles as a discrete phase. The continuous gas flow is predicted by solving the governing equations by using the Reynolds Stress turbulence model, and the modeling of the particle motions is based on a Lagrangian approach. The results of the numerical simulations are compared with experimental data as well as with the results of mathematical models. Analysis of computed results shows that increase of relative roughness due to corrosion, wear, or accumulation of particles on the inner walls considerably influences the tangential velocity, cyclone separation efficiency, and cyclone pressure drop especially for high inlet velocities. Decreases in cyclone collection efficiency and pressure drop with the increase in surface roughness are found to be more pronounced for high values of relative roughness.