Soft robots present an avenue toward unprecedented societal acceptance, utility in populated environments, and direct interaction with humans. However, the compliance that makes them attractive also makes soft robots difficult to control. We present two low-cost approaches to control the motion of soft actuators in applications common in human-interaction tasks. First, we present a passive impedance approach, which employs restriction to pneumatic channels to regulate the inflation/deflation rate of a pneumatic actuator and eliminate the overshoot/oscillation seen in many underdamped silicone-based soft actuators. Second, we present a visual servoing feedback control approach. We present an elastomeric pneumatic finger as an example system on which both methods are evaluated and compared to an uncontrolled underdamped actuator. We perturb the actuator and demonstrate its ability to increase distal curvature around the obstacle and maintain the desired end position. In this approach, we use the continuum deformation characteristic of soft actuators as an advantage for control rather than a problem to be minimized. With their low cost and complexity, these techniques present great opportunity for soft robots to improve human–robot interaction.
Current challenges in soft robotics include sensing and state awareness. Modern soft robotic systems require many more sensors than traditional robots to estimate pose and contact forces. Existing soft sensors include resistive, conductive, optical, and capacitive sensing, with each sensor requiring electronic circuitry and connection to a dedicated line to a data acquisition system, creating a rapidly increasing burden as the number of sensors increases. We demonstrate a network of fiber-based displacement sensors to measure robot state (bend, twist, elongation) and two microfluidic pressure sensors to measure overall and local pressures. These passive sensors transmit information from a soft robot to a nearby display assembly, where a digital camera records displacement and pressure data. We present a configuration in which one camera tracks 11 sensors consisting of nine fiber-based displacement sensors and two microfluidic pressure sensors, eliminating the need for an array of electronic sensors throughout the robot. Finally, we present a Cephalopod-chromatophore-inspired color cell pressure sensor. While these techniques can be used in a variety of soft robot devices, we present fiber and fluid sensing on an elastomeric finger. These techniques are widely suitable for state estimation in the soft robotics field and will allow future progress toward robust, low-cost, real-time control of soft robots. This increased state awareness is necessary for robots to interact with humans, potentially the greatest benefit of the emerging soft robotics field.
6 September 2024 in IEEE Robotics and Automation Letters
Rigid robots excel in structured conditions but struggle in more unpredictable or populated environments. Soft robots address these difficulties, but the compliance which gives them their inherent safety also limits their ability to apply desired forces. Jamming/locking reduces this back-drivability but does not allow for directional application of force. We present a hybrid system including pneumatic and tendon actuation as well as a system of cable-driven locking modules, able lock individual joints. Combining these mechanisms yields a device, which can behave as: a soft finger, a fully-rigid finger, and a locally-locking finger which mimics a traditional rigid-link robot. This finger is able to switch between these behaviors on-the-fly, allowing it to adapt to unexpected scenarios, critical for social robots. Using these modes and the ability to adapt real-time, our finger is able to complete common household tasks, difficult for current robots. We characterize the finger's ability to resist force in three actuation modes (Pneumatic, Cable, and Locked), its ability to apply force, and its ability to actuate in 31 different configurations (plus a static all-locked configuration). We also present a demonstration in which the finger conforms to the shape of a computer mouse then clicks a mouse button, and of the finger conforms to the shape of a heavy door handle, then pulling it open. We present the design, fabrication, and characterization of this finger as a demonstration of the underlying concept, which can be broadly applied to social robotics.
11 February 2023 in Journal of Intelligent & Robotic Systems