Kliment Krumov Georgiev

Dr. Kliment Krumov Georgiev

technical University of Sofia Plovdiv Branch, Plovdiv, Bulgaria
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2024 in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
Verified
Journal Article
Open access
PDF file
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev
This paper presents a statistical analysis of the quality of a technological process by investigating the surface roughness of shafts for electric motors obtained during machining. Repeated measurements have been carried out using a portable roughness tester INSIZE ISR - C002 and the results are summarized. Statistical analysis is applied to analyse the accuracy, adjustability, and stability of technological process. The stability of the process is presented by investigating the correlation between the experimental and theoretical curve of the quality index. Accuracy evaluation is performed by calculating the accuracy coefficient. The adjustability analysis is evaluated by the relative position of the distribution curve of the obtained quality index with respect to the tolerance field.

22 June 2024 in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
Verified
Journal Article
Open access
PDF file
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev
PKPavlina Katsarova
Pavlina Katsarova
The present research presents a comparative analysis between experiments conducted with basic equipment for a portable INSIZE ISR - C002 roughness tester and a specially made for the purpose attachment to the device. An analysis is made of the proposed basic device for working with a portable roughness tester INSIZE ISR - C002, and its shortcomings have been determined. In order to facilitate the operator's work with the device and obtain more accurate results, a special device is developed. It is designed using CAD/CAM products and manufactured using additive printing (3D printing). The additive printing technology used reduces its cost. The manufactured device is analyzed and its advantages and disadvantages are determined. Experiments are conducted with both devices and a comparative analysis of the obtained results is made. An analysis of the measurement system (MSA) is made, through which the results of the conducted experiments were analyzed. The comparative analysis shows a number of advantages of the new device compared to the basic one, which provide a basis for the formulated conclusions and recommendations.

28 June 2025 in J
Verified
Journal Article
Open access
PDF file
BCBozhana Chuchulska
Bozhana Chuchulska
MDMariya Dimitrova
Mariya Dimitrova
Boyan Angelov DochevBoyan Angelov Dochev
Boyan Angelov Dochev
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev
Polymers are essential materials in the fabrication of partial and complete dentures, where their mechanical properties directly impact durability, comfort, and clinical performance. This study examines the influence of different manufacturing temperatures on the surface hardness of polymeric materials used in dental applications. A total of 60 experimental samples with a rectangular shape of Vertex ThermoSens polymer (Vertex Dental, 3D Systems, Soesterberg, The Netherlands) were fabricated through injection molding at 280 °C and 300 °C and analyzed over time to assess changes in their properties. Hardness measurements, conducted using the EQUOTIP Shore D hardness tester (Proceq SA, Schwerzenbach, Canton of Zürich, Switzerland), indicated increased hardness over time, with higher values observed in samples fabricated at 300 °C. A two-way ANOVA was performed to evaluate the statistical significance of temperature and time on hardness, revealing a significant effect (F = 14.73, p = 0.0185). These findings suggest that processing polymers at elevated temperatures improves surface hardness, significant for denture longevity and patient comfort. Increased hardness contributes to greater wear resistance. Optimizing polymer manufacturing conditions can thus lead to improved clinical outcomes, ensuring more durable and biocompatible dental prostheses.

22 April 2026 in Polymers
Verified
Journal Article
Open access
PDF file
BCBozhana Chuchulska
Bozhana Chuchulska
MDMariya Dimitrova
Mariya Dimitrova
Boyan Angelov DochevBoyan Angelov Dochev
Boyan Angelov Dochev
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev
Surface roughness and mechanical performance are critical determinants of the clinical behavior, hygiene, and longevity of denture base materials. This study investigated the influence of two extrusion temperatures—280 °C and 300 °C—on both the surface roughness and compressive strength of ThermoSens thermoplastic polymer specimens over a 7-day immersion period. Surface roughness was evaluated at baseline, 24 h, and 7 days using a contact profilometer, while compressive strength was measured after 7 days following ISO 604 guidelines. Samples processed at 300 °C exhibited a significantly greater reduction in surface roughness over time (28.3%) compared with those processed at 280 °C (18.3%). However, although specimens processed at 300 °C showed a greater percentage reduction, their absolute roughness values remained higher than those processed at 280 °C. Compression testing demonstrated higher strength and modulus values in the 300 °C group (91.6 ± 1.8 MPa; 1887.9 ± 42.3 MPa) compared to the 280 °C group (82.3 ± 2.1 MPa; 1755.4 ± 38.7 MPa). These findings indicate a trade-off between improved mechanical performance at higher processing temperatures and lower surface roughness at lower temperatures, highlighting the need for the careful optimization of processing conditions.

31 October 2025 in Instrumentation Mesure Métrologie
Verified
Journal Article
Open access
MHMiroslav H. Hristov
Miroslav H. Hristov
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev

5 August 2026 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Kliment Krumov GeorgievKliment Krumov Georgiev
Kliment Krumov Georgiev
MMMisho Matsankov
Misho Matsankov
MDMario Tanev Dechev
Mario Tanev Dechev
ARAtanas Petrov Radulov
Atanas Petrov Radulov
TDTeodor Demirev
Teodor Demirev
The article presents a study of the overall brightness of semi-transparent materials used in additive manufacturing. Components with varying thicknesses and diverse types of finished surfaces were manufactured and evaluated under various lighting conditions. The test components were fabricated from a transparent PETG (polyethylene terephthalate) material. The printing parameters were selected based on a series of experiments conducted on this type of material. The measurements were conducted on a specially designed and manufactured stand for measuring overall light transmittance. The classical method for evaluating the results according to the normal distribution law was applied. The findings of the studies demonstrate that transmittance is predominantly contingent on the thickness of the component, as opposed to the illuminance or the nature of the surface. The discrepancy in transmittance between thicknesses of 1 and 1.5 mm for all illuminance levels is approximately 12%. As the thickness increases, the discrepancy in transmittance decreases, reaching approximately 1.5% for samples with thicknesses ranging from 2 to 3.5 mm. The light intensity exhibited a negligible effect on transmittance, with an approximate measurement of 1.5%.