Many vehicular applications such as navigation, collision avoidance, and location-based services envisioned under intelligent transportation system (ITS) framework require position information with certain accuracy and reliability. Global navigation satellite system (GNSS) are widely deployed for absolute and relative positioning in a wide range of ITS applications due to their global coverage but these systems have limited accuracy and availability to meet the requirement of many safety-critical applications. This limitation has led to the development of cooperative positioning (CP) methods in a vehicular ad-hoc network. CP methods are based on the assumption that the inter-vehicular ranges are available through some radio ranging method, such as received signal strength, time of arrival, or time difference of arrival. However, the feasibility and accuracy of these radio ranging methods is limited due to the constraints of communication medium and rapidly changing vehicular environment. In this paper, we propose a generalized version of a theoretical framework for the measurement and analysis of inter-vehicular ranges by exchanging GNSS observables between vehicles. More specifically, we investigate the utilization of GNSS observables in the following four categories for range measurement: 1) absolute positions of the vehicles provided by GNSS receivers; 2) raw code pseudoranges; 3) single difference of the raw code pseudoranges; and 4) double difference of the raw code pseudoranges. The developed theoretical framework compares the accuracy of inter-vehicular range measurement using these four observables. This framework is further validated by actual field trials in different mobile environments using two vehicles equipped with GNSS receivers.
We consider the problem of attitude estimation of rigid bodies in motion using low cost inertial measurement unit (IMU). An efficient scheme is proposed using two different Kalman filters by deriving their measurement models for precise attitude (pitch and roll) estimation in the presence of high and prolonged dynamic conditions and gyro bias. Both filters work in a coupled fashion where one of the filters provides accurate estimates of rigid body attitude and external acceleration using the accelerometer in conjunction with the gyroscope while the second filter is responsible to estimate the gyro bias, allowing the proposed scheme to be used in any application with minimal calibration. A new threshold based external acceleration detection module is also introduced to change the confidence level on external acceleration prediction to assist the estimation process. The proposed scheme is tested and compared with other existing estimators in the literature under different dynamical conditions and real-world experimental data sets in order to validate its effectiveness.
This paper discusses the L2-L∞ filter design problem for non-linear two-dimensional (2-D) uncertain continuous systems with state delays and saturation. The non-linear function under consideration is assumed to satisfy the Lipschitz condition while the saturation term is being dealt by using a memory-less sector region methodology. A suitable Lyapunov-Krasovskii functional (LKF) is considered, and the Wirtinger-based integral (WBI) inequality method is used to derive some sufficient conditions which ensure that the resultant filtering error (FE) system is robustly asymptotically stable along-with the specified L2-L∞ disturbance attenuation level γ. A suitable example explains the derived results’ usefulness.
This paper presents an interesting hybrid solution to a challenging estimation and control problem of the Permanent Magnet Synchronous Motor (PMSM). Apart from the inherently nonlinear nature of the PMSM, which makes this problem particularly challenging, is the unavailability of the measurements, rotor position, and speed. In an effort to efficiently cope with such issues along with the random noise environment, the Unscented Kalman Filter (UKF) is chosen to estimate the states of the PMSM dynamic system and the Model Predictive Control (MPC) is utilized to control the state space vector in Pulse Width Modulation (PWM). Additionally, the MPC has also been implemented in combination with the Extended Kalman Filter (EKF) and also with Sliding Mode Control (SMC), in order to vigorously compare these hybrid approaches in terms of accuracy, robustness, and transient response. The MPC-UKF, a combination that has never been implemented before, outperforms the other two by efficiently dealing with the issues of high nonlinearities, by accurately estimating the states while the measurements were practically unavailable, and coping with the fast dynamics of the PMSM.
The electrical power infrastructure of the modern world is advanced, efficient, and robust, yet power outages still occur. In addition to affecting millions of people around the world, these outage events cost billions of dollars to the global economy. In this paper, the revenue loss borne by electricity-supplying companies in the United States due to power outage events is estimated and predicted. Various factors responsible for power outages are considered in order to present an exploratory data analysis at the U.S. level, followed by the top ten affected states, which bear over 85% of the total revenue loss. The loss is computed using historic observational data of electricity usage patterns and the tariff offered by the energy suppliers. The study is supplemented with reliable and publicly available records, including electricity usage patterns, the consumer category distribution, climatological annotations, population density, socio-economic indicators and land area. Machine learning techniques are used to predict the revenue loss for future outage events, as well as to characterize the key parameters for efficient prediction and their partial dependence. The results show that the revenue loss is a function of several parameters, including residential sales, percentage of industrial customer, time-period of the year, and economic indicators. This study may help energy suppliers make risk-informed decisions, while developing revenue generation strategies as well as identifying safer investment avenues for long-term returns.
1 January 2023 in Computational Intelligence and Neuroscience
The deployment of photovoltaic (PV) cells as a renewable energy resource has been boosted recently, which enhanced the need to develop an automatic and swift fault detection system for PV cells. Prior to isolation for repair or replacement, it is critical to judge the level of the fault that occurred in the PV cell. The aim of this research study is the fault‐level grading of PV cells employing deep neural network models. The experiment is carried out using a publically available dataset of 2,624 electroluminescence images of PV cells, which are labeled with four distinct defect probabilities defined as the defect levels. The deep architectures of the classical artificial neural networks are developed while employing hand‐crafted texture features extracted from the EL image data. Moreover, optimized architectures of the convolutional neural network are developed with a specific emphasis on lightweight models for real‐time processing. The experiments are performed for two‐way binary classification and multiclass classification. For the first binary categorization, the proposed CNN model outperformed the state‐of‐the‐art solution with a margin of 1.3% in accuracy with a significant 50% less computational complexity. In the second binary classification task, the CPU‐based proposed model outperformed the GPU‐based solution with a margin of 0.9% accuracy with an 8× lighter architecture. Finally, the multiclass categorization of PV cells is performed and the state‐of‐the‐art results with 83.5% accuracy are achieved. The proposed models offer a lightweight, efficient, and computationally cheaper CPU‐based solution for the real‐time fault‐level categorization of PV cells.