KYUNGNAM KIM

Dr. KYUNGNAM KIM

Department of Highway & Transportation Research, Korea Institute of Civil Engineering and Building Technology, Goyang-si, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2023 in Polymers
Verified
Journal Article
Open access
PDF file
KKKYUNGNAM KIM
KYUNGNAM KIM
TLTri Ho Minh Le
Tri Ho Minh Le
The quality of pavements in tropical climates is negatively affected by the frequent wet and dry cycles during the rainy season, as well as by issues related to overloading from heavy trucks and traffic congestion. Contributing to this deterioration are factors such as acid rainwater, heavy traffic oils, and municipal debris. In light of these challenges, this study aims to assess the viability of a polymer-modified asphalt concrete mixture. This study investigates the feasibility of a polymer-modified asphalt concrete mixture with the addition of 6% crumb rubber powder from waste car tires and 3% epoxy resin to counter the harsh conditions of tropical climate weather. The study involved subjecting test specimens to five to 10 cycles of contaminated water (100% rainwater + 10% used oil from trucks), curing for 12 h, and air drying in a chamber of 50 °C for 12 h to simulate critical curing conditions. The specimens underwent fundamental laboratory performance tests such as the indirect tensile strength test, dynamic modulus test, four points bending test, and Cantabro test, as well as the double load condition in the Hamburg wheel tracking test to determine the effectiveness of the proposed polymer-modified material in actual conditions. The test results confirmed that the simulated curing cycles had a critical impact on the durability of the specimens, with the greater curing cycles leading to a significant drop in the strength of the material. For example, the TSR ratio of the control mixture dropped from 90% to 83% and 76% after five and 10 curing cycles, respectively. Meanwhile, the modified mixture showed a decrease from 93% to 88% and 85% under the same conditions. The test results revealed that the effectiveness of the modified mixture outperformed the conventional condition in all tests, with a more prominent impact observed under overload conditions. Under double conditions in the Hamburg wheel tracking test and a curing condition of 10 cycles, the maximum deformation of the control mixture sharply increased from 6.91 to 22.7 mm, whereas the modified mixture increased from 5.21 to 12.4 mm. Overall, the test results confirm the durability of the polymer-modified asphalt concrete mixture under harsh tropical climate conditions, promoting its application for sustainable pavements, especially in Southeast Asian countries.

1 November 2016 in Journal of Nanoscience and Nanotechnology
Verified
Journal Article
Closed access
RNRosalynn Nankya
Rosalynn Nankya
KKKYUNGNAM KIM
KYUNGNAM KIM

14 June 2024 in Buildings
Verified
Journal Article
Open access
PDF file
SSSung-Pil Shin
Sung-Pil Shin
KKKYUNGNAM KIM
KYUNGNAM KIM
TLTri Ho Minh Le
Tri Ho Minh Le
This research manuscript presents a comprehensive investigation into the prediction and detection of reflective cracking in pavement infrastructure through a combination of machine learning approaches and advanced image detection techniques. Leveraging machine learning algorithms, reflective cracking prediction models were developed and optimized for accuracy and efficiency. Additionally, the efficacy of image detection methods, particularly utilizing Mask R-CNN, was explored for robust and precise identification of reflective cracking on pavement surfaces. The study not only aims to enhance the predictive capabilities of pavement management systems (PMSs) through machine learning-based models but also seeks to integrate advanced image detection technologies to support real-time monitoring and assessment of pavement conditions. By providing accurate and timely detection of reflective cracking, these methodologies contribute to the optimization of pavement maintenance strategies and the overall improvement of pavement infrastructure management practices. Results indicate that the developed machine learning models achieve an average predictive accuracy of over 85%, with some models achieving accuracies exceeding 90%. Moreover, the utilization of a mask region-based convolutional neural network (Mask R-CNN) for image detection demonstrates exceptional precision, with a detection accuracy of over 95% on average across different pavement types and weather conditions. The results demonstrate the promising performance of the developed machine learning models in predicting reflective cracking, while the utilization of Mask R-CNN showcases exceptional accuracy in the detection of reflective cracking from images. This research underscores the importance of leveraging cutting-edge technologies to address challenges in pavement infrastructure management, ultimately supporting the sustainability and longevity of transportation networks.

13 June 2024 in Polymers
Verified
Journal Article
Open access
YKYeong-Min Kim
Yeong-Min Kim
KKKYUNGNAM KIM
KYUNGNAM KIM
TLTri Ho Minh Le
Tri Ho Minh Le
Amid the growing demand for sustainable pavement solutions and the need to incorporate recycled materials into construction practices, this study explored the viability of using crushed thermal power plant bottom ash as a filler in polymer-modified asphalt concrete mixtures. Conventional lime filler was replaced with bottom ash at varying levels (0%, 25%, 50%, and 75%), and the resulting mixtures were evaluated using several performance tests. The optimal replacement level was determined to be 25%, based on the results of the indirect tensile strength (ITS) test. Comparisons between the control mixture and the 25% bottom ash-modified mixture were conducted using the dynamic modulus test, Cantabro test, Hamburg wheel tracking (HWT) test, and tensile strength ratio (TSR) test. The findings indicate that the 25% bottom ash-modified mixture demonstrated improved performance across multiple parameters. The HWT test showed enhanced rut durability, with a recorded depth of 7.56 mm compared to 8.9 mm for the control mixture. The Cantabro test results revealed lower weight loss percentages for the modified mixture, indicating better abrasion resistance. The dynamic modulus test indicated higher resilience and stiffness in both high- and low-frequency stages. The TSR test highlighted improved moisture resistance, with higher TSR values after 10 wet-drying cycles. These improvements are attributed to the fine particle size and beneficial chemical composition of bottom ash, which enhance the asphalt mixture’s density, binder-aggregate adhesion, and overall durability. The results suggest that incorporating 25% crushed bottom ash as a filler in polymer-modified asphalt concrete mixtures is a viable and sustainable approach to improving pavement performance and longevity.

27 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
KKKYUNGNAM KIM
KYUNGNAM KIM
TLTri Ho Minh Le
Tri Ho Minh Le
This study addresses the challenges of overlaying old concrete pavement with asphalt by introducing a new trackless tack coat material containing polymer. The aim is to enhance the durability of asphalt concrete overlay pavement on old cement concrete pavement. It contributes to the development of improved construction techniques for pavement rehabilitation and highlights the need for reliable adhesion performance evaluation based on different spray amounts and surface conditions. Additionally, to evaluate the effect of the adhesion performance based on the spraying amount, a tensile adhesion test was conducted by applying spray amounts of 0.30, 0.45, and 0.60 l/m2 on different surface conditions. The basic and adhesion performances of the polymer-modified tack coat material are evaluated through direct tensile and shear bond strength tests. The test outcomes demonstrated that the newly developed polymer-modified tack coat material had considerably greater adhesion strength compared to the traditional rapid-setting products. Its adhesive strength was 1.68 times higher on concrete and 1.78 times higher on asphalt. The new trackless tack coat material exhibited an adhesion performance of 1.05 MPa in direct tensile strength at 0.45 l/m2, which was 1.21 times higher than the rapid-setting tack coat. Results also confirmed that the new tack coat material exhibits values 1.90 times greater than the conventional rapid-setting tack coat material in shear bond strength, respectively. By simulating the process of separation and re-adhesion of pavement layers caused, the new tack coat material shows a tensile adhesion strength of 63% of the original state, which is advantageous for securing the durability of the pavement. Overall, the newly developed polymer-modified trackless tack coat has been shown to effectively enhance the adhesion performance between pavement layers without process delay, highlighting the potential of the new tack coat material to enhance the durability of asphalt concrete overlay pavement on old cement concrete pavement.

2 January 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JKJewon Kim
Jewon Kim
KKKYUNGNAM KIM
KYUNGNAM KIM
TLTri Ho Minh Le
Tri Ho Minh Le
This study addresses the imperative for enhancing asphalt mixtures tailored for rural pavements, focusing on optimizing RAP mixtures with styrene–butadiene–styrene (SBS)-modified asphalt binders incorporating petroleum resin and oil. Through systematic investigation, the study examines the impact of varying RAP content (25% and 50%) and two SBS-modified asphalt binder types (Type 1 and Type 2) on mechanical properties and sustainability. Laboratory tests reveal that the mix of 25% RAP + 75% Type 1 exhibits exceptional flexibility, evidenced by a high ductility value of 880 mm at 25 °C, enhancing pavement resilience. Conversely, the 50% RAP + 50% Type 2 mixture displays vulnerability to fatigue cracking, while 25% RAP + 75% Type 1 demonstrates superior resistance, with a fatigue vulnerability value of 1524 kPa. The Hamburg Wheel Tracking test highlights the influence of RAP content on rut depth, with the mix of 50% RAP + 50% Type 1 achieving the lowest rutting at 3.9 mm. Overlay test results show the mix of 25% RAP + 75% Type 2’s resilience, with the lowest load reduction at 64.5%, while the mix of 50% RAP + 50% Type 1 exhibits substantial load reduction at 82.1%. Field tests unveil differences in pavement bearing capacities, with the mix of 25% RAP + 75% Type 2 demonstrating a remarkable elastic modulus of 58.5 MPa, indicating heightened bearing capacity. The investigation underscores the significant role of SBS-modified asphalt binders with incorporated petroleum resin and oil in enhancing fatigue resistance for sustainable rural pavements.