Membrane technology has been utilized for water purification application for a long time. Both polymeric and ceramic membranes have been center of interest for their tremendous contribution in this area. Despite their advantages, these synthetic membranes have limitations in terms of performance and durability. To meet the new demands and standards, mixed matrix membranes (MMM) have gained serious importance due to their ability to combine the features of the aforementioned membrane materials, offering better solutions in terms of performance, fouling, permeate quality and longevity. Besides such attractive features, MMMs have not yet reached sufficient maturity to challenge conventional membranes commercially. This review categorizes MMMs on its filler basis into four types; (i) inorganic filler-based MMMs, (ii) organic filler-based MMMs, (iii) biofillers-based MMMd, and (iv) hybrid filler-based MMMs. A discussion is extended to modules and cost of these membranes along with the specific applications of each type of fillers. It also identifies the issues and challenges in the MMM area and highlights the domains that remain to be investigated.
1 November 2012 in Journal of Industrial and Engineering Chemistry
In the early stage of membrane technology development in gas separation, utilization of polymeric membranes has gained attention due to their robustness and ease of fabrication. However, the performance of polymeric membranes is limited by the trade-off between permeability and selectivity. Meanwhile, inorganic membrane is capable to exhibit great enhancement in separation performance but unfortunately its fabrication process is hard and costly. Thus, development of mixed matrix membranes (MMMs) by incorporating inorganic fillers into the polymer matrix has become a potential alternative to overcome the limitations of polymeric and inorganic membranes in gas separation. Nevertheless, fabrication of defect-free MMMs with improved separation performance and without compromising the mechanical and thermal stability is extremely difficult and challenging. In the current review paper, various types of inorganic fillers for MMMs fabrication and recent reported efforts to tailor the underlying problems on MMMs fabrication were discussed. The future outlook to advance the performance of MMMs in gas separation especially for CO2/CH4 separation was highlighted.