Over the past several decades, the international community has been actively engaged in developing a safe method for isolating spent nuclear fuel, high and intermediate level radioactive wase of different degrees of heat generation in deep geological formations on the basis of regulatory requirements existing in each individual country (for example, in the Russian Federation-NP-055-14). Such a storage facility should be equipped with an engineered safety barrier system that combines a range of materials capable of ensuring the safe localization of environmentally and health-threatening nuclear power generation industry and the nuclear industry waste products, in particular. On the basis of the international experience discussed in this article on the design and operation of such facilities, the most universal material in terms of the functions performed as a component of the engineered barrier system is cement and the cement-based product mixed with various components—concrete. Furthermore, due to the possible mutual influence of buffer materials and their transformation over time at interfaces, this work considers the impact of cement-based barriers on other components of engineered barrier systems, the information on which has been accumulated as a result of both analytical laboratory tests and in situ radioactive waste disposal facilities under construction.
Bentonite clays have unique properties that determine their use as the main component of engineered barrier systems (EBS) for the isolation of radioactive waste. At present, the Russian Federation is elaborating the concept of deep geological disposal of radioactive waste in crystalline rocks of the Yeniseisky site, where bentonite clays play an important role in ensuring the safety of the repository for a long period of time. This work demonstrates the first results of short-term laboratory experiments (1 and 3 months) on the thermochemical interaction of bentonite and concrete in the presence of synthetic water at an elevated temperature. These experiments will help predict the effect of EBS materials on montmorillonite. Bentonite from the 10th Khutor deposit (Russia) and Portland cement were used in the experiments. At the first stage of the experiments, solutions were obtained after leaching the concrete with a synthetic groundwater solution for 1 month at 90 °C. At the second stage, the interactions of the obtained solutions with bentonite at 90 °C were studied. As a result of the experiments, the processes of concrete leaching were revealed, which changed the composition and acidity (an increase in the pH from 6.1 to 12.1) of the synthetic water and led to an increase in the porosity of the material in contact with the solution. However, no dissolution of montmorillonite was observed, and the changes were quite small. The research results show the high stability of bentonite from the 10th Khutor deposit under model conditions, which was confirmed by modeling. Thus, we can say that at pH ≈ 12 and at elevated temperatures, montmorillonite retains a stable structure for a long time, which is important for ensuring the safety of disposal in general.
This work is based on a detailed study of samples from three industrial bentonite deposits in Russia (10th Khutor, Zyryanskoe) and Kazakhstan (Taganskoe). The samples of the listed bentonites were undergoing stage-by-stage purification from carbonates, organic matter, and non-clay iron-bearing phase procedures. The conducted research revealed changes in the composition of bentonites already at the first stage of purification, which, however, were not noted for all bentonites, as well as a change in the forms of Fe in smectite structure. The latter is probably associated with changes in cis- and trans-vacant positions. Sorption characteristics with respect to 137Cs are determined using the localization and charges in the smectite layer and the slight changes during purification, along with the specific surface area indicators.
This work is devoted to the study of the effect of acid treatment on the structural and textural properties of natural zeolite and its sorption activity with respect to radioiodide. To carry out the experiments, natural zeolite was treated with nitric acid of various concentrations at 20 and 90 degrees. The following methods were used to study the samples: XRD, SEM, DTA, XRF, FTIR, BET, and CEC analyses. Experiments on the sorption and desorption of radioiodide were carried out. The obtained results indicate that acid treatment results in the gradual leaching of aluminum from the crystal lattice and a significant increase in the specific surface area and microporosity of the zeolite. At the same time, the morphology of clinoptilolite is not significantly changed. Additional studies have shown that acid treatment leads to the hydrophobization of zeolite channels and the formation of an amorphous aluminosilicate phase, which makes a significant contribution to the increase in the specific surface area and microporosity. It was found that, with an increase in the degree of dealumination of the zeolite, there is an increase in the sorption properties with respect to radioiodide. The maximum values of sorption capacity were obtained after treating the zeolite with a 1 M nitric acid solution at 90 °C. With a further increase in the concentration of acid, critical changes in the structure of the zeolite occur, leading to a sharp decrease in the sorption capacity. Iodide sorption is not associated with physical adsorption in the micropores of the zeolite and the newly formed amorphous phase. The main mechanism of the sorption appears to be the interaction with silanol and bridging hydroxyl groups on the surface of the zeolite and the amorphous aluminosilicate phase.
27 March 2025 in The Open Chemical Engineering Journal
Introduction: Ordinary Portland cement-based materials are considered in many concepts of geological isolation of Radioactive Waste (RW) for the design of Engineered Safety Barriers (ESB). The safety functions of cement-based EBS consist of limiting the access of groundwater to the near zone of the Geological Disposal Facility (GDF) of RW and reducing the rate of migration of radionuclides due to diffusion. These factors can be described by the hydraulic conductivity and effective diffusion coefficient values, mainly determined by the porosity of the barrier material. Methods: The article presents experimental data used to calibrate the basic hydration simulation of Ordinary Portland Cement (OPC) concrete considered as a potential material for an engineered barrier in the GDF in the “Yeniseisky” site of the Nizhnekansky crystalline rock massif in the Krasnoyarsk region based on the simulation results using PhreeqC 3.7.3 software. Results: As the result of the current work phase composition of the initial binder and concrete, as well as the chemical composition of water added to the concrete mixture, were established. The obtained data were used for the parameterization of the basic simulation of OPC concrete mixture hydration. Conclusion: OPC concrete porosity, hydraulic conductivity, and pH of the pore solution were calculated. Obtained values wereconsistent with the analytical data collected during the experiments, and the values of the effective diffusion coefficients of the radionuclides that pose the greatest threat to the biosphere and are expected to be isolated in the GDF were predicted.
4 August 2025 in The Open Chemical Engineering Journal
Introduction: This study investigated the stability and radioiodine (I −) sorption properties of AgCl-modified bentonite sorbents under conditions simulating engineered safety barriers (concrete-bentonite contact) in a deep geological radioactive waste disposal facility (GDF). Methods: Synthetic groundwater from the «Yeniseisky» site was filtered through Portland Cement Concrete (PCC) and High Alumina Concrete (HAC) samples. Filtrate pH/Eh were measured, and chemical composition was analyzed via ICP-MS. AgCl-bentonite sorbents were synthesized using two methods (AgCl HMTA and AgCl HYD). Stability was assessed by monitoring Ag dissolution in filtrates using Volhard’s method. Iodide sorption was evaluated using natural and modified bentonite. Results: PCC filtrate showed higher pH (12.43) and lower Eh (−74 mV) than HAC filtrate (pH 11.10, Eh +6 mV). PCC contained elevated Ca2+, while HAC contained trace phosphorus. No Ag dissolution occurred from sorbents in filtrates, confirming stability. AgCl-bentonite exhibited significantly higher I − sorption (Kd = 373±87 – 1070±230 mL·g−1) than natural bentonite (K d = 64±28 mL·g −1), with rapid equilibrium (1 hour). Discussion: The results demonstrate that AgCl-modified bentonite retains high stability and exceptional I −sorption capacity even in alkaline, concrete-impacted environments relevant to GDFs. The absence of Ag dissolution underscores its suitability for long-term containment. However, phosphorus in HAC filtrates may pose a risk of Ag3 PO 4 formation, warranting further study. Conclusions: AgCl-modified bentonite is a promising engineered barrier material for radioiodine isolation in GDFs, particularly at the «Yeniseisky» site. Its efficacy persists in concrete-contact scenarios, though phosphorus interactions require additional investigation.