Krystian Jurowski

Mr. Krystian Jurowski

Opole University of Technology
+1
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2019 in Construction and Building Materials
Verified
Journal Article
Closed access
SGStefania Grzeszczyk
Stefania Grzeszczyk
KJKrystian Jurowski
Krystian Jurowski
KBKornelia Bosowska
Kornelia Bosowska
MGMarek Grzymek
Marek Grzymek

1 January 2015 in Procedia Engineering
Verified
Journal Article
Open access
KJKrystian Jurowski
Krystian Jurowski
SGStefania Grzeszczyk
Stefania Grzeszczyk
This paper presents a dynamic method of concrete testing using Young's modulus. The advantages of the method are compared with the static method and the possibilities of application in practice are discussed. The procedure for concrete dynamic Young's modulus testing is presented. Young's modulus of concrete samples of different compositions have been tested by static and dynamic methods. Conclusions related to Young's modulus of concrete values obtained from static and dynamic testing methods and the influence of concrete composition on these values, have been drawn

22 March 2018 in Materials
Verified
Journal Article
Open access
PDF file
KJKrystian Jurowski
Krystian Jurowski
SGStefania Grzeszczyk
Stefania Grzeszczyk
In this paper, the relationship between the static and dynamic elastic modulus of concrete and the relationship between the static elastic modulus and compressive strength of concrete have been formulated. These relationships are based on investigations of different types of concrete and take into account the type and amount of aggregate and binder used. The dynamic elastic modulus of concrete was tested using impulse excitation of vibration and the modal analysis method. This method could be used as a non-destructive way of estimating the compressive strength of concrete.

18 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
Alina Kaleta-JurowskaAlina Kaleta-Jurowska
Alina Kaleta-Jurowska
KJKrystian Jurowski
Krystian Jurowski
This paper presents the results of tests on high performance concrete (HPC) prepared and cured at various ambient temperatures, ranging from 12 °C to 30 °C (the compressive strength and concrete mix density were also tested at 40 °C). Special attention was paid to maintaining the assumed temperature of the mixture components during its preparation and maintaining the assumed curing temperature. The properties of a fresh concrete mixture (consistency, air content, density) and properties of hardened concrete (density, water absorption, depth of water penetration under pressure, compressive strength, and freeze–thaw durability of hardened concrete) were studied. It has been shown that increased temperature (30 °C) has a significant effect on loss of workability. The studies used the concrete slump test, the flow table test, and the Vebe test. A decrease in the slump and flow diameter and an increase in the Vebe time were observed. It has been shown that an increase in concrete curing temperature causes an increase in early compressive strength. After 3 days of curing, compared with concrete curing at 20 °C, an 18% increase in compressive strength was observed at 40 °C, while concrete curing at 12 °C had a compressive strength which was 11% lower. An increase in temperature lowers the compressive strength after a period longer than 28 days. After two years of curing, concrete curing at 12 °C achieved a compressive strength 13% higher than that of concrete curing at 40 °C. Freeze–thaw performance tests of HPC in the presence of NaCl demonstrated that this concrete showed high freeze–thaw resistance and de-icing materials (surface scaling of this concrete is minimal) regardless of the temperature of the curing process, from 12 °C to 30 °C.

19 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
ZPZbigniew Perkowski
Zbigniew Perkowski
MCMariusz Czabak
Mariusz Czabak
SGStefania Grzeszczyk
Stefania Grzeszczyk
DFDaniel Frączek
Daniel Frączek
KTKarolina Tatara
Karolina Tatara
BJBronisław Jędraszak
Bronisław Jędraszak
The article describes four-point bending tests of three reinforced concrete beams with identical cross-sections, spans, and high-ductility steel reinforcement systems. Two beams were strengthened in the compressed section with a thin layer of reactive powder concrete (RPC) bonded with evenly spaced stirrups. Their remaining sections, and the third reference beam, were made of ordinary concrete. Measurements of their deflections, strains and axis curvature; ultrasonic tests; and a photogrammetric analysis of the beams are the main results of the study. For one of the beams with the RPC, the load was increased in one stage. For the two remaining beams, the load was applied in four stages, increasing the maximum load from stage to stage in order to allow the analysis of the damage evolution before reaching the bending resistance. The most important effect observed was the stable behaviour of the strengthened beams in the post-critical state, as opposed to the reference beam, which had about two to three times less energy-absorbing capacity in this range. Moreover, thanks to the use of the RPC layer, the process of concrete cover delamination in the compression zone was significantly reduced, the high ductility of the rebars was fully utilized during the formation of plastic hinges, and the bending capacity was increased by approximately 12%.

14 November 2024 in Molecules
Verified
Journal Article
Open access
PDF file
Teobald KupkaTeobald Kupka
Teobald Kupka
NMNatalina Makieieva
Natalina Makieieva
Paweł ŚwisłowskiPaweł Świsłowski
Paweł Świsłowski
Małgorzata RajfurMałgorzata Rajfur
Małgorzata Rajfur
AMArtur Malolepszy
Artur Malolepszy
KEKrzysztof Ejsmont
Krzysztof Ejsmont
An addition of carbon nanostructures to cement paste is problematic due to the difficulties in obtaining homogenous mixtures. The paper reports on a more effective way of mixing carboxylated multi-walled carbon nanotubes (MWCNT-COOH) in cement pastes. The additional biological impact of the studied nanomodified cement was analyzed in the case of two moss species’ vitality. The applied approach of obtaining a homogeneous mixture is based on intense mechanochemical mixing of MWCNT-COOH together with polycarboxylate superplasticizer (SP). As a result, a more homogenous suspension of MWCNT-COOH within a liquid superplasticizer, suitable for addition to hydrophilic cement paste, was obtained. FT-IR/Raman spectroscopy was used for materials’ characterization. To explain the mixing process at the molecular level, systematic theoretical studies using density functional theory (DFT) were performed. The structures, interaction energies and IR/Raman vibrational spectra of model carboxylic acids, mixed with functionalized SWCNTs as simplified models of real MWCNTs, were obtained. Due to the controversial opinions on the environmental hazards of carbon nanostructures, additional in vivo studies were performed. In this case, effects of cement modified by the addition of small amounts of MWCNT-COOH with SP in comparison to the composite without carbon nanostructures and control subsoil on the vitality of mosses Polytrichum formosum and Pseudoscleropodium purum were studied.