Leontin Tuta

Dr. Leontin Tuta

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
SSSonia Spandole-Dinu
Sonia Spandole-Dinu
ACAna Ana M. Catrina
Ana Ana M. Catrina
OVOana Cristina Voinea
Oana Cristina Voinea
AAAlina Andone
Alina Andone
SRSperanța Radu
Speranța Radu
GRGeorgiana Rosu
Georgiana Rosu
The increasing radiofrequency (RF) electromagnetic radiation pollution resulting from the development and use of technologies utilizing RF has sparked debate about the possible biological effects of said radiation. Of particular concern is the potential impact on the brain, due to the close proximity of communication devices to the head. The main aim of this study was to examine the effects of long-term exposure to RF on the brains of mice in a real-life scenario simulation compared to a laboratory setting. The animals were exposed continuously for 16 weeks to RF using a household Wi-Fi router and a laboratory device with a frequency of 2.45 GHz, and were compared to a sham-exposed group. Before and after exposure, the mice underwent behavioral tests (open-field test and Y-maze); at the end of the exposure period, the brain was harvested for histopathological analysis and assessment of DNA methylation levels. Long-term exposure of mice to 2.45 GHz RF radiation increased their locomotor activity, yet did not cause significant structural or morphological changes in their brains. Global DNA methylation was lower in exposed mice compared to sham mice. Further research is needed to understand the mechanisms behind these effects and to understand the potential effects of RF radiation on brain function.

1 June 2020
Verified
Conference Paper
Closed access
LTLeontin Tuta
Leontin Tuta
MNMircea Nicolaescu
Mircea Nicolaescu
GRGeorgiana Rosu
Georgiana Rosu
AGAlexandru-Cosmin Grivei
Alexandru-Cosmin Grivei
BBBogdan Barbulescu
Bogdan Barbulescu
The purpose of this paper is to present a method that uses Independent Component Analysis (ICA) in order to filter real-valued signals. The method is highly robust to noise, as it can estimate with high precision the noise that affects the input signal. To underline this, comparisons to high order, multiband FIR filters are performed. An application that uses this method, regarding radar image shape extraction and classification, is also presented.

14 December 2023 in Electronics
Verified
Journal Article
Open access
PDF file
LTLeontin Tuta
Leontin Tuta
FPFlorentina Panait-Radu
Florentina Panait-Radu
FAFelix Ardelean
Felix Ardelean
DGDamian Gorgoteanu
Damian Gorgoteanu
GRGeorgiana Rosu
Georgiana Rosu
This paper discusses the need to accurately determine the population’s exposure to low-intensity radio-frequency electromagnetic fields (RF-EMF) from modern technologies like mobile networks, Wi-Fi, and IoT and proposes a practical solution for this assessment. There is no scientific consensus on the biological effects, mostly due to challenges in conducting accurate biological experiments. Recent research suggests that real-life exposure sources trigger stronger biological responses than laboratory-generated RF-EMF. However, there is a lack of research comparing the effects of these sources. This paper introduces a portable system for assessing and monitoring EMF exposure in urban areas. Employing a Software-Defined Radio (SDR) platform to ensure adaptability, the system incorporates two measurement configurations. The initial version concentrates on determining the average power within a 20 MHz Wi-Fi channel, whereas the subsequent configuration augments its functionality by introducing a frequency sweep. This sweep broadens the scrutinized bandwidth, thereby enriching the captured data content through the storage of spectrum sweeps corresponding to each average power value. These data can be used to create EMF profile maps based on individuals’ geographical coordinates. Compared to current limited-performance commercial exposimeters, the proposed system offers expanded capabilities by broadening the frequency bandwidth, georeferencing measurements, and storing data in an SQL database. Compared to high-performance commercial exposimeters, the major advantage of the system is its ability to detect short-term fluctuations in signal spectra and store the corresponding data for subsequent analysis.

17 February 2022 in Electrical Engineering & Electromechanics
Verified
Journal Article
Open access
PDF file
GRGeorgiana Rosu
Georgiana Rosu
VVV. Velicu
V. Velicu
ABAlexandru Boitan
Alexandru Boitan
GMG. Mihai
G. Mihai
LTLeontin Tuta
Leontin Tuta
OBO. Baltag
O. Baltag
Introduction. Due to the good electrical and thermal properties of carbon, carbon-based materials represent a major trend is various applications, including electromagnetic compatibility. Among carbon-based materials, graphite-impregnated woven fabrics represent a new trend in the field of electromagnetic shielding, with the perspective of being used for protective clothing. The novelty of the proposed work consists in the exhaustive comparative analysis of various carbon-based sample shields by employing both simulation and experimental methods. The selected configurations included a simple graphite plate, a graphite powder strip network, and a graphite-impregnated fabric with 2´2 twill weave. Purpose. The main scope of the analysis is to prove the efficiency of the graphite-impregnated twill woven fabric in the field of electromagnetic shielding. Methods. Two main research methods were employed: simulation and experiment, both following the same protocol: the shield placed in the middle, with the excitation (transmitting antenna) on one side and the measurement / receiving antenna on the other. The experimental stage was thorough, being performed in two different laboratories and by applying the double transverse electromagnetic (TEM) cell method and the shielded box method. Results. A significant difference yielded from the comparison of the simulation and experimental results for the shielding effectiveness, probably due to the fact that the virtual model is an idealized version of the physical one, not taking into account its imperfections. The virtual analysis yielded the graphite plate shield as the most efficient, followed closely by the twill fabric. The graphite strip network had significantly poorer performance compared to the other two shields, probably due to the electrical contact imperfections between the graphite strips and the optical transparency of the shield. The main focus of the analysis was the twill woven graphite-impregnated fabric; therefore, its shielding effectiveness was determined through simulation and experiment. The experimental analysis was performed in two stages in two different electromagnetic compatibility laboratories, by employing the double TEM cell method and the shielded box method, respectively, both methods providing similar results and classifying the shielding performance as good. Practical value. The paper provides an accurate analysis of the graphite-impregnated 2´2 twill woven fabric in terms of electromagnetic shielding effectiveness, by employing both simulation and experimental methods, and comparing its performance to the one other graphite-based shields.

25 November 2022 in Atmosphere
Verified
Journal Article
Open access
PDF file
GCGhita Cristian
Ghita Cristian
LTLeontin Tuta
Leontin Tuta
IMIren-Adelina Moldovan
Iren-Adelina Moldovan
CIConstantin Ionescu
Constantin Ionescu
MNMircea Nicolaescu
Mircea Nicolaescu
The parameters influencing the sea level measured with ultrasonic devices that are analyzed in this paper are the air temperature, atmospheric pressure and wind speed. As these variations are independent to each other and to the sea level, they can be removed from the measured sea level by applying a filtering algorithm based on independent component analysis (FastICA), adapted and improved for this application. The sound speed increases with temperature, so an internal temperature sensor is required to compensate for the sound-speed variation. Though this may improve the measurement accuracy, it is not enough to achieve the best results because there is a discrepancy between the internal sensor and the actual environment temperature. For high accuracy measurements, an external temperature sensor is required. In our case, we imported temperature datasets from a weather station, along with other datasets regarding atmospheric pressure and wind speed. The use of these external datasets, along with an algorithm based on principal component analysis (PCA) for error removal and the filtering algorithm based on FastICA for environmental phenomena extraction, allows us to achieve more accurate values for the Black Sea level in Constanta (2017–2020), independent of external influences.

10 January 2024 in Electronics
Verified
Journal Article
Open access
PDF file
LTLeontin Tuta
Leontin Tuta
GRGeorgiana Rosu
Georgiana Rosu
AAAlina Andone
Alina Andone
SSSonia Spandole-Dinu
Sonia Spandole-Dinu
LFLars Ole Fichte
Lars Ole Fichte
In recent decades, the widespread use of mobile phones and wireless technologies has led to a significant increase in radiofrequency electromagnetic fields (RF-EMFs), raising concerns about continuous RF-EMF exposure among the general population. Recent research indicates that real-life RF signals are more biologically active than controlled laboratory signals with a low variability, suggesting that living organisms can adapt to EMF exposure when the pattern has a low variability. However, using real-life sources with unpredictable variation signals in biological experiments contradicts the principle of experiment controllability. This paper aims to investigate the nature of signals generated by current sources of ambient EMFs in terms of stationarity, with the goal of replicating them in biological experiments to study the effects of EMF exposure. Employing a range of statistical methodologies, starting with descriptive statistical analysis and progressing to the advanced APDP and APTF methods, an examination is conducted on a collection of Wi-Fi signal recordings across various operating modes, with particular attention given to video streaming. The chosen datasets are scrutinized with respect to their adherence to a Gaussian distribution and the concept of stationarity. The results indicate that the observed Wi-Fi signals lack stationarity in both the time and frequency domains. However, based on the analytical findings, it is possible to generate signals in frequency that authentically replicate Wi-Fi signals, accounting for nonstationarity considerations.