Efficient directional excitation of planar surface plasmon polaritons (SPPs) has important and wide applications in micro–nano photonic technology. Recently, by using the geometric phase and spin–orbit interaction, catenary structures have been applied to the directional control of SPPs and showed excellent performance. However, due to the need to use the chirality of the subwavelength catenary apertures, the previously studied systems were only suitable for circularly polarized light. Here, based on a catenary metasurface we theoretically design and experimentally demonstrate a SPP directional launcher used for linearly polarized light. The numerical calculation results show that the directional extinction ratio reaches up to 35 dB under the normal incidence of p-polarized light at 750 nm which is 5 dB higher than the maximum extinction ratio in the existing results as we know. The experimental results show that the resonant wavelength position, bandwidth and extinction ratio change trend well match the theoretical results. The physical mechanism is analyzed and it is found that the asymmetric quadrupole mode is the key factor leading to the directional SPPs which is completely different from the geometric phase modulation mechanism to excite the directional SPPs of circularly polarized light in the catenary metasurface. These principles and methods could open new doors for future chip-level photonic device or system design such as multi-directional beam splitters and polarization detectors.
With the rapid development of on-chip optics, integrated optical devices with better performance are desirable. Waveguide couplers are the typical integrated optical devices, allowing for the fast transmission and conversion of optical signals in a broad working band. However, traditional waveguide couplers are limited by the narrow operation band to couple the spatial light into the chip and the fixed unidirectional transmission of light flow. Furthermore, most of the couplers only realize unidirectional transmission under the illumination of the linear polarized light. In this work, a broadband polarization directional coupler based on a metallic catenary antenna integrated on a silicon-on-insulator (SOI) waveguide has been designed and demonstrated under the illumination of the circularly polarized light. By applying the genetic algorithm to optimize the multiple widths of the metallic catenary antenna, the numerical simulation results show that the extinction ratio of the coupler can be maintained larger than 18 dB in a wide operation band of 300 nm (from 1400 to 1700 nm). Moreover, the coupler can couple the spatial beam into the plane and transmit in the opposite direction by modulating the rotation direction of the incident light. The broadband polarization directional coupler might have great potential in integrated optoelectronic devices and on-chip optical devices.