lian shuai long

Mr. lian shuai long

Guizhou Provincial Key Laboratory of Rock and Soil Mechanics and Engineering Safet
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 April 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJiashen Li
Jiashen Li
LLlian shuai long
lian shuai long
YHYansen Huang
Yansen Huang
CWChaolin Wang
Chaolin Wang
The acoustic emission (AE) characteristics of rock during loading can reflect the law of crack propagation and evolution in the rock. In order to study the fracture mode in the process of rock fracture, the AE characteristics and crack types of red sandstone during fracture were investigated by conducting Brazilian indirect tensile tests (BITT), direct shear tests (DST), and uniaxial compression tests (UCT). The evolution law of AE event rate, RA and AF values, and the distribution law of RA–AF data of red sandstone samples in three test types were analyzed. Based on the kernel density estimation (KDE) function and the coupling AE parameters (RA–AF values) in DST and BITT, the relatively objective dividing line for classifying tensile and shear cracks was discussed, and the dividing line was applied to the analysis of fracture source evolution and the failure precursor of red sandstone. The results show that the dividing line for classifying tensile and shear cracks of red sandstone is AF = 93RA + 75. Under uniaxial compression loading, the fracture source of red sandstone is primarily shear source in the initial phase of loading and tensile source in the critical failure phase, and the number is far greater than shear source. K = AF/(93RA + 75) can be defined as the AE parameter index, and its coefficient of variation CV (k) can be used as the failure judgment index of red sandstone. When CV (k) < 1, it can be considered that red sandstone enters the instability failure phase.

21 October 2024 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
Verified
Journal Article
Open access
PDF file
SLShuaiLong Lian
ShuaiLong Lian
BJBi Jing
Bi Jing
YZYu Zhao
Yu Zhao
CWChaolin Wang
Chaolin Wang
LLlian shuai long
lian shuai long
KZKun Zheng
Kun Zheng
To further raise the gas extraction efficiency of the tight sandstone, the liquid nitrogen (LN2) freezing-thawing cycles method can be employed to improve the permeability of the low-permeability reservoirs. Permeability is generally regarded as a macroscopic description of the pore structure and usually has functional relationship to pore structure properties. The permeability of the rock is closely related to the change of microscopic pore structure. The permeability of rock depends on how the subzero temperatures changed the microscopic pore structure of rock, but it has not yet been confirmed obviously. In this study, the nuclear magnetic resonance (NMR) technique was adopted to investigate the pore structure evolution law and permeability of the tight sandstone with different LN2 freezing-thawing cycles. The results demonstrate that the LN2 freezing-thawing cycles promotes pore development and micro-fracture connection, and enhances the pore connectivity. The proportion of meso-pores, macro-pores and micro-fractures in the sandstone samples increases significantly, which provides a channel for the sandstone gas flow and extraction. Total porosity and effective porosity of the samples present a trend of rapid increase as the number of LN2 freezing-thawing cycles increasing, while the residual porosity decreases as the number of LN2 freezing-thawing cycles increasing. Coates model, SDR model (mean T2 model) and PP model were used to calculate and evaluate the permeability of the samples subjected to different LN2 freezing-thawing cycles. Furthermore, PP model can provide a better permeability estimate than the classical Coates and SDR model.

8 December 2021 in Machines
Verified
Journal Article
Open access
PDF file
LLlian shuai long
lian shuai long
JLJiashen Li
Jiashen Li
GFGan fei
Gan fei
BJBi Jing
Bi Jing
CWChaolin Wang
Chaolin Wang
KZKun Zheng
Kun Zheng
Freezing–thawing action has a great impact on the physical and mechanical deterioration processes of rock materials in cold areas where environmental changes are very complicated. The direct shear test under unloading normal stress was adopted to investigate the shear mechanical behavior of sandstone samples after a freezing–thawing cycle in this paper. The failure shear displacement (Dsf), the failure normal displacement (Dnf), the shear displacement of unloading (Dsu), and the normal displacement of unloading (Dnu) were analyzed to describe the evolution of shear and normal deformation during the test. The results indicated that the shear displacement increased as the freezing–thawing cycle duration increased in a direct shear test under unloading normal stress. The unloading rate and the number of freezing–thawing cycles affected the failure pattern of the rock sample significantly in both the direct shear test under unloading normal stress and the direct shear test. The three-dimensional inclination angle, the distortion coefficient, and the roughness correlation coefficient of the fracture surface are dependent on the number of freezing–thawing cycles and the unloading rate. The surface average gradient mode of the fracture surface decreased as the freezing–thawing cycle times and unloading rate rose.

16 May 2022 in Machines
Verified
Journal Article
Open access
PDF file
MTMingyang Teng
Mingyang Teng
JLJiashen Li
Jiashen Li
LLlian shuai long
lian shuai long
BJBi Jing
Bi Jing
CWChaolin Wang
Chaolin Wang
In this study, the failure characteristics of self-made rock with internal flaws under shear were studied and a numerical simulation analysis was carried out. Firstly, based on basic physical and mechanical tests, the shear strength characteristics of rocks with built-in 3D defects were summarized. PFC3D simulation software was used to model the samples with flaws, and the microscopic parameters were calibrated according to the test results. From the simulation results, it was found that the generation mode of microcracks from the flaw tip was different. The microcracks of forward shear and reverse shear were mainly generated from the horizontal direction, while the microcracks of lateral shear gradually increased from the upper and lower ends of the flaw in the opposite direction. When the peak shear strength was reached, the total number of cracks was the largest in lateral shear and the smallest in forward shear. When studying the particle velocity vector field, it was found that when reaching the peak shear strength, the particles on both sides of the prefabricated flaw appeared to be in vortex motion. When α = 45° and σn = 2 MPa, the failure mode of forward shear and lateral shear was shear-tensile-shear (S-T-S), and that of reverse shear and the intact specimen was shear-shear-shear (S-S-S). The lateral shear tensile effect was the most obvious and was mainly concentrated in the middle part of the sample.