In the precision processing industry, maintaining the accuracy of machine tools for an extensive period is crucial. Machining accuracy is affected by numerous factors, among which spindle thermal elongation caused by an increase in machine temperature is the most common. This paper proposed a key temperature point selection algorithm and thermal error estimation method for spindle displacement in a machine tool. First, highly correlated temperature points were clustered into groups, and the characteristics of small differences within groups and large differences between groups were realized. The optimal number of key temperature points was then determined using the elbow method. Meanwhile, the long short-term memory (LSTM) modeling method was proposed to establish the relationship between the spindle thermal error and changes of the key temperature points. The results show the largest root mean square errors (RMSEs) of the proposed LSTM model and the key temperature point selection algorithm were within 0.6 µm in the spindle thermal displacement experiments with different temperature changes. The results demonstrated that the combined methodology can provide improved accuracy and robustness in predicting the spindle thermal displacement.
Machine tool (MT) accuracy is an important factor in the industry and is affected by heat generation through internal and external moving parts; the electrical components used; and variable environmental temperatures. Thermal errors lead to 40–60% of all MT errors. To improve MT accuracy, efficient techniques to minimize thermal errors must be identified. This study investigated the coolant temperature effects under different rotating speeds of a standalone built-in spindle system and computer numerical control (CNC) machine with a direct-drive spindle on the accuracy of thermal deformation prediction. The z-axis thermal deformation of the standalone built-in spindle system and CNC machine with a direct-drive spindle was conducted at different spindle rotating speeds and coolant temperatures at a constant coolant flow rate of 5 LPM. All experiments were conducted in a steady and dynamic operation according to ISO 230-3. For the standalone built-in spindle system, in comparison to the Mares model, the developed new model based on the coolant temperature effect on the Mares model (Mares CT model) can improve the thermal deformation prediction accuracy by 18.17% to 39.50% at different coolant temperatures of 12 C to 26 C and the accuracy can be controlled within the range of 0.03 m to 5.24 m, while the supply coolant temperature is above 16 C. However, the thermal compensation analysis of the Mares CT model for a CNC machine with a direct-drive spindle shows a thermal deformation prediction accuracy improvement of 58.30% to 66.35% at different coolant temperatures of 22 C to 28 C and the accuracy can be controlled within the range of 0.14 m to 4.05 m. To validate the feasibility of the compensation model in real machining processes, dynamic operational analysis was performed for a standalone built-in spindle system and a CNC machine with a direct-drive spindle, and the thermal deformation prediction accuracy improved by 12.19% to 35.53% with the standalone built-in spindle system and 40.25% to 60.33% with the CNC machine with a direct-drive spindle. The compensation model analysis shows that the coolant temperature has a high impact on thermal deformation prediction and markedly affects system accuracy within certain limits.
11 March 2023 in The International Journal of Advanced Manufacturing Technology
In this study, silica gel and sodium polyacrylate desiccants are coated onto a finned tube heat exchanger (Desiccant Coating Heat Exchanger, DCHE), which can absorb the vapor in the process air for dehumidification. In the experiments, the desiccant is coated on fins using the dense coating method, which causes the fixed fin area to be coated with greater amounts of desiccants for a better dehumidification performance. This study discusses the dehumidification performances of a single stage DCHE and two-stage DCHEs in series under different relative humidity conditions of the inlet process air and different regeneration water temperatures. The results show that the thermal coefficient of performance (COPth) of the DCHEs for the two desiccants prepared by the dense coating method is better than that of DCHEs with the general immersing coating method by a factor of 2–2.4. The two-stage DCHEs in series have a lower supply humidity ratio than a single stage DCHE at different inlet humidity levels, and they can be used in the industry when a special low humidity manufacturing process is required. The overall dehumidifying capacities of two-stage series-connected DCHEs at regeneration temperatures of 50 °C and 70 °C are approximately twice as high as those of a single stage DCHE. The COPth value of a single stage or two stages increases with an increase in the inlet humidity of the process air. The COPth values of the sodium polyacrylate single stage and two-stage DCHEs are 1–1.3 times greater than those of the silica gel single stage and two-stage DCHEs at a high inlet air humidity. Finally, the effects of different regeneration water temperatures on the performance of DCHEs are investigated. With an increase in the regeneration water temperature, the COPth value, dehumidifying capacity and regeneration capacity of single stage or two-stage DCHEs increase as well.
24 June 2025 in International Journal of Precision Engineering and Manufacturing-Green Technology