The SM-MSR (small modular molten salt reactor) has a good prospect for development with regards to combining the superiority of the molten salt reactor and modularization technologies, showing the advantages of safety, reliability, low economic cost and flexibility of site selection. However, because its internal structural parts are not easily replaced, and the outer shielding structure is limited, the lifespan of the reactor vessel and its in-reactor shielding design needs to be addressed. In order to find an optimal shielding model with both high fuel efficiency and strong radiation shielding capability, five different design schemes were proposed in this work, which varied in thickness and boron concentration in inner-shielding materials. The neutron/gamma flux and DPA (displacements per atom)/helium production rates were evaluated to obtain an appropriate scheme. Several beneficial results were obtained. Considering the above factors and the actual manufacturing process, 20 cm-thick boron graphite with a 5 wt% Boron-10 concentration combined with a 1 cm-thick Hastelloy barrel was chosen as the in-reactor shielding structure. Outside the reactor, the neutron flux was reduced to 8.33 × 10¹⁰ cm⁻² s⁻¹, and the gamma flux was decreased to 1.13 × 10¹¹ cm⁻² s⁻¹. The vessel/barrel material could maintain a lifespan of more than 10 years, while the burnup depth was 6.25% lower than that of a model without inner-shielding. The conclusions of this research can provide important references for the shielding design and parameter selections of small molten salt reactors in the future.

Small modular reactors with power below 300 MW have the advantages of small specific mass, long lifetime, and flexible power supply, and they are suitable for providing power support for small and medium-sized towns with small populations and remote areas without grid coverage. In this paper, a small modular S-CO₂-cooled molten salt reactor is proposed, and the design of a 10 MW small modular chlorine salt fast reactor (sm-MCFR) with 20 years of operation without refueling is presented. The neutron feasibility of the S-CO₂-cooled small modular chlorine fast reactor is analyzed in terms of neutron energy spectrum, reactivity control, temperature reactivity coefficient, and power distribution. A distinctive feature of the sm-MCFR is the use of chlorine salts with high heavy metal solubility and a hard energy spectrum, allowing the core size to be minimized while maintaining the maximum lifetime. The designed core is about 2.44 m in diameter and 2.24 m in height. Meanwhile, the sm-MCFR uses control drum control as the control system, which can effectively achieve reactivity control without increasing the reactor size. The final optimized sm-MCFR has a negative temperature reactivity coefficient, which is necessary to ensure the safe operation of the reactor.

Molten salt reactor (MSR), the only one using liquid fuel in the six types “Generation IV” reactors, is very different from reactors in operation now and has initiated very extensive interests all over the world. This paper is primarily aimed at investigating the breeding characteristics of high-power thorium molten salt reactor (TMSR) based on the two-fluid molten salt breeder reactor (MSBR) with a superior breeding performance. We explored the optimized structure to be a thorium-based molten salt breeder reactor with different core conditions and different postprocessing programs, and finally got the breeding ratio of 1.065 in our TMSR model. At last we analyzed the transient security of our optimized model with results show that the temperature coefficient of core is −3 pcm/K and a 2000 pcm reactivity insertion can be successfully absorbed by the core if the insertion time is more than or equal to 5 s and the core behaves safely.