The number of studies involving life cycle assessment has increased significantly in recent years. The life cycle assessment has been applied to assess the environmental performance of water infrastructures, including the environmental impacts associated with construction, maintenance and disposal, mainly evaluating the amount of greenhouse gas emissions, as well as the consumption of energy and natural resources. The objective of this paper is to present an overview of permeable pavements and show studies of life cycle assessment that compare the environmental performance of permeable pavements with traditional drainage systems. Although the studies found in the literature present an estimate of the sustainability of permeable pavements, the great heterogeneity in the evaluation methods and results is still notable. Therefore, it is necessary to homogenize the phases of goal and scope, inventory analysis, impact assessment and interpretation. It is also necessary to define the phases and processes of the evaluation, as well as the minimum amount of data to be considered in the modelling of life cycle assessment, in order to avoid heterogeneity in the functional units and other components. Thus, more consistent results will lead to a real evaluation of the environmental impacts caused by permeable pavements. Life cycle assessment studies are essential to guide planning and decision-making, leading to systems that consider increasing water resources and reducing natural disasters and environmental impacts.

There is a growing concern about the scarcity of water resources due to population growth and increased demand for potable water. Thus, the rational use of water has become necessary for the conservation of such resources. The objective of this study is to estimate the potential for potable water savings in buildings of different sectors—residential, public and commercial—in the city of Florianópolis, southern Brazil, by using stormwater harvested from porous pavements. Models were constructed to assess infiltration and rainwater quality; samples of stormwater from a local road were collected to evaluate its quality; and computer simulation was performed to assess the potential for potable water savings and rainwater tank sizing. Draining asphalt concrete slabs with two types of modifiers were used, i.e., tire rubber and SBS polymer—styrene-butadiene-styrene. The Netuno computer programme was used to simulate the potential for potable water savings considering the use of rainwater for non-potable uses such as flushing toilets and urinals, cleaning external areas, and garden watering. Average stormwater infiltration was 85.4%. It was observed that stormwater is not completely pure. From the models, the pH was 5.4 and the concentrations of ammonia, phosphorus, nitrite, and dissolved oxygen were 0.41, 0.14, 0.002, and 9.0 mg/L, respectively. The results for the stormwater runoff of a paved road were 0.23, 0.11, 0.12, 0.08, 1.41, 2.11, 0.02, and 9.0 mg/L for the parameters aluminium, ammonia, copper, chromium, iron, phosphorus, nitrite, and dissolved oxygen, respectively; and the pH was 6.7. In the city of Florianópolis, which has a surface area of paved roads of approximately 11,044,216 m², the potential for potable water savings ranged from 1.2% to 19.4% in the residential sector, 2.1% to 75.7% in the public sector and 6.5% to 70.0% in the commercial sector.

While rainwater harvesting can provide additional water resources, this approach is largely undertaken using water from roofs. More recently, the potential for using stormwater harvested from permeable pavements was recognised as a potential additional water resource. The objective of this study was to estimate the reduction of environmental impacts caused by traditional drainage systems and centralised water utilities if permeable pavement systems were used to harvest stormwater for nonpotable purposes in buildings. The lifecycle environmental impacts and costs associated with the proposed pavements and hydraulic systems were assessed. The city of Glasgow was chosen as a case study. We used the Netuno computer programme to estimate the potential for potable water savings considering the use of stormwater for nonpotable purposes and the SimaPro software to perform a lifecycle assessment (LCA). With the implementation of permeable pavements and stormwater utilisation, great reductions in lifecycle emissions (i.e., CO₂-, SO₂-, and PM_2.5-equivalent emissions) were observed. The proposed system also proved to be economically feasible, i.e., a payback period equal to 16.9 years. The results show the economic and environmental feasibility of permeable pavements when used on a large scale, proving to be an important strategy to reduce water and environmental stresses caused by centralised water utilities and traditional drainage systems.