A new polythioester (PTE), poly(3-mercapto-2-methylpropionate) [P(3M2MP)], and its copolymer with 3-hydroxybutyrate (3HB) were successfully biosynthesized from 3-mercapto-2-methylpropionic acid as a structurally-related precursor. This is the fourth PTE of biological origin and the first to be α-methylated. P(3M2MP) was biosynthesized using an engineered Escherichia coli LSBJ, which has a high molecular weight, amorphous structure, and elastomeric properties, reaching 2600% elongation at break. P(3HB-co-3M2MP) copolymers were synthesized by expressing 3HB-supplying enzymes. The copolymers were produced with high content in the cells and showed a high 3M2MP unit incorporation of up to 77.2 wt% and 54.8 mol%, respectively. As the 3M2MP fraction in the copolymer increased, the molecular weight decreased and the polymers became softer, more flexible, and less crystalline, with lower glass transition temperatures and higher elongations at break. The properties of this PTE were distinct from those of previously biosynthesized PTEs, indicating that the range of material properties can be further expanded by introducing α-methylated thioester monomers.
This study aimed to evaluate the physical properties and biodegradability of sulfur-vulcanized polyhydroxyalkanoates (PHAs) with unsaturated side chains. As a vulcanizable PHA, poly(3-hydroxybutyrate-co-3-hydroxy-5-hexenoate) [P(3HB-co-3H5HE)] was biosynthesized with a 3H5HE fraction of 3–47 mol% using recombinant Escherichia coli and subsequently vulcanized with varying sulfur contents (2–20 per hundred resin, phr) in the presence of zinc oxide, stearic acid, and 2-mercaptobenzothiazole as curing agents. The vulcanized PHA copolymers were insoluble in chloroform, indicating the formation of a cross-linked network. Raman spectroscopy revealed the functional loss of the double bonds in the polymers. After the vulcanization with 5 phr sulfur, the tensile strength and elongation at break of P(3HB-co-47 mol% 3H5HE) increased from 0.6 MPa to 6.3 MPa and from 430% to 813%, respectively. This sample exhibited low tensile set (8%) after 200% elongation, indicating rubber-like properties. Although biodegradability decreased with increasing crosslink density, vulcanized P(3HB-co-3H5HE) exhibited a greater degradation potential than vulcanized rubber but was lower than that of non-vulcanized P(3HB-co-3H5HE). These findings demonstrate that sulfur vulcanization can enhance the resilience of unsaturated PHAs, making them suitable for elastomeric and environmental applications.
1 October 2017 in Brazilian Journal of Chemical Engineering
A very important step in the study of bioprocesses is the modeling and simulation of bioreactors. This paper presents the AnaBioPlus software package, which was developed for teaching and research purposes concerning the analysis of bioreactors. The package consists of two programs: OptimusFerm and SimulaFerm. OptimusFerm allows the analysis of experimental batch cultivation data sets in order to estimate parameters of kinetic models by means of a differential evolution method. SimulaFerm performs simulations obtaining values of cell growth, product formation, and limiting substrate consumption for batch, fed-batch and continuous cultivations. Thirty-two kinetic models of cell growth are available in OptimusFerm and SimulaFerm. Two case studies are described in order to illustrate the use of AnaBioPlus. The results show that AnaBioPlus is a very useful tool for the analysis of bioprocesses. Furthermore, it presents a user-friendly graphical interface and is freely available to users, in both English and Portuguese versions.