Distortions of current and voltage waveforms from a sinusoidal shape are, not only a source of technical problems, but also have serious economic effects. Their occurrence is related to the common use of loads with nonlinear current-voltage characteristics. These are both high-power loads (most often power electronic switching devices supplying high-power drives), but also widely used low-power loads (power supplies, chargers, energy-saving light sources). The best way to eliminate these distortions is to use active power filters. The cost of these devices is relatively high. Therefore, scientists all over the world are conducting research aimed at developing techniques for the proper placement of these devices, in order to minimize their investment costs. The best solution to this problem is to use optimization techniques. This paper compares the methods and criteria used by the authors of publications dealing with this topic. The summary also indicates a possible direction for further work.

The paper is related to the problem of modeling and optimizing power systems supplying, among others, nonlinear loads. A software solution that allows the modeling and simulation of power systems in the frequency domain as well as the sizing and allocation of active power filters has been developed and presented. The basic assumptions for the software development followed by the models of power system components and the optimization assumptions have been described in the paper. On the basis of an example of a low-voltage network, an analysis of the selection of the number and allocation of active power filters was carried out in terms of minimizing losses and investment costs under the assumed conditions for voltage total harmonic distortion (THD) coefficients in the network nodes. The presented examples show that the appropriate software allows for an in-depth analysis of possible solutions and, furthermore, the selection of the optimal one for a specific case, depending on the adopted limitations, expected effects, and investment costs. In addition, a very high computational efficiency of the adopted approach to modeling and simulation has been demonstrated, despite the use of (i) element models for which parameters depend on the operating point (named iterative elements), (ii) active filter models taking into account real harmonics reduction efficiency and power losses, and (iii) a brute force algorithm for optimization.

Purpose: The change in the way of active power filters (APF) location can lead to overall cost reduction due to less number or less power of APFs required. The goal of this paper was to minimize the APF currents what is equivalent to solution with less apparent power of installed devices. The next step consists in development of new methods of APF optimal location.Design/methodology/approach: Some scripts integrating optimization and harmonic analysis methods in Matlab and PCFLO software environments have been developed in order to achieve the goal.Findings: Solution to the minimization problem determines the current spectrum of an APF connected to a selected system bus in accordance with some optimization strategies which among others enable minimization of THDV coefficients.Research limitations/implications: The APF control algorithm defined in the frequency domain and based on given current spectrum could lead to some problems with synchronization between APF instantaneous current and compensated current waveforms.Originality/value: There are many papers on APFs but usually systems in which an APF is connected near a nonlinear load are analyzed. Some attempts to solve the more complex problems of synchronized multipoint compensation have been already made but there is still no generally accepted and commonly used solution.

The transmission of electricity from the source to the load is mainly carried out using a three-phase line

Network working conditions are influenced noticeably by the connection of renewable energy sources to distribution networks. This becomes more and more important due to the increase in renewable energy source penetration over the last few years. This in turn can lead to a mass effect. As a result, the classical open network model with simple unidirectional direction of energy flow has been replaced with an active model that includes many local energy sources. This paper deals with the analysis of long- and short-term changes in power and energy generated by three types of renewable energy sources with similar rated power and which operate in the same region (i.e., located no more than tens of kilometers away). The obtained results can be a starting point for a broader evaluation of the influence of renewable energy sources on power quality in power systems, which can be both positive (supply reliability) and negative (voltage fluctuations and higher harmonics in current and voltage waveforms). It is important not only to correctly place but also to assure the diversity of such sources as it has been confirmed by the source variability coefficient. The long-term analysis allows us also to estimate the annual repeatability of energy production and, furthermore, the profitability of investment in renewable sources in a given region.