We present the use of a linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single stage, pumped with pulses from a compact infrared (IR) laser source, to generate a supercontinuum (SC) carrying significant spectral power in the deep ultraviolet (UV) [200–300 nm]. The generated SC extends from the near IR down to with 0.58 mW/nm and down to with 0.83 mW/nm in the deep UV.
We present a pump-probe technique for monitoring ultrafast polarizability changes. In particular, we use it to measure the plasma density created at the temporal focus of a self-compressing higher-order pump soliton in a gas-filled hollow-core photonic crystal fiber. This is done by monitoring the wavelength of the dispersive wave emission from a counterpropagating probe soliton. By varying the relative delay between pump and probe, the plasma density distribution along the fiber can be mapped out. Compared with recently introduced interferometric side probing for monitoring the plasma density, our technique is relatively immune to instabilities caused by air turbulence and mechanical vibration. The results of two experiments on argon- and krypton-filled fiber are presented and compared to numerical simulations. The technique provides an important tool for probing photoionization in many different gases and gas mixtures, as well as ultrafast changes in dispersion in many other contexts.
We report the use of prism-assisted side-coupling to investigate the spatio-temporal dynamics of photoionization in an Ar-filled hollow-core photonic crystal fiber. By launching four different LP core modes we are able to probe temporal and spatial changes in the modal refractive index on timescales from a few hundred picoseconds to several hundred microseconds after the ionization event. We experimentally analyze the underlying gas density waves and find good agreement with quantitative and qualitative hydrodynamic predictions. Moreover, we observe periodic modulations in the MHz-range lasting for a few microseconds, indicating nanometer-scale vibrations of the fiber structure, driven by gas density waves.
In this work, the design of an integrated radiometer frontend for earth observation applications on satellites is presented. By means of the efficient electro-optic modulation of a laser pump with the observed millimeter-wave signal followed by the detection of the generated optical sideband, a room-temperature low-noise receiver frontend alternative to conventional Low Noise Amplifiers (LNAs) or Schottky mixers is proposed. Efficient millimeter-wave to 1550 nm upconversion is realized via a nonlinear optical process in a triply resonant high-Q Lithium Niobate (LN) Whispering Gallery Mode (WGM) resonator. By engineering a micromachined millimeter-wave cavity that maximizes the overlap with the optical modes while guaranteeing phase matching, the system has a predicted normalized photon-conversion efficiency per pump power, surpassing the state-of-the-art by around three orders of magnitude at millimeter-wave frequencies. A piezo-driven millimeter-wave tuning mechanism is designed to compensate for the fabrication and assembly tolerances and reduces the complexity of the manufacturing process.
As the field of terahertz (THz) photonics advances, we present a monolithic gallium arsenide (GaAs) disk-shaped whispering gallery mode resonator that has potential as a component in THz nonlinear optics. GaAs is a material with significant optical nonlinearity which can be enhanced when the crystal is shaped into a microdisk resonator. A 4-mm-disk-resonator was fabricated using single-point diamond turning and was characterized to obtain a quality (Q) factor of 2.21k at ∼150 GHz and 1.41k at ∼300 GHz. We also demonstrated the blue-shifting of up to ∼0.3 GHz of the THz modes using a block of metal. This post-fabrication degree of freedom could be useful for phase-matching requirements for nonlinear optical processes, such as detection based on optical up-conversion of THz radiation. This proof-of-concept demonstration can pave the way for the implementation of a compact, tunable and efficient device which could be integrated into nonlinear photonic platforms for THz generation, manipulation and detection.
Second-order nonlinear optical processes allow the conversion of electromagnetic signals to a higher frequency domain. Such so-called "upconversion" processes have been of interest for the optical detection of terahertz signals for decades. To enhance the nonlinear interaction, many investigations have focused on using high quality resonators, which improve the upconversion efficiency but limit the bandwidth. Here, we present a hybrid scheme that takes advantage of the high optical quality of a crystalline resonator while allowing the upconversion of signals at multiple frequency bands. We observed upconversion of six THz channels with MHz bandwidth, centered around 0.157 THz, and separated by about 10 GHz. The highest photon conversion efficiency at 0.157 THz was observed to be 3 × 10−6 per milliWatt of optical pump power. By numerically analyzing the landscape of nonlinear coupling in such resonators, we establish the conditions under which the demonstrated scheme can serve as an efficient multi-channel upconverter.