Ordinary differential equations are the mathematical formulation for a great variety of problems in science and engineering, and frequently, two different problems are equivalent from a mathematical point of view when they are formulated by the same equations. Students acquire the knowledge of how to solve these equations (at least some types of them) using protocols and strict algorithms of mathematical calculation without thinking about the meaning of the equation. The aim of this work is that students learn to design network models or circuits in this way; with simple knowledge of them, students can establish the association of electric circuits and differential equations and their equivalences, from a formal point of view, that allows them to associate knowledge of two disciplines and promote the use of this interdisciplinary approach to address complex problems. Therefore, they learn to use a multidisciplinary tool that allows them to solve these kinds of equations, even students of first course of engineering, whatever the order, grade or type of non-linearity. This methodology has been implemented in numerous final degree projects in engineering and science, e.g., chemical engineering, building engineering, industrial engineering, mechanical engineering, architecture, etc. Applications are presented to illustrate the subject of this manuscript.

Classical dimensional analysis and nondimensionalization are assumed to be two similar approaches in the search for dimensionless groups. Both techniques, simplify the study of many problems. The first approach does not need to know the mathematical model, being sufficient a deep understanding of the physical phenomenon involved, while the second one begins with the governing equations and reduces them to their dimensionless form by simple mathematical manipulations. In this work, a formal protocol is proposed for applying the nondimensionalization process to ordinary differential equations, linear or not, leading to dimensionless normalized equations from which the resulting dimensionless groups have two inherent properties: In one hand, they are physically interpreted as balances between counteracting quantities in the problem, and on the other hand, they are of the order of magnitude unity. The solutions provided by nondimensionalization are more precise in every case than those from dimensional analysis, as it is illustrated by the applications studied in this work.

The normalization of dimensionless groups that rule the system of nonlinear coupled ordinary differential equations defined by the Lotka–Volterra biological or chemical oscillator has been derived in this work by applying a normalized nondimensionalization protocol. The normalization procedure, which is quite accurate, does not require complex mathematical steps; however, a deep physical understanding of the problem is required to choose the appropriate references to define the dimensionless variables. From the dimensionless groups derived, the functional dependences of some unknowns of interest are established. Due to the coupled nature of the problem that induces temporal concentration rates of each species that are quite different at each point of the phase diagram, this diagram has been divided into four stretches corresponding to the four quadrants. For each stretch, the limit values (maximum or minimum) of the variables, as well as their duration, are expressed in terms of the dimensionless groups derived before. Finally, to check all the mentioned dependences, a numerical simulation has been carried out.

In this article, a mathematical model capable of simulating the heat transfer of cylindrical vessels whose properties are dependent on temperature is proposed. As a case study, it compares, from an approach of their heat transfer and chemical migration characteristics as a function of the temperature reached, different materials commonly used for the manufacture of water bottles. More specifically, the materials studied were aluminium, polyethylene terephthalate, and polypropylene. The validation of the model consists of an experiment carried out in the laboratory with three water bottles of each of the materials under study, as well as simulations using the Network Simulation Method to recreate the heat transfer that occurs through the walls of the bottles. On the other hand, the nondimensionalization technique is also applied, which allows us to obtain the weight of each of the variables on the problem, as well as the existing relationship between them. Finally, an outside temperature of 30 °C to 50 °C is simulated, which is a common temperature range in southern Europe during the summer season, and an initial temperature of 20 °C for the water contained in the bottle to know the behaviour of the materials and what the final temperature of the water would be after one hour.

Whole-body vibrations have several harmful effects on the population's health. The most suitable way to characterize the vibrations is to use the daily vibration exposure A (8) and Vibration Dose Value as specified in Directive 2002/44/EC. Therefore, based on the existing literature, we propose Probit equations that allow us to relate the population percentage affected by the vibration effects (low-back pain, sciatica, and herniated disc) with the A (8) and the Vibration Dose Value. It is worth noting that there is a good correlation between the experimental data and the expressions obtained, especially for low-back pain and herniated discs. Once the expressions have been validated, we analyze the limit values given in the aforementioned legislation, showing that the percentage of the affected population is significant for them. Therefore, this study also proposes new limits based on their own definitions, which are more in line with the results shown in the bibliography.