We have proposed an impact assessment methodology for determining sustainability in energy-intensive industrial production based on a comprehensive combination of economic, environmental, and social indicators for sustainable development. The goal of this study was to disclose this methodology for assessing sustainability in energy-intensive industrial production. We proved that any energy-intensive chemical, metallurgical, and energy generation processes should maximize the material output values and product value addition to ensure innovative sustainable development. We proposed indicators that determine the levels of increasing the sustainability of energy-intensive production as a whole, as well as taking into account individual technological processes. We proposed a procedure for making managerial decisions to increase the sustainability of energy-intensive outputs using the technological renewal of fixed assets and/or technological modernization of production. Our proposed methodology is based on a graphical model of the technological development’s life cycle of the existing energy-intensive production process. In addition, the proposed methodology ensures resource- and energy-efficiency intensification, together with the environmental safety of the technological processes.

Hazard evaluation of different heavy metal exposure on the crops cultivated around two abandoned metal mine sites was conducted. Bioconcentration Factor (BCF) of nine heavy metals including Cu, Cd, Hg, As, Cr, Zn, Pb, Mn, and Al in the samples of brown rice cultivated at exposed soil were measured. Soil-plant BCF was measured and compared with Korean and US EPA standards. BCF values of analyzed heavy metals except Hg and As were below the limits. BCF of Hg was over 5 times higher than the standard limit. Excess cancer risk (ECR) and hazard quotient (HQ) values of As was higher than the limit and suggested to have carcinogenic as well as non-carcinogenic threat to the public exposed to the sites. The data presented could be utilized in prioritizing abandoned metal mine sites for health effect survey.

We present the experimental results of an optimal recycling method for waste carbon fibre reinforced plastics (CFRPs) that is based on the application of a set of unit mechanochemical processes. The objectives of this study were to highlight the influence of process factors that are inherent in the chemical recycling process of waste CFRP. We investigated the influence of the soaking period, the application of a catalyst and impurities on the recycling process and recovery efficiency of the waste CFRP. Different combinations of the unit mechanochemical processes were investigated, and the effectiveness of the combination was analysed. The chemical recycling process was conducted using benzyl alcohol under ordinary pressure at initial solvent temperatures lower/equivalent to its flash point temperature. Experimental results showed that the solvent temperature increased up to boiling temperature levels when the mechanochemical process was initiated, thereby enhancing the mechanochemical process. The presence of impurities did not influence the recovery rate. Likewise, this experimental study highlighted the importance of accounting for the soaking period during the chemical recycling process: an extended soaking period resulted in a higher recovery rate, a lower portion of undissolved solids and recovered fibres of better quality. This research highlighted the significance of choosing the proper combination for the chemical recycling process as well as the benefits of recycling the waste CFRP with negligible application of the catalyst.

We propose a complex sealing compound for increasing the efficiency of shutoff operations based on natural materials processing for materials such as sand, peat, rice, and husks. We studied the influence of mechanical activation processes on the mechanical and rheological properties of the developed sealants. Through mechanochemical activation, sand dissolution in a low-concentrated alkali solution was possible, and gelling the resulting sodium silicate while reinforcing it with undissolved sand particles to obtain a sealant composition. We used this approach to produce a hybrid sealing compound based on activated rice husks with up to 20% biogenic silicon dioxide combined with mechanically activated peat: the maximum shear strain of the hybrid sealant was 27.7 ± 1.7 Pa. We produced hydrogels based on sodium silicate, polyacrylamide, and chromium acetate, reinforced with mechanically activated rice husks. We studied the sealants’ rheological and filtration properties and observed the respective viscoplastic and viscoelastic properties. An increase in the dispersion concentration from 0 to 0.5% increased the maximum strain value of undestroyed hydrogel’s structure in the range 50–91 Pa and the maximum shear strain from 104 to 128 Pa. The high residual resistance factor values of the ideal fracture model make the natural and plant-renewable raw materials very promising for repair and sealing work.