Marco Carlo Rampini

Dr. Marco Carlo Rampini

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Marco Carlo RampiniMarco Carlo Rampini
Marco Carlo Rampini
GZGiulio Zani
Giulio Zani
MCMatteo Colombo
Matteo Colombo
MPMarco di Prisco
Marco di Prisco
Textile reinforced concrete (TRC) is a promising high-performance material that has been employed with success in new constructions, as well as a strengthening layer of existing structural components. In this work, we document the optimisation procedure of textile-based composites for new construction and for the seismic retrofitting of under-reinforced concrete elements and masonry buildings. The study, aimed at maximising the material performances avoiding waste of economic resources, was addressed by means of a series of uniaxial tensile tests conducted on a wide set of alkali-resistant (AR) glass fabrics and TRCs. The samples differed in terms of cement-based matrices, embedded textiles and addition of dispersed microfibers. The results highlight the effects of fabric characteristics and introduction of short fibres on the mechanical behaviour, proposing novel comparison parameters based upon the load bearing capacity and the deformation response of the composites. The application of simplified analytical models borrowed from the literature finally revealed the limitations of the available predictive approaches, suggesting future lines of investigation.

13 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Lucas Caon MenegattiLucas Caon Menegatti
Lucas Caon Menegatti
LFLeticia Ikeda Castrillon Fernandez
Leticia Ikeda Castrillon Fernandez
Lucas Rosse CaldasLucas Rosse Caldas
Lucas Rosse Caldas
Marco PepeMarco Pepe
Marco Pepe
Francesco PittauFrancesco Pittau
Francesco Pittau
Enzo MartinelliEnzo Martinelli
Enzo Martinelli
The construction sector is one of the most energy-intensive and raw-material-demanding human activities and, hence, contributes a significant share of greenhouse gas emissions. As a matter of principle, making the construction sector “greener” is one of the main challenges for policy makers, private companies and the scientific community. For this reason, one of the most promising actions is based on recycling Construction and Demolition Waste (CDW) and converting them into secondary raw materials for the construction sector itself. Moreover, the reduction of the environmental impact can be further amplified through the optimization of the production, assembly and deconstruction/reuse procedures and through the maximization of the service life. In this aim, the present work aims at analyzing the environmental performance of duly sized and designed prefabricated Decontructable and Reusable Beam (DRB) incorporating with Recycled Concrete Aggregates (RCA) assembled by means of an innovative system based on a memory®-steel prestressing technique. The environmental performance is evaluated through Life Cycle Assessment with a cradle-to-gate approach: the analysis of 16 midpoint impact categories was conducted using the methodology proposed by EN15804. In this context, three allocation scenarios for avoided impacts due to reuse (100-0, 50:50 and 0-100) were considered, and a sensitivity analysis was performed. It was verified that due to the higher amount of post-tensioning required for the innovative shape memory alloy steel bars, the DRBs present inferior environmental performance than the Ordinary Beams (ORB). However, when analyzing the reuse scenarios, it was observed that the DRB could have considerably lower impacts, depending on the type of allocation procedure adopted in LCA modeling. This study brings as the main contribution an evaluation and some design guidelines for the development of circular concrete structures based on the principles of Design for Deconstruction (DfD) and the prefabricated process.

20 March 2023 in Structural Concrete
Verified
Journal Article
Open access
KFKatherina Flores Ferreira
Katherina Flores Ferreira
Marco Carlo RampiniMarco Carlo Rampini
Marco Carlo Rampini
GZGiulio Zani
Giulio Zani
MCMatteo Colombo
Matteo Colombo
MPMarco di Prisco
Marco di Prisco
The structural performance and durability of reinforced concrete (RC) dapped‐end beams may be significantly threated by the effects of deterioration and environmental actions, compromising the structural robustness of important infrastructures such as bridges. The study of the critical role of dapped‐ends has grown in recent years, focusing in particular on the implementation of innovative retrofit solutions capable of extending the service life of these structural elements. In this paper, an experimental investigation on the contribution of Fabric‐Reinforced Cementitious Matrix (FRCM) retrofitting system to the load bearing capacity of RC dapped‐end beams is presented. A set of eight full‐scale dapped‐ends was subjected to monotonic loading tests. The presence of cracks prior to the application of the retrofitting composite, which may represent the actual state of conservation of existing RC half‐joints subjected to heavy traffic loads, is reproduced by testing the specimens up to the reaching of the ultimate design load. Different orientations of the alkali‐resistant glass fabric composing the FRCM system were tested, and the results allow to discuss the effectiveness of the retrofitting solution.

23 January 2025 in Structural Concrete
Verified
Journal Article
Open access
KFKatherina Flores Ferreira
Katherina Flores Ferreira
Marco Carlo RampiniMarco Carlo Rampini
Marco Carlo Rampini
beatrice bellettibeatrice belletti
beatrice belletti
BCBiagio Calcavecchia
Biagio Calcavecchia
GCGuido Camata
Guido Camata
MPMarco di Prisco
Marco di Prisco
Half‐joints in reinforced concrete girder bridges are generally considered critical elements, susceptible to degradation and potentially impacting the overall structural behavior. An Italian project carried out by ReLUIS interuniversity consortium addresses theoretical, numerical, and experimental studies on critical aspects of existing road bridges. One task is aimed at investigating existing half‐joints. The paper offers a comprehensive assessment of finite element numerical simulations applied to a reinforced concrete dapped‐end beam through an Italian benchmark study. Leveraging recent experimental campaign data as a reference, the study conducts partially blind numerical simulations. The benchmark procedure follows a systematic approach across three subsequent phases. Emphasizing the comparison between experimental data and numerical simulations, the paper introduces discrete and continuous error indicators to gauge numerical prediction efficacy across phases. Global synthetic indices are proposed to measure performance at serviceability and ultimate limit states. The discussion section integrates insights from eight research units, presenting a comprehensive analysis of simulation outcomes. Conclusive remarks outline implications and potential research directions in the realm of reinforced concrete dapped‐end girder bridges.

14 September 2021 in Textiles
Verified
Journal Article
Open access
PDF file
Marco Carlo RampiniMarco Carlo Rampini
Marco Carlo Rampini
GZGiulio Zani
Giulio Zani
LSLouis Schouler
Louis Schouler
MCMatteo Colombo
Matteo Colombo
MPMarco di Prisco
Marco di Prisco
Alkali-resistant (AR) glass textiles are used as the main reinforcement in several composite applications due to their good performance-to-cost ratio. A huge variety of textiles are already present in the market; they differ on various parameters, such as, for example, the filaments’ diameters, the geometry, the type of weaving, or the nature of the impregnation coating. To orient manufacturers towards the production of efficient textiles, the most important aspect is the balance between cost and performance. In this paper, a series of different fabrics designed for textile-reinforced cementitious composites were considered. Performance was assessed by means of uniaxial tensile tests and the results are presented in terms of load vs. displacement. Then, the selected AR-glass textiles were compared in terms of fabric efficiency, targeting the effect of each parameter on the textile capacity. The research here presented is part of a comprehensive campaign aimed at the optimization of glass-fabric-reinforced cementitious composites for structural retrofitting. To better discuss the different solutions tested, at the end, only considering a small number of the investigated textiles, an efficiency evaluation was carried out at the cementitious composite level.

1 February 2023 in Journal of Composites for Construction
Verified
Journal Article
Closed access
PDF file
Marco Carlo RampiniMarco Carlo Rampini
Marco Carlo Rampini
GZGiulio Zani
Giulio Zani
MCMatteo Colombo
Matteo Colombo
MPMarco di Prisco
Marco di Prisco
Textile-reinforced mortar (TRM) has proved to be a valid engineering material for the upgrading and retrofitting of existing masonry and concrete structures subject to seismic actions, because it can be applied in thin layers that can increase load-bearing capacity while providing significant durability. However, characterization activities at the composite scale have mainly focused on the material’s monotonic behavior and few studies have so far addressed the material’s performance in the presence of cyclic actions. In this work, we set ourselves the goal of investigating the uniaxial tensile behavior of a series of cement-based matrix composites reinforced with alkali-resistant (AR) glass fabrics, also considering the possible inclusion of short dispersed polyvinyl alcohol (PVA) fibers. Quantification of the stiffness degradation accumulated by the composites during unloading–reloading cycles allowed us to evaluate the damage evolution in uniaxial tension through data interpolation, providing analytical formulations that may represent a benchmark for the validation of advanced nonlinear simulations.