In this paper, ultra-thin narrow-band, complementary narrow-band, and dual-band metamaterial absorbers (MMAs), exploiting the same electric ring resonator configuration, are investigated at normal and oblique incidence for both transverse electric (TE) and transverse magnetic (TM) polarizations, and with different physical properties in the THz regime. In the analysis of the ultra-thin narrow-band MMA, the limit of applicability of the transmission line model has been overcome with the introduction of a capacitance which considers the z component of the electric field. These absorbing structures have shown a wide angular response and a polarization-insensitive behavior due to the introduction of a conducting ground plane and to the four-fold rotational symmetry of the resonant elements around the propagation axis. We have adopted a retrieval procedure to extract the effective electromagnetic parameters of the proposed MMAs and we have compared the simulated and analytical results through the interference theory.
This paper reports the design, the microfabrication and the experimental characterization of an ultra-thin narrow-band metamaterial absorber at terahertz frequencies. The metamaterial device is composed of a highly flexible polyimide spacer included between a top electric ring resonator with a four-fold rotational symmetry and a bottom ground plane that avoids misalignment problems. Its performance has been experimentally demonstrated by a custom polarization-maintaining reflection-mode terahertz time-domain spectroscopy system properly designed in order to reach a collimated configuration of the terahertz beam. The dependence of the spectral characteristics of this metamaterial absorber has been evaluated on the azimuthal angle under oblique incidence. The obtained absorbance levels are comprised between 67% and 74% at 1.092 THz and the polarization insensitivity has been verified in transverse electric polarization. This offers potential prospects in terahertz imaging, in terahertz stealth technology, in substance identification, and in non-planar applications. The proposed compact experimental set-up can be applied to investigate arbitrary polarization-sensitive terahertz devices under oblique incidence, allowing for a wide reproducibility of the measurements.
The analysis of the transmission and reflection spectra of stacked slot-based 2D periodic structures of arbitrary geometry and the ability to devise and control their electromagnetic responses have been a matter of extensive research for many decades. The purpose of this paper is to develop an equivalent Π circuit model based on the transmission-line theory and Floquet harmonic interactions, for broadband and short longitudinal period analysis. The proposed circuit model overcomes the limits of identical and symmetrical configurations imposed by the even/odd excitation approach, exploiting both the circuit topology of a single 2D periodic array of apertures and the ABCD matrix formalism. The transmission spectra obtained through the equivalent-circuit model have been validated by comparison with full-wave simulations carried out with a finite-element commercial electromagnetic solver. This allowed for a physical insight into the spectral and angular responses of multilayer devices with arbitrary aperture shapes, guaranteeing a noticeable saving of computational resources.
11 July 2021 in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
This paper describes PWLFIT+, an extension to the frequency domain of PWLFIT, a new paradigm in time‐domain macromodeling for linear multiport systems, based on a piecewise‐linear (PWL) behavioral representation of the S‐parameters step response. While the impulse response of each S‐parameter is approximated as sum of delayed rectangles (rect) functions, its spectrum is interpolated as sum of the corresponding delayed cardinal sine (sinc) functions. Exploiting this correspondence, the model building is performed by an iterative procedure where the PWL macromodels can be determined in order to meet defined accuracy goals on the spectrum. At runtime, waves at macromodels ports are calculated using the Segment Fast Convolution (SFC) algorithm within the Digital Wave Simulator (DWS) framework. The proposed method is characterized by its simplicity, stability, speed and scalability, all features that are emphasized when it is used in the DWS framework. After an analysis of the excellent numerical features of SFC in the Z‐domain, clearly differentiated with respect conventional macromodeling methods based on poles and residues, two suitable application examples are presented to demonstrate the unique features of PWLFIT+.
4 April 2017 in Journal of Electromagnetic Waves and Applications
In this paper, we propose an ultra-thin broad-band metamaterial absorber composed of a periodic array of three-layered electric ring resonators (ERRs) within a dielectric spacer and backed by a metallic ground plane for THz applications. The overlapping of the resonance peaks relevant to the ERRs leads to a broad spectral absorption bandwidth over a wide range of incidence angles under both transverse electric and transverse magnetic polarizations. We analyze the effect of different physical properties on the absorption spectra in order to estimate the dielectric and Ohmic losses in the metamaterial structure. In addition, the Nicolson, Ross, and Weir algorithm is adopted as homogenization technique to retrieve the effective electromagnetic parameters, while the interference theory is employed to compare the simulated and analytical results for the multi-layered absorber.