Dynamic inductive power transfer (DIPT) can enable dynamic wireless charging for urban micromobility, but deployment is constrained by electromagnetic field (EMF) exposure compliance and by lateral and angular misalignment typical of two-wheeled vehicles. This review consolidates the state of the art and links these constraints to smart grid control and charging optimisation. It frames dynamic charging lanes as corridor infrastructure that behaves as a distributed electrical load whose demand depends on traffic and availability, with segmentation control as a key lever for controllability. It then synthesises practical system architectures that combine power electronics, segmented transmitters, sensing, communication, and supervisory control, because these interfaces determine which degrees of freedom are available to shape demand in space and time. The review also summarises coupler, shielding, and compensation choices that jointly determine efficiency, misalignment robustness, and EMF leakage. Finally, it surveys scheduling methods that incorporate network limits, output from distributed energy resources, and uncertainty through rolling horizon, robust, and risk-constrained formulations. The synthesis supports deployment aligned with renewable integration and sustainable urban mobility, and it highlights open needs in forecasting robustness, scalable optimisation, and secure interoperability.
This work investigates the geometric design and optimisation of a dynamic inductive power transfer coupler for two-wheeled electric vehicles under misalignment and magnetic-field exposure constraints. A computational three-dimensional finite-element model of a shielded rectangular coupler is developed to characterise coupling coefficients and magnetic flux density levels on control planes along the longitudinal travel range and under lateral and angular misalignments. Two simulation datasets are generated: one varying only geometric parameters at a nominal position for surrogate construction and global sensitivity analysis, and a second jointly sampling geometry, the travel range and misalignments for optimisation. Sparse Polynomial Chaos Expansions and Canonical Low-Rank Approximation surrogates are built to quantify Sobol’ indices, revealing that a small subset of primary-side geometric variables dominates both coupling efficiency and magnetic field levels. Random forest regressors are then trained on the extended dataset and embedded in the Non-dominated Sorting Genetic Algorithm II to solve a multi-objective optimisation problem that maximises worst-case coupling, improves robustness to misalignment, and enforces magnetic-field leakage limits. Optimal designs were obtained, and a subset was selected for re-evaluation using the finite-element method. The results confirm that the proposed surrogate-assisted framework yields coupler geometries with enhanced coupling and reduced magnetic field leakage while respecting the mechanical constraints for the electric motorcycle system.
High-strength aluminium alloys are widely used in aerospace and automotive structures, where fatigue assessments incorporating cyclic plasticity effects are often performed using strain–life approaches. The description of such effects requires advanced plasticity models capable of capturing the cyclic response and predicting damage accumulation. Nevertheless, detailed investigations into the interactions among cyclic plasticity, damage mechanisms and fatigue life prediction under variable-amplitude loading remain challenging due to limited data. Thus, this study investigates the cyclic elasto-plastic behaviour and life prediction of 7075-T651 aluminium alloy under variable-amplitude strain-controlled conditions. An Armstrong–Frederick kinematic hardening model was developed to capture the cyclic elasto-plastic response and replicate the stabilised hysteresis loops, while electron backscatter diffraction and scanning electron microscopy analyses were conducted to understand micro-structural evolution induced by cyclic loading and identify the main micro-mechanisms associated with the applied strain levels. The analysis of the results indicates that the tested alloy exhibited mixed cyclic hardening–softening behaviour, dependent on strain amplitude, and was relatively close to a Masing-type material. The cyclic stress–strain response and the associated fatigue life relationships under constant-amplitude loading, expressed via Basquin–Coffin–Manson (BCM) and Smith–Watson–Topper (SWT) parameters, showed good agreement with the literature results. Fatigue life predictions under variable-amplitude loading were successfully performed using either the BCM or SWT model, each combined with a linear damage accumulation rule. In addition, dislocations were largely confined to grain boundaries in the as-received material, whereas under fatigue loading they extended into grain interiors as well as along the boundaries, accompanied by a significant increase in the geometrically necessary dislocation density.