Purpose – The purpose of this paper is to determine the instantaneous contact area in a gearbox using rapid prototyping. Design/methodology/approach – The determination of the contact area utilizes one of the RP techniques, i.e. stereolithography. Stereolithography enables the making of gears with complex profiles, which are difficult to obtain by means of other machining methods. A model of a bevel gearbox with Gleason spiral generated modify roll (Gleason SGM) gears with circular-arc profiles of teeth is applied as an example for testing. A prototype of the gearbox was made using SLA 250 apparatus. Findings – Correct mating of gears and their kinematical precision depend on the shape and size of the instantaneous contact area, as well as changes during the turning of gears. Contact between gear surfaces of a geometrically ideal gearbox occurs at a point or line, but, because of a deformability of mating flanks teeth, in reality it is always a certain surface. This paper presents research on the instantaneous contact area with area on the surface of a flank tooth, which is in contact with the mating surface of another tooth at a specific moment. Originality/value – The described method in the paper enables a dynamic determination of the mating area gearbox. Existing experimental methods enable only a static observation of the mating area. A stand test was built and enables an exact meshing of mating gears. Gears were made of transparent material, SL-5170, which enables observation of the instantaneous contact area.
In the article research related to the increasing in the scope of application of additive technologies in the construction of machines for the production of gears with involute and sinusoidal profile from polymeric materials was presented. The designed original research stand and with its use carried out a series of preliminary fatigue tests of the obtained polymer gears with an involute and sinusoidal profile was show. The tested gears were obtained in the technology of rapid prototyping by the FFF (Fused Filament Fabrication) method from polymer composites obtained in the form of an ABS (acrylonitrile/butadiene/styrene) – based filament. Based on the results obtained, it was noticed that the temperature in the meshing zone of the gears with involute profiles is higher than for sinusoidal profiles, regardless of the type of composite from which the gears were made. It should also be noted that in the range of nominal load, the sound intensity level of the meshing zone is also lower for gears with a sinusoidal profile than for gears with an involute profile. Based on the tests carried out, an increase in sound intensity was noticed in the case of gears obtained from selected composites (Table 2) compared to the gear obtained from unfilled ABS. However, in the case of gears obtained from the tested composite materials, we observe a decrease in the gear operating temperature (Table 2). The most favorable results of these tests were obtained for gears with a sinusoidal profile obtained from ABS + P2 composite, which show the lowest operating temperature of the gear. It should also be mentioned that slightly worse results were obtained for involute gears.
9 March 2021 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
This study describes the methodology for modelling a worm and worm wheel of a double enveloping worm gear with the use of a CAD system. An algorithm for generating a globoid helix is described. In addition, the methodology for modelling an hourglass worm thread with a straight axial tooth profile is presented. The shape of the hourglass worm tooth end with and without a trace modification is proposed. Moreover, a method for achieving a geometric modification of the tooth trace was developed. Next, the method for modelling the worm wheel teeth is described. A solid model of using a machining worm as a hob is applied. Owing to the limitations of a CAD system, which prevents the use of a direct machining simulation, an indirect modelling method is introduced. In the present study, different CAD techniques, both solid and surface, are applied. Knowledge of the correct modelling of the hourglass worm and worm wheel facilitates their generation and conducting various analyses, including a tooth contact analysis. CAD models are utilised to analyse the geometrical contact pattern in a CAD environment, to carry out FEM analysis, to manufacture real parts or to prototype models using the technique of rapid prototyping. They can be also used as master models for measurement, e.g. in optical technics.
The contact pattern between gear teeth is one of the most significant indicators of proper gear operation. This paper presents an analysis of the contact pattern of gears with a sinusoidal profile. The gear geometry was obtained through direct solid simulation of the machining process. Generally, analytical, numerical, and experimental methods are used for contact pattern analysis in gearboxes. This article presents contact pattern investigations using numerical methods and a novel experimental method that utilizes pressure measurement films. A proprietary program using image analysis was used for the contact pattern analysis. The numerical studies utilized the Finite Element Method (FEM) and the CAD method. The results obtained from the presented methods show good convergence.
This article presents the results of research focused on increasing the durability of gears manufactured using FFF (Fused Filament Fabrication) technology from ABS material. The gears underwent a thermal surface treatment involving the application of a hot air stream. During this thermal treatment, the gears rotated around their axis of rotation. This rotation prevented gravity-induced deformations that could otherwise occur during such processing. Comparative durability tests of the gears showed greater longevity for the thermally treated gears compared to those that were not modified.
This paper presents a comprehensive analysis of contact patterns in globoid worm gears with rectilinear axial tooth profiles. Two distinct methods are employed: a CAD-based simulation, and experimental techniques including two-sheet pressure measurement films. The CAD-based method for determining the contact pattern can be successfully applied to evaluate the form, size, and position of the contact pattern. Experimental results qualitatively confirm the theoretical predictions, although measured contact areas tend to be smaller due to incomplete filling and fabrication inaccuracies. The developed models offer reliable tools for evaluating tooth contact in worm gear design, potentially reducing prototyping costs. The proposed methods establish a solid foundation for further research and improvement of contact performance in double-enveloping worm gear systems.