Aiming to increase the scarce information available on the kinetics of cellulose dissolution, we have applied an image-assisted technique based on the luminance evolution as cellulose dissolves to study this process under different experimental conditions. This protocol was validated via direct determination of the cellulose dissolved. In all cases datapoints were linearly fitted assuming a pseudo-zero order reaction which facilitates the comparison between datasets. To study the solvent effect we have used three ionic liquids with large basicity and found significantly different rates of dissolution, from faster to slower: [C $$_2$$ C $$_1$$ Im][OAc]>[C $$_1$$ C $$_1$$ Im][DMP]>[C $$_2$$ C $$_1$$ Im][DEP]. Solvatochromic parameters and viscosity of the solvent media were determined and the latter was identified as a key factor slowing the process as it reduces ionic mobility. The weight of viscosity was estimated by removing the viscosity effect with a tuned solvent media doped with DMSO. Activation energy was 70% lower at constant viscosity. On the substrate side, particle size is the main factor affecting the dissolution rate. All samples were milled to homogenise the starting material and minimise the distortions caused by the size distribution. After, dissolution of three cellulose substrates under the same experimental conditions was analysed. Dissolution of natural fibers took twice as long as dissolving pulp which dissolves slower than lyocell fibers. This trend correlates with the roughness of the samples obtained by optical perfilometry which is consistent with the dissolution mechanism proposed in the literature. Graphical abstract
Resulting properties of cotton and polyester blends make polycotton the most common fabric in textile industry. Separation technologies are key for the chemical processing of the massive amount of polycotton waste produced worldwide. The very different chemical nature of cellulose and polyethylene terephthalate determines the fractionation strategies to obtain two valuable monomaterial streams. In this work, we propose separation pathways seeking the conversion both polymers. First, polyester was depolymerised into its monomeric units through catalytic alkaline hydrolysis. The combined effect of alkali concentration and the catalyst was analysed to overcome the hydrophobic nature of polyester and optimise its conversion rate minimising the damaged caused to the cellulose chains. Conversion rates up to 80% were reached in a single separation stage with a limited effect of the polymer chain distribution of cellulose which remains a fiber-grade feedstock. Alternatively, cellulose was fully removed by selective dissolution in ionic solvent and subsequent filtration resulting in a spinnable mixture. Finally, enzymatic treatments for the conversion of cellulose into fermentable sugars were studied. Single stage conversions of 65% were achieved after maximizing the enzymatic activity. Structural and spectroscopic analysis showed that crystalline domains of textile-grade cotton limit the enzymatic activity. Optimal fractionation process is, in our view, highly context dependent what conveys to seek a variety of alternatives seeking for chemical processes driven by the ulterior up-cycling of the monomaterial streams