Inkjet printing technology is showing a disruptive potential for low-cost optical and electrochemical biosensors fabrication. This technology is becoming affordable for every laboratory, potentially allowing every research group to implement a biosensors fabrication platform with consumer inkjet printers, commercially available inks and smartphones for readout. In the present work we developed an example of such platform testing several inks, printers, and substrates. We defined and optimized the protocols assessing the printing limits and the fabricated biosensors electrochemical properties in standard solutions. Our platform has a total cost of less than 450 Euro and a single sensor fabrication cost of 0.026 Euro. Finally, we tested the sensitivity of smartphone-performed impedance measurements with printed biosensors surface coverage by Self Assembling Monolayers (SAM), validating them with standard instruments.
Bacteriophages are responsible for significant material and time losses in the dairy industry. This because these viruses infect the selected lactic starter cultures used for milk fermentation, i.e., the first stage toward cheese production. Standard detection techniques are time- and labor-consuming, causing huge costs related to production plant sanitation and product wasting. A new type of biosensor for early detection of bacteriophage contamination is highly demanded by the milk processing market, and inkjet-printed electrochemical sensors could be the answer. Inkjet printing is a well-known technology that has been revisited in recent years, using silver nanoparticle (AgNP) based inks for low-cost and easy fabrication of sensing and biosensing systems on flexible and eco-compatible substrates. In this research, we studied inkjet printing for the manufacturing of both interdigitated electrodes arrays (IDEAs), and a versatile system to monitor bacterial cultures by electrochemical impedance spectroscopy (EIS). In particular, we studied this biosensing system for the detection of bacteriophages by comparing its performance with standard microbiological methods. We performed electrical and morphological characterizations of the devices produced with a consumer-use inkjet printer with commercial AgNPs ink on flexible substrates, such as office paper, polyethylene (PET), and photo paper. We used light microscopy optical analysis, profilometry, atomic force microscopy (AFM), and scanning electron microscopy (SEM) imaging to define the objects resolution, their real dimensions, and thickness. We also investigated the devices’ conductivity and layout, by EIS measurements with a standard buffer solution, i.e., phosphate buffered saline (PBS). Finally, we tested our system by monitoring Lactococcus lactis cultures and bacteriophage infection. We compared the results to those obtained by two standard microbiological methods in terms of response time, proving that our technique requires less than half the time of other methods and no specialized personnel.
Innovative chips based on palladium thin films deposited on plastic substrates have been tested in the Kretschmann surface plasmon resonance (SPR) configuration. The new chips combine the advantages of a plastic support that is interesting and commercially appealing and the physical properties of palladium, showing inverted surface plasmon resonance (ISPR). The detection of DNA chains has been selected as the target of the experiment, since it can be applied to several medical early diagnostic tools, such as different biomarkers of cancers or cystic fibrosis. The results are encouraging for the use of palladium in SPR-based sensors of interest for both the advancement of biodevices and the development of hydrogen sensors.
1 November 2018 in Sensing and Bio-Sensing Research
This work deals with the development of a disposable electrochemical biosensor for the specific detection of short DNA sequences. The sensor is an amperometric transducer with three planar electrodes, comprising a working, a counter and a pseudo-reference electrode, all made of a gold layer over a polycarbonate substrate. For the development of the genosensor, the working electrode was modified using thiol-tethered 33-mer DNA probe by chemisorptions, in a concentration range from 0.1 mu M to 5 mu M. Immobilization of ssDNA on gold surface was monitored with electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) in Fe(CN)(6)(4-/3-) and Ruthenium(II)/(III) solutions. The time dependence of ssDNA probe immobilization was also studied. The hybridization detection is then compared with EIS and DPV measurement