meng he

Dr. meng he

Huazhong University of Science and Technology, Wuhan, Hubei, China
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
TCTinghai Cheng
Tinghai Cheng
meng hemeng he
meng he
HLHengyu Li
Hengyu Li
XLXiaohui Lu
Xiaohui Lu
HZHongwei Zhao
Hongwei Zhao
HGHaibo Gao
Haibo Gao
A trapezoid-type stick-slip piezoelectric linear actuator using a right circular flexure hinge mechanism was proposed, designed, fabricated, and tested with the aim of accomplishing linear driving based on stick-slip motion. The angle adjustment of the trapezoid beam was used for generating lateral motion on the driving foot of the flexure hinge mechanism. A method of tuning the lateral motion of the flexure hinge mechanism was discussed. Based on the finite-element method, a proper angle of the trapezoid beam was obtained. The analysis results proved that asymmetrical flexure hinge mechanism can increase static friction force in slow extension stage and decrease kinetic friction force in quick contraction stage by lateral motion of the driving foot. A prototype was fabricated and its experimental system was established. The mechanical output experiments showed that the prototype achieved maximum output velocity and load of 5.96 mm/s and 3 N at a voltage of 100 Vp - p and a frequency of 500 Hz, respectively.

14 February 2017 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
TCTinghai Cheng
Tinghai Cheng
HLHengyu Li
Hengyu Li
meng hemeng he
meng he
HZHongwei Zhao
Hongwei Zhao
XLXiaohui Lu
Xiaohui Lu
HGHaibo Gao
Haibo Gao
A resonant/off-resonant hybrid excitation of a piezoelectric stick–slip actuator is proposed in this paper. It is accomplished by a resonant sinusoidal friction regulation wave (RSFR-wave) and an off-resonant saw-tooth wave (ORST-wave). The RSFR-wave is applied to the rapid deformation stage of the ORST-wave. In this stage, the first-order longitudinal vibration mode of the stator can be obtained. By this longitudinal vibration mode, the kinetic friction between the slider and frictional rod is obviously decreased utilizing ultrasonic friction reduction. The backward displacement is remarkably restrained. The high velocity, large mass of load and smooth displacement are achieved. The operation principle of hybrid excitation was discussed in detail, and a prototype was simulated, designed, and fabricated. A series of experiments were carried out and the results indicate that the step efficiency under the saw-tooth excitation and resonant/off-resonant hybrid excitation can realize 36.9% and 91.2%, respectively. The output velocity is increased by 147.23% relative to saw-tooth excitation. The minimum input power and the minimum driving voltage are decreased by 89.56% and 58.33%, respectively. Besides, the maximum mass of load capacity is 2.88 times that of saw-tooth excitation. The driving capacity of the actuator is increased by 466.13%.

1 June 2021 in Composite Structures
Verified
Journal Article
Closed access
meng hemeng he
meng he
XZXiaopeng Zhang
Xiaopeng Zhang
LFLucas dos Santos Fernandez
Lucas dos Santos Fernandez
AMAlexandre Molter
Alexandre Molter
LXLiang Xia
Liang Xia
TSTielin Shi
Tielin Shi

8 July 2019 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
PDF file
QGQi Gao
Qi Gao
meng hemeng he
meng he
XLXiaohui Lu
Xiaohui Lu
CZChi Zhang
Chi Zhang
TCTinghai Cheng
Tinghai Cheng
This article presented a new type of stick-slip piezoelectric actuator based on an asymmetrical flexure hinge driving mechanism. The key of the driving mechanism was a four-bar mechanism with different minimum thicknesses of right-circle flexure hinges. Combined with a symmetrical indenter, the asymmetrical flexure hinge driving mechanism generated controllable tangential displacement by changing the locking force. Therefore, the simple structured stick-slip piezoelectric actuator achieved considerable improvements especially in output speed and efficiency. In order to obtain improved actuator properties, the minimum thicknesses of asymmetrical flexure hinge driving mechanism, the tangential and normal displacements of the indenter were analyzed and investigated by finite element method. A prototype was fabricated and experiment investigation of the actuator characteristics was presented. Testing results indicated that the actuator achieved the maximum velocity of 15.04 mm/s and its maximum load reached 440 g under a voltage of 100 Vp-p and a frequency of 490 Hz. The maximum efficiency of the actuator was 3.66% with a load of 280 g under a locking force of 5 N and the actuated velocity of 10.17 mm/s.

16 December 2016 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HLHengyu Li
Hengyu Li
LWLiang Wang
Liang Wang
TCTinghai Cheng
Tinghai Cheng
meng hemeng he
meng he
HZHongwei Zhao
Hongwei Zhao
HGHaibo Gao
Haibo Gao
A high-thrust screw-type piezoelectric ultrasonic motor with a three-wavelength exciting mode is proposed in this paper. The motor mainly includes a stator and a screw output shaft, and the stator is composed of twelve rectangular piezoelectric plates and a hollow metal elastomer with an internal thread. The stator can be excited to generate the combined micro ultrasonic vibration mode. With this ultrasonic vibration mode, a three-wavelength traveling wave can be synthesized. The three-wavelength traveling wave is used to drive the screw output shaft by means of the frictional force between the stator and the shaft. Rotary-linear motion can be achieved without any additional conversion mechanism. Large thrust output can be easily obtained using a three-wavelength exciting mode. The exciting mode is analyzed in detail. The prototype is designed, simulated, and fabricated. A series of experiments are carried out and the results indicate that the maximum output thrust is 50.8 N at an excitation frequency and peak-to-peak voltage of 28.9 kHz and 120 Vp-p, respectively. The maximum force density is 247.8 N/kg.

22 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
meng hemeng he
meng he
MHMu He
Mu He
XZXiaopeng Zhang
Xiaopeng Zhang
LXLiang Xia
Liang Xia
Energy harvesting devices made of piezoelectric material are highly anticipated energy sources for power wireless sensors. Tremendous efforts have been made to improve the performance of piezoelectric energy harvesters (PEHs). Noticeably, topology optimization has shown an attractive potential to design PEHs with enhanced energy conversion efficiency. In this work, an alternative yet more practical design objective was considered, where the open-circuit voltage of PEHs is enhanced by topologically optimizing the through-thickness piezoelectric material distribution of plate-type PEHs subjected to harmonic excitations. Compared to the conventional efficiency-enhanced designs, the open-circuit voltage of PEHs can be evidently enhanced by the proposed method while with negligible sacrifice on the energy conversion efficiency. Numerical investigations show that the voltage cancellation effect due to inconsistent voltage phases can be effectively ameliorated by optimally distributed piezoelectric materials.