Michael Beyrer

Prof. Michael Beyrer

University of Applied Sciences and Arts Western Switzerland, Delémont, Jura, Switzerland
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2020 in Food Research International
Verified
Journal Article
Open access
MPMaria Consuelo Pina-Perez
Maria Consuelo Pina-Perez
DMD. Martinet
D. Martinet
CPC. Palacios-Gorba
C. Palacios-Gorba
CEC. Ellert
C. Ellert
Michael BeyrerMichael Beyrer
Michael Beyrer
The present research work aims to elucidate kinetics and mechanisms of the inactivation of Bacillus subtilis spores by a surface micro-discharge (SMD) - cold atmospheric pressure plasma (CAPP). Regarding industrial applications, the inactivation of spores was also studied for a static layer of a biopolymer powder or film, with an air plasma and at ambient pressure. Close to 4 log10 cycles of inactivation of Bacillus subtilis spores were achieved when exposing spores on flat glass to the SMD-CAPP. This effect can be reached at a very low plasma power density of 5 mW/cm2 in 7 min exposure time. The maximum inactivation level of spores drops when treating corn-starch powder to 2.6 log10 cycles at 7 mW/cm2 plasma power density for 5 min and with a polymer load of 5 mg/cm2. Similar is true for films produced with hydroxymethyl cellulose (HMC). The inactivation efficacy can be tuned and is a function of applied surface energy (product of the plasma power density and the exposure time) and the polymer load. Plasma diagnostics reveal the fundamental importance of reactive nitrogen species (RNS) in the inactivation. Etching of spore hull is supposed to be triggered by the plasma density, while UV-C and UV-B radiation do not contribute directly and significantly to the inactivation effect at least in a biopolymer matrix. Fluidization of a fixed powder layer is supposed to overcome limitations of the inactivation efficacy by reducing the diffusion distance of active plasma species between the source and the sample. The combination of low plasma power density with short treatment time is supposed to reduce the risk of the formation of side-products from the matrix.

19 October 2023 in Foods
Verified
Journal Article
Open access
PDF file
ASAnimesh Singh Sengar
Animesh Singh Sengar
Michael BeyrerMichael Beyrer
Michael Beyrer
CMCiara McDonagh
Ciara McDonagh
UTUma Tiwari
Uma Tiwari
Shivani PathaniaShivani Pathania
Shivani Pathania
The market has observed a rapid increase in the demand for plant-based foods as an alternative to animal meat products. Technologies such as high-moisture extrusion (HME) have the potential to develop anisotropic structures using alternative protein ingredients. This article discusses the different possible mechanisms responsible for structure formation and the effect of extrusion process parameters and outlines the recent advances in the long cooling dies (LCDs) used for meat alternative development. The role of different protein ingredients and the impact of combining them with other biopolymers were also evaluated. The underlying mechanism behind anisotropic structure formation during HME is a synergistic effect, with substantial dependence on the source of ingredients and their processing background. Formulation including proteins derived from plants, insects, animals, and microalgae with other biopolymers could pave the way to develop structured meat alternatives and fill nutritional interstices. Dynamic or rotating annular gap cooling dies operating at freely controllable shear and static annular gap dies are recent developments and assist to produce layered or fibrous structures. The complex chemical sites created during the HME of plant protein favour flavour and colour retention. This paper summarises the recent information published in the scientific literature and patents, which could further help researchers to fill the present knowledge gaps.

18 April 2020 in Food and Bioprocess Technology
Verified
Journal Article
Open access
PDF file
Michael BeyrerMichael Beyrer
Michael Beyrer
ISIrina Smeu
Irina Smeu
DMDavid Martinet
David Martinet
AHAlan Howling
Alan Howling
MPMaria Consuelo Pina-Perez
Maria Consuelo Pina-Perez
CEChristoph Ellert
Christoph Ellert
Heat-resistant spores on a dry, heat- and water-sensitive food matrix are difficult to inactivate. Radioactive or X-ray exposure is allowed and accepted only for some selected commodities. Non-thermal atmospheric pressure plasma treatments could offer an efficient, fast, and chemical-free solution. The effectiveness of direct contact cold atmospheric plasma (CAP) generated by a dielectric barrier discharge (DBD) device and air as process gas was evaluated against spores of Bacillus spp., Geobacillus spp., and Penicillium spp. A maximum of 3 log10 cycles of inactivation was achieved for B. coagulans spores exposed for only 10 s at low surface energy of 0.18 W/cm2 determined directly at the electrodes. This corresponds to an initial decimal reduction time of D1 = 0.1 min. Spores of B. subtilis are the most resistant amongst the studied strains (D1 = 1.4 min). The determining parameter in the modeling of the inactivation curve is surface energy. Non-porous, native starch granules or shells from diatoms, a highly porous material, were also contaminated with spores and treated by DBD CAP. The inactivation level was significantly reduced by the presence of powders. Considering plasma diagnostics, it can be concluded that the spore shell is the primary and main target for a plasma-induced inactivation. The inactivation affect scales with surface energy and can be controlled directly via process time and/or discharge power.

15 May 2024 in Foods
Verified
Journal Article
Open access
PDF file
MQMaria Quevedo
Maria Quevedo
Michael BeyrerMichael Beyrer
Michael Beyrer
Research regarding meat analogues is mostly based on formulation and process development. Information concerning their safety, shelf life, and long-term nutritional and health effects is limited. This article reviews the existing literature and analyzes potential hazards introduced or modified throughout the processing chain of plant-based meat analogues via extrusion processing, encompassing nutritional, microbiological, chemical, and allergen aspects. It was found that the nutritional value of plant-based raw materials and proteins extracted thereof increases along the processing chain. However, the nutritional value of plant-based meat analogues is lower than that of e.g., animal-based products. Consequently, higher quantities of these products might be needed to achieve a nutritional profile similar to e.g., meat. This could lead to an increased ingestion of undigestible proteins and dietary fiber. Although dietary fibers are known to have many positive health benefits, they present a hazard since their consumption at high concentrations might lead to gastrointestinal reactions. Even though there is plenty of ongoing research on this topic, it is still not clear how the sole absorption of metabolites derived from plant-based products compared with animal-based products ultimately affects human health. Allergens were identified as a hazard since plant-based proteins can induce an allergic reaction, are known to have cross-reactivities with other allergens and cannot be eliminated during the processing of meat analogues. Microbiological hazards, especially the occurrence of spore- and non-spore-forming bacteria, do not represent a particular case if requirements and regulations are met. Lastly, it was concluded that there are still many unknown variables and open questions regarding potential hazards possibly present in meat analogues, including processing-related compounds such as n-nitrosamines, acrylamide, and heterocyclic aromatic amino acids.

25 May 2023 in Heliyon
Verified
Journal Article
Open access
SSSilvia J.E. Snel
Silvia J.E. Snel
MPMirela Pascu
Mirela Pascu
IBIgor Bodnár
Igor Bodnár
SAShane Avison
Shane Avison
AGAtze Jan Van Der Goot
Atze Jan Van Der Goot
Michael BeyrerMichael Beyrer
Michael Beyrer
The interaction between flavors and proteins results in a reduced headspace concentration of the flavor, affecting flavor perception. We analyzed the retention of a series of esters and ketones with different chain lengths (C4, C6, C8, and C10) by protein isolates of yellow pea, soy, fava bean, and chickpea, with whey as a reference. An increase in protein concentration led to a decrease in flavor compound in the headspace as measured with atmospheric pressure chemical ionization time-of-flight mass spectroscopy (APCI-TOF-MS). Flavor retention was described with a flavor-partitioning model. It was found that flavor retention could be well predicted with the octanol-water partitioning coefficient and by fitting the hydrophobic interaction parameter. Hydrophobic interactions were highest for chickpea, followed by pea, fava bean, whey, and soy. However, the obtained predictive model was less appropriate for methyl decanoate, possibly due to its solubility. The obtained models and fitted parameters are relevant when designing flavored products with high protein concentrations.

Verified
Journal Article
Open access
PDF file
KKKarin Kleigrewe
Karin Kleigrewe
MHMartina Haack
Martina Haack
MBMartine Baudin
Martine Baudin
TMThomas Ménabréaz
Thomas Ménabréaz
JCJulien Crovadore
Julien Crovadore
WBWolfram Brück
Wolfram Brück
Flaxseeds are typically consumed either as whole flaxseed, ground flaxseed, flaxseed oil, partially defatted flaxseed meal, or as a milk alternative. They are considered a rich source of vitamins, minerals, proteins and peptides, lipids, carbohydrates, lignans, and dietary fiber, which have shown hypolipidemic, antiatherogenic, anticholesterolemic, and anti-inflammatory property activity. Here, an in vitro batch culture model was used to investigate the influence of whole milled flaxseed and partially defatted milled flaxseed press cake on the gut microbiota and the liberation of flaxseed bioactives. Microbial communities were profiled using 16S rRNA gene-based high-throughput sequencing with targeted mass spectrometry measuring lignan, cyclolinopeptide, and bile acid content and HPLC for short-chain fatty acid profiles. Flaxseed supplementation decreased gut microbiota richness with Firmicutes, Proteobacteria, and Bacteroidetes becoming the predominant phyla. Secoisolariciresinol, enterodiol, and enterolactone were rapidly produced with acetic acid, butyric acid, and propionic acid being the predominant acids after 24 h of fermentation. The flaxseed press cake and whole flaxseed were equivalent in microbiota changes and functionality. However, press cake may be superior as a functional additive in a variety of foods in terms of consumer acceptance as it would be more resistant to oxidative changes.