Michael Lüdemann

Mr. Michael Lüdemann

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 December 2020 in Aerospace
Verified
Journal Article
Open access
PDF file
HKHagen Kellermann
Hagen Kellermann
MLMichael Lüdemann
Michael Lüdemann
MPMarkus Pohl
Markus Pohl
MHMirko Hornung
Mirko Hornung
Ram air–based thermal management systems (TMS) are investigated herein for the cooling of future hybrid-electric aircraft. The developed TMS model consists of all components required to estimate the impacts of mass, drag, and fuel burn on the aircraft, including heat exchangers, coldplates, ducts, pumps, and fans. To gain a better understanding of the TMS, one- and multi-dimensional system sensitivity analyses were conducted. The observations were used to aid with the numerical optimization of a ram air–based TMS towards the minimum fuel burn of a 180-passenger short-range partial-turboelectric aircraft with a power split of up to 30% electric power. The TMS was designed for the conditions at the top of the climb. For an aircraft with the maximum power split, the additional fuel burn caused by the TMS is 0.19%. Conditions occurring at a hot-day takeoff represent the most challenging off-design conditions for TMS. Steady-state cooling of all electric components with the designed TMS is possible during a hot-day takeoff if a small puller fan is utilized. Omitting the puller fan and instead oversizing the TMS is an alternative, but the fuel burn increase on aircraft level grows to 0.29%.

25 February 2022 in Journal of the Global Power and Propulsion Society
Verified
Journal Article
Open access
MPMarkus Pohl
Markus Pohl
JKJo Köhler
Jo Köhler
HKHagen Kellermann
Hagen Kellermann
MLMichael Lüdemann
Michael Lüdemann
DWDaniel Weintraub
Daniel Weintraub
MHMirko Hornung
Mirko Hornung
This paper presents a novel tool for the modeling of partial turboelectric propulsion systems together with a corresponding case study for a commercial single-aisle aircraft. In order to reduce the environmental impact of air traffic, radically new aircraft and propulsion concepts with a high market penetration are needed. Partial turboelectric propulsion systems seem to offer a promising option to achieve this. For the development of these propulsion systems, a preliminary design tool with a homogeneous and sufficiently high fidelity, both for turbomachinery and electric components, is needed. To address this, the authors of this publication have developed a tool based on the GasTurb software. The models developed, in particular for the electric components which together form the electric powertrain, are described here. In the case study, which demonstrates the coupling of the developed tool with an aircraft design environment, a conventional turboprop baseline aircraft is compared to a derived aircraft which features a partial turboelectric propulsion system with wingtip propellers. The latter are intended to reduce the induced drag, enabling a reduction of the aircraft's total shaft power demand compared to the conventional baseline aircraft. The comparison between the partial turboelectric aircraft and the baseline aircraft indicates that fuel reduction increases with power split. However, primarily increasing electric powertrain masses and a stagnating drag reduction result in lower additional fuel reductions for higher power splits. Despite these conclusions, the predicted induced drag reductions need further refinement as they were found to be optimistic. In summary, this publication presents a methodology and a set of physics-based component models for the preliminary design of partial turboelectric propulsion systems, so that the electric components can be investigated and optimized at the same high level of detail as the gas turbine.

28 June 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
BTBarlas Türkyilmaz
Barlas Türkyilmaz
MLMichael Lüdemann
Michael Lüdemann
Moritz Georg KolbMoritz Georg Kolb
Moritz Georg Kolb
ALAlexandros Lessis
Alexandros Lessis
When assessing new technologies at the overall aircraft level, it is crucial to establish an appropriate benchmark to evaluate the resulting performance of the final concept aircraft. This publication defines a short-to medium-range baseline aircraft for entry into service in 2035, which serves as a benchmark for the HOPE project. This aircraft is sized using the Bauhaus Luftfahrt Aircraft Design Environment (BLADE), and its engine model is derived using the in-house tool Aircraft Propulsion System Simulation (APSS). The top-level aircraft requirements and technology assumptions for the entire project timeline are also defined and used for the baseline aircraft. Compared to a state-of-the-art aircraft (entry into service in 2015), the baseline aircraft consumes 21.4% less block fuel during the design mission and 20.9% less block fuel during the typical mission, since its operating empty mass is reduced by 13.6%, its aerodynamic performance is improved by 8.5%, and it has 6.4% more efficient engines.

12 June 2026 in Aerospace
Verified
Journal Article
Open access
PDF file
FPFabian Nicoals Peter
Fabian Nicoals Peter
MEMarc Engelmann
Marc Engelmann
MFMeriem Fikry
Meriem Fikry
MLMichael Lüdemann
Michael Lüdemann
LMLeonard Moser
Leonard Moser
Andreas StrohmayerAndreas Strohmayer
Andreas Strohmayer
This paper presents an integrated assessment of liquid hydrogen as an aviation energy carrier, covering fuel production, aircraft performance, and fleet-level climate impacts. The results, based on the H2Avia research project, indicate substantial potential for reducing life-cycle global warming impacts compared to conventional kerosene. The analyses conducted for the interdisciplinary assessment are presented. The analysis shows that the use of liquid hydrogen eliminates CO2 emissions during fuel burn, resulting in a significant reduction in global warming potential compared to conventional kerosene, despite remaining upstream emissions from production and transport. The aircraft application cases and the applied technologies assessment scenario are described. The modeled technologies essential for the hydrogen aircraft are discussed, and exemplary values are given. Integrated overall aircraft performance results are given and discussed. At the aircraft level, hydrogen-based aircraft require an 8–18% increase in design mission block energy compared to a 2040 kerosene baseline yet still achieve a reduction in effective global warming potential of 55–86% comparing a representative pair route between Europe and North America (6730 km). An overview of the fleet modeling approach and the applied scenarios is given. For a scenario with energy cost and climate impact as equally weighted minimization goals, the global fleet analysis yields a global warming potential reduction of 60% compared to the non-liquid hydrogen baseline scenario. Overall, the results suggest that liquid hydrogen-powered aircraft can deliver significant mission- and fleet-level reductions in global warming potential and thus represent a promising pathway for achieving long-term aviation climate targets.

19 October 2026 in Aerospace
Verified
Journal Article
Open access
PDF file
ALAlexandros Lessis
Alexandros Lessis
MLMichael Lüdemann
Michael Lüdemann
MHMirko Hornung
Mirko Hornung
The present contribution evaluates the responses produced by several semi-empirical wing-mass-estimation methods based on a wide range of parameter variations on the wing of an Airbus A320ceo-class aircraft model. A common wing-parametrization method is established to ensure the appropriate comparison between the results of each method. Six semi-empirical methods are introduced and compared against reported trends and a published surrogate model of a physics-based wing-weight-estimation framework. The investigated methods produce a 7.0% to 34.5% error relative to reference aircraft data for the baseline case. Variations with increasing aspect ratio show that most methods exhibit non-linear trends of decreasing gradients, opposing those found in the literature and numerical models. Removing the inertia relief considerations associated with wing fuel storage yields mass penalties ranging from 3.8% to 11.4% across the interval of wing aspect ratios explored, broadly matching published results. Alterations to the wing reference area and the spanwise location of the centre of pressure yield nearly linear and proportional changes to the wing mass for all the methods analysed, whereas the sensitivity to the engine’s spanwise location is found to be nearly linear or non-linear, depending on the method’s level of detail. To address the identified limitations, one of the simplest of the methods considered is systematically modified by restructuring its geometric terms and introducing a fuel mass relief, and is then calibrated against one of the most detailed, recovering the gradients and dry-wing sensitivity of the latter. This work shows that the simple semi-empirical methods commonly employed during the conceptual and preliminary aircraft design phases cannot fully represent the behaviour of methods of higher fidelity. Thus, future aircraft design studies should adopt more detailed wing-mass-estimation methods or systematically adapt existing ones.