This paper is focused on the preparation of novel hybrid polymer composite materials for 3D filaments. As the reinforcing filler, expanded graphite, carbon fibers, and combinations thereof were used in various ratios up to 10%. The mechanical and thermal properties of virgin and recycled polyethylene phthalate glycol-modified (PETG) composite materials were determined. Almost all prepared composite materials were suitable for 3D printing and they have enhanced mechanical properties compared to the neat PETG matrices. Addition of the fillers to both polymer matrices has an only slight effect on the thermal stability, but the addition of carbon fibers significantly reduced the thermal expansion coefficient. The composites from cheaper recycled PETG have comparable properties to virgin PETG composites, which is of economic and ecological importance. New and cheaper materials can help expand 3D printing to manufacturing plants and the use of 3D printers for special applications.

Investigation was made into the effect of plasma treatment on the release kinetics of the drug Temozolomide (TMZ) from thin, biodegradable polyester films, comprising polylactic acid (PLA) and polyester urethane. The authors utilized two systems to achieve this, the first being diffuse coplanar surface barrier discharge, applying air as the gaseous medium, while the other involved capacitively coupled radio frequency discharge plasma under an argon atmosphere with hexamethyldisiloxane. Results showed that both forms of plasma treatment positively reduced the undesirable burst effect and benefited the release rate of TMZ. The hydrolytic degradability of the materials was slightly enhanced following hydrophilization, whereas the same diminished after hydrophobization had taken place. This was especially true for PLA due to modification of its wettability. GRAPHICAL ABSTRACT