The present paper concentrates on the toughness and the degree of crystallinity of the magnesium-catalyzed polyamide 6 rods cast in different diametres, which are commonly used for gear manufacturing. Its toughness cannot be regarded as a constant feature due to the casting technology. The mechanical properties of the semi-finished products are sensitive to the manufactured dimension, e.g., cast diameter, which are investigated by the Charpy impact test and tensile impact test. It is generally accepted that the impact strength and tensile-impact strength correlate with the degree of crystallinity beside many other material’s feature. Crystallinity is evaluated by Differential Scanning Calorimetry. The aim of this study is to determine the relationship between toughness and crystallinity of the magnesium-catalyzed cast PA6 rods with different diameters. For the research cast rods between 40 and 300 mm diameter were selected in seven-dimensional steps. Based on the results, it was found that the toughness depends strongly on the diameter size. Furthermore, it is proved that the crystallinity explains 62.3% of the variation of the Charpy’s impact strengths, while the tensile impact method was not suitable to detect the difference between the test samples.
In this paper, the properties of CuZn28 brass raw material were presented. The 3D printed metal specimens are made from this material with different orientations. Their mechanical properties (tensile strength, yield strength) and elongation were investigated according to MSZ EN 6892-1: 2012 standard. The strength of the different printing directions is analyzed and it is determined which printing direction is the most favourable. Finally, the effect of the different printing directions upon the structure of the material is studied.
The weight of polymer gears is increasing continuously due to their advantageous properties. This is the reason why in recent years traditional metal gears have been replaced by polymer counterparts in plethora applications. Despite their benefits, their load-carrying capacity is limited. The polymer gears become unable to operate and their teeth generally fail when the load exceeds a defined limit. It is required to explore the limit of polymer materials in gear field. In this work, the gears are manufactured by machine cutting. This paper aims to investigate the limit of load-carrying capacity and the lifetime of POM and PA6 G gears.
13 February 2018 in International Journal of Engineering and Management Sciences
We have studied the tensile-impact strength of the magnesium catalysed cast polyamide 6 (PA6) rods according to the EN ISO 8256:2004 standard. The purpose of our investigation was to follow: the mechanical properties of rods are mapped beside same casting technological process in case of different diameters. We have compared the received results with each other than have sought disparities. We examined cylindrical product (rod) in seven dimensional steps in diameter ranging from 40 mm to 300 mm. We have determined that the semi-finished products can be divided into two groups typically in case of their tensile-impact strengths in this size range. The tensile-impact strength is higher in case of the rods with a diameter of less than 100 mm and it is smaller in the larger dimension range. Therefore, the smallest tensile-impact strength can be established in case of the natural semifinished PA6 rods that each rod accomplishes independently of size. However, a range can be determined, which the tensile-impact strength values of product are separated according to the manufacturing size