Mariusz Jaśniok

Prof. Mariusz Jaśniok

Silesian University of Technology, Faculty of Civil Engineering
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2015 in Procedia Engineering
Verified
Journal Article
Open access
Tomasz JaśniokTomasz Jaśniok
Tomasz Jaśniok
Mariusz JaśniokMariusz Jaśniok
Mariusz Jaśniok
Electrochemical tests on corrosion rate of reinforcement were performed on six concrete specimens reinforced with a single bar equipped with temperature and concrete moisture sensors. The specimens were kept in a climatic and corrosion chamber where ambient temperature was changing discretely in a temperature range of 7°C ÷ 35°C, and similarly humid conditions were changing in a range of 30% ÷ 90%. The tests were also conducted on specimens immersed in water at 7°C and 35°C. Temperature and moisture content in concrete at the bar surface were monitored throughout the tests. The objective of this work was to analyse the influence of rapid changes in climatic conditions maintained for a few-day cycles, on corrosion rate of reinforcement in concrete. The tests demonstrated that the current corrosion process models for concrete reinforcement which assumed an immediate response of corrosion rate to a change in climatic conditions, was correct only for temperature



30 June 2009 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
Verified
Journal Article
Open access
Mariusz JaśniokMariusz Jaśniok
Mariusz Jaśniok
AZAdam Zybura
Adam Zybura
The presented model of carbonated concrete realkalization is compiled on the basis of the multi‐component medium theory equations. The process equations have been obtained from an analysis of the partial equations of mass, electric charge, momentum, energy, and entropy inequality. The experimental testing reported is related to a theoretical model which determines changes of ion concentrations in the pore solution of the cover, as a result of the realkalization. On the basis of the test results, the process equations have been simplified and formally transformed into the form of an equation for the OH– ions flow, coupled with the Na+ions transport. By solving the converse problem of this equation, the determinant OH– ions electro-diffusion coefficient is calculated and then, after taking the experimental test results into account, its numerical values, the range of stable solutions and the influence of the process non-stationariness are determined. Santrauka Karbonatizavusio betono šarminės terpės atkūrimo modelis sudarytas remiantis daugiakomponentės aplinkos teorijos lygtimis. Procesą aprašančios lygtys sudarytos atlikus masės balanso, elektros krūvio, judesio kiekio, energijos, taip pat entropijos nevienodumo parcialinių lygčių analizę. Eksperimentiniai tyrimai susieti su teoriniu modeliu apibrėžiant jonų koncentracijos pokytį tirpale apsauginio sluoksnio porose atkuriant šarminę terpę. Remiantis bandymų rezultatų analize, procesą aprašančios lygtys supaprastintos ir formaliai pertvarkytos į lygtis, aprašančias OH¯ jonų, susietų su Na+ jonais, pernešimu. Išsprendus šį uždavinį atvirkštiniu keliu, išreikštas OH¯ jonų elektrodifuzijos koeficientas ir, remiantis eksperimentinių tyrimų rezultatais, nustatyta jo skaitinė reikšmė, sunkiai skaidomų tirpalų sritis, taip pat proceso nepastovumo įtaka.

15 July 2021 in Materials
Verified
Journal Article
Open access
PDF file
Tomasz JaśniokTomasz Jaśniok
Tomasz Jaśniok
Mariusz JaśniokMariusz Jaśniok
Mariusz Jaśniok
ASArtur Aleksander Skórkowski
Artur Aleksander Skórkowski
This paper proposes a testing methodology for barrier properties of large non-conductive anti-corrosion coatings on steel structures. Electrochemical impedance spectroscopy (EIS) was adapted to in situ testing of steel structures by using a prototypical flexible measuring probe and a gel electrolyte that filled the probe, to take measurements on any surface regardless of its position. The first stage of the testing methodology was to perform time-consuming impedance measurements and quick electromagnetic measurements of coating thickness at selected test points. The results were used to determine correlation relationships between the logarithm of the impedance modulus for the coating at a measuring frequency of 0.1 Hz measured with the EIS method and the average thickness of the coating measured with an electromagnetic thickness gauge. Quick electromagnetic measurements were performed in the second stage to specify thickness of the other surface of the steel structure coating. The barrier properties of this coating were identified on the basis of the determined correlation.

1 January 2015 in Procedia Engineering
Verified
Journal Article
Open access
Mariusz JaśniokMariusz Jaśniok
Mariusz Jaśniok
Polarization tests by impedance spectroscopy were conducted on single rebars in rectangular concrete specimens. Five different polarized areas of reinforcement were determined by means of an insulation tape on steel bars. The tests were conducted on two series of concrete specimens, with and without chlorides. The tests indicated a very clear effect of spectra “scaling” in a function of the change in reinforcement polarization area. The observed phenomenon was explained on the basis of the original 3D model of steel–concrete system